The automation of the car charging process is motivated by the rapid development of technologies for self-driving cars and the increasing importance of ecological transportation units. Automation of this process requires the implementation of Computer Vision (CV) techniques. However, it remains challenging to precisely position the charger plug autonomously due to the sensitivity of CV algorithms to lighting and weather conditions. We introduce a novel robotic operation system based on hand gesture recognition through teleconferencing software. The users, connected by teleconference, use their hand gestures to teleoperate the electric plug located on the collaborative robot end-effector. We conducted a user study to evaluate the system performance and suitability using OmniCharger and two baseline interfaces (a UR10 Teach Pendant and a Logitech F710 Wireless Gamepad). Except for two trials, all the users were able to locate the plug inside of a 5 cm target using the interfaces. The distance to the target and the orientation error did not present statistically significant differences ( \(p=0.1099 \gt 0.05\) and \(p=0.0903 \gt 0.05\) , respectively) in the use of the three interfaces. The NASA-TLX questionnaire results showed low values in all the sub-classes, the SUS results rated the usability of the proposed interface above average (68%), and the UEQ showed excellent performance of the OmniCharger interface in the attractiveness, stimulation, and novelty attributes.

The growing use of robots in urban environments has raised concerns about potential safety hazards, especially in public spaces where humans and robots may interact. In this paper, we present a system for safe human-robot interaction that combines an infrared (IR) camera with a wearable marker and airflow potential field. IR cameras enable real-time detection and tracking of humans in challenging environments, while controlled airflow creates a physical barrier that guides humans away from dangerous proximity to robots without the need for wearable devices. A preliminary experiment was conducted to measure the accuracy of the perception of safety barriers rendered by controlled air pressure. In a second experiment, we evaluated our approach in an imitation scenario of an interaction between an inattentive person and an autonomous robotic system. Experimental results show that the proposed system significantly improves a participant's ability to maintain a safe distance from the operating robot compared to trials without the system.

Several technological solutions supported the creation of interfaces for Augmented Reality (AR) multi-user collaboration in the last years. However, these technologies require the use of wearable devices. We present CobotAR -a new AR technology to achieve the Human-Robot Interaction (HRI) by gesture recognition based on Deep Neural Network (DNN) - without an extra wearable device for the user. The system allows users to have a more intuitive experience with robotic applications using just their hands. The CobotAR system assumes the AR spatial display created by a mobile projector mounted on a 6 DoF robot. The proposed technology suggests a novel way of interaction with machines to achieve safe, intuitive, and immersive control mediated by a robotic projection system and DNN-based algorithm. We conducted the experiment with several parameters assessment during this research, which allows the users to define the positives and negatives of the new approach. The mental demand of CobotAR system is twice less than Wireless Gamepad and by 16% less than Teach Pendant.

Modern industry still relies on manual manufacturing operations and safe human-robot interaction is of great interest nowadays. Speed and Separation Monitoring (SSM) allows close and efficient collaborative scenarios by maintaining a protective separation distance during robot operation. The paper focuses on a novel approach to strengthen the SSM safety requirements by introducing haptic feedback to a robotic cell worker. Tactile stimuli provide early warning of dangerous movements and proximity to the robot, based on the human reaction time and instantaneous velocities of robot and op-erator. A preliminary experiment was performed to identify the reaction time of participants when they are exposed to tactile stimuli in a collaborative environment with controlled conditions. In a second experiment, we evaluated our approach into a study case where human worker and cobot performed collaborative planetary gear assembly. Results show that the applied approach increased the average minimum distance between the robot’s end-effector and hand by 44% compared to the operator relying only on the visual feedback. Moreover, the participants without the haptic support have failed several times to maintain the protective separation distance.