This paper considers a multi-functional orthogonal frequency division multiplexing (OFDM) system with integrated sensing, communication, and powering (ISCAP), in which a multi-antenna base station (BS) transmits OFDM signals to simultaneously deliver information to multiple information receivers (IRs), provide energy supply to multiple energy receivers (ERs), and sense potential targets based on the echo signals. To facilitate ISCAP, the BS employs the joint transmit beamforming design by sending dedicated sensing/energy beams jointly with information beams. Furthermore, we consider the beam scanning for sensing, in which the joint beams scan in different directions over time to sense potential targets. In order to ensure the sensing beam scanning performance and meet the communication and powering requirements, it is essential to properly schedule IRs and ERs and design the resource allocation over time, frequency, and space. More specifically, we optimize the joint transmit beamforming over multiple OFDM symbols and subcarriers, with the objective of minimizing the average beampattern matching error of beam scanning for sensing, subject to the constraints on the average communication rates at IRs and the average harvested power at ERs. We find converged high-quality solutions to the formulated problem by proposing efficient iterative algorithms based on advanced optimization techniques. We also develop various heuristic designs based on the principles of zero-forcing (ZF) beamforming, round-robin user scheduling, and time switching, respectively. Numerical results show that our proposed algorithms adaptively generate information and sensing/energy beams at each time-frequency slot to match the scheduled IRs/ERs with the desired scanning beam, significantly outperforming the heuristic designs.

This paper studies the transmit energy beamforming in a multi-antenna wireless power transfer (WPT) system, in which an access point (AP) equipped with a uniform linear array (ULA) sends radio signals to wirelessly charge multiple single-antenna energy receivers (ERs). Different from conventional energy beamforming designs that require the AP to acquire the channel state information (CSI) via training and feedback, we propose a new training-free energy beamforming approach assisted by wireless radar sensing, which is implemented based on the following two-stage protocol. In the first stage, the AP performs wireless radar sensing to estimate the path gain and angle parameters of the ERs for constructing the corresponding CSI. In the second stage, the AP implements the transmit energy beamforming based on the constructed CSI to efficiently charge these ERs in a fair manner. Under this setup, first, we jointly optimize the sensing beamformers and duration in the first stage to minimize the sensing duration, while ensuring a given accuracy threshold for parameters estimation subject to the maximum transmit power constraint at the AP. Next, we optimize the energy beamformers in the second stage to maximize the minimum harvested energy by all ERs. In this approach, the estimation accuracy threshold for the first stage is properly designed to balance the resource allocation between the two stages for optimizing the ultimate energy harvesting performance. Finally, numerical results show that the proposed training-free energy beamforming design performs close to the performance upper bound with perfect CSI, and outperforms the benchmark schemes without such joint optimization and that with isotropic transmission.

This paper studies a secure cell-free integrated sensing and communication (ISAC) system, in which multiple ISAC transmitters collaboratively send confidential information to multiple communication users (CUs) and concurrently conduct target detection. Different from prior works investigating communication security against potential information eavesdropping, we consider the security of both communication and sensing in the presence of information and sensing eavesdroppers that aim to intercept confidential communication information and extract target information, respectively. Towards this end, we optimize the joint information and sensing transmit beamforming at these ISAC transmitters for secure cell-free ISAC. Our objective is to maximize the detection probability over a designated sensing area while ensuring the minimum signal-to-interference-plus-noise-ratio (SINR) requirements at CUs. Our formulation also takes into account the maximum tolerable signal-to-noise ratio (SNR) constraints at information eavesdroppers for ensuring the confidentiality of information transmission, and the maximum detection probability constraints at sensing eavesdroppers for preserving sensing privacy. The formulated secure joint transmit beamforming problem is highly non-convex due to the intricate interplay between the detection probabilities, beamforming vectors, and SINR constraints. Fortunately, through strategic manipulation and via applying the semidefinite relaxation (SDR) technique, we successfully obtain the globally optimal solution to the design problem by rigorously verifying the tightness of SDR. Furthermore, we present two alternative joint beamforming designs based on the sensing SNR maximization over the specific sensing area and the coordinated beamforming, respectively. Numerical results reveal the benefits of our proposed design over these alternative benchmarks.

This paper investigates the performance tradeoff for a multi-antenna integrated sensing and communication (ISAC) system with simultaneous information multicasting and multi-target sensing, in which a multi-antenna base station (BS) sends the common information messages to a set of single-antenna communication users (CUs) and estimates the parameters of multiple sensing targets based on the echo signals concurrently. We consider two target sensing scenarios without and with prior target knowledge at the BS, in which the BS is interested in estimating the complete multi-target response matrix and the target reflection coefficients/angles, respectively. First, we consider the capacity-achieving transmission and characterize the fundamental tradeoff between the achievable rate and the multi-target estimation Cramér-Rao bound (CRB) accordingly. To this end, we design the optimal transmit signal covariance matrix at the BS to minimize the estimation CRB for each of the two scenarios, subject to the minimum multicast rate requirement and the maximum transmit power constraint. It is shown that the optimal covariance matrix consists of two parts for ISAC and dedicated sensing, respectively. Next, we consider the transmit beamforming designs, in which the BS sends one information beam together with multiple a-priori known dedicated sensing beams for effective ISAC and each CU can cancel the interference caused by the sensing signals. By exploiting the successive convex approximation (SCA) technique, we develop efficient algorithms to obtain the joint information and sensing beamforming solutions to the resultant rate-constrained CRB minimization problems. Finally, we provide numerical results to validate the CRB-rate (C-R) tradeoff achieved by our proposed designs, as compared to two benchmark schemes, namely the isotropic transmission and the joint beamforming without sensing interference cancellation. It is shown that the proposed optimal transmit covariance solution achieves much better C-R performance than the benchmark schemes and the proposed joint beamforming with sensing interference cancellation performs close to the optimal transmit covariance solution when the number of CUs is small. We also conduct simulations to show the practical estimation performance achieved by our proposed designs, by considering randomly generated information signals and practical estimators.

This paper studies a downlink secure integrated sensing and communication (ISAC) system, in which a multi-antenna base station (BS) transmits confidential messages to a single-antenna communication user (CU) while performing sensing on targets that may act as suspicious eavesdroppers. To ensure the quality of target sensing while preventing their potential eavesdropping, the BS combines the transmit confidential information signals with additional dedicated sensing signals, which play a dual role of artificial noise (AN) for degrading the qualities of eavesdropping channels. Under this setup, we jointly design the transmit information and sensing beamforming, with the objective of minimizing the weighted sum of beampattern matching errors and cross-correlation patterns for sensing subject to secure communication constraints. The robust design takes into account the channel state information (CSI) imperfectness of the eavesdroppers in two practical CSI error scenarios. First, we consider the scenario with bounded CSI errors of eavesdroppers, in which the worst-case secrecy rate constraint is adopted to ensure secure communication performance. In this scenario, we present the optimal solution to the worst-case secrecy rate constrained sensing beampattern optimization problem, by adopting the techniques of S-procedure, semi-definite relaxation (SDR), and a one-dimensional (1D) search, for which the tightness of the SDR is rigorously proved. Next, we consider the scenario with Gaussian CSI errors of eavesdroppers, in which the secrecy outage probability constraint is adopted. In this scenario, we present an efficient algorithm to solve the more challenging secrecy outage-constrained sensing beampattern optimization problem, by exploiting the convex restriction technique based on the Bernstein-type inequality, together with the SDR and 1D search. Finally, numerical results show that the proposed designs can properly adjust the information and sensing beams to balance the tradeoffs among communicating with CU, sensing targets, and confusing eavesdroppers, so as to achieve desirable sensing transmit beampatterns while ensuring the CU’s secrecy requirements for the two scenarios.

This paper studies a secrecy integrated sensing and communication (ISAC) system, in which a multi-antenna base station (BS) aims to send confidential messages to a single-antenna communication user (CU), and at the same time sense several targets that may be suspicious eavesdroppers. To ensure the sensing quality while preventing the eavesdropping, we consider that the BS sends dedicated sensing signals (in addition to confidential information signals) that play a dual role of artificial noise (AN) for confusing the eavesdropping targets. Under this setup, we jointly optimize the transmit information and sensing beamforming at the BS, to minimize the matching error between the transmit beampattern and a desired beampattern for sensing, subject to the minimum secrecy rate requirement at the CU and the transmit power constraint at the BS. Although the formulated problem is non-convex, we propose an algorithm to obtain the globally optimal solution by using the semidefinite relaxation (SDR) together with a one-dimensional (1D) search. Next, to avoid the high complexity induced by the 1D search, we also present two sub-optimal solutions based on zero-forcing and separate beamforming designs, respectively. Numerical results show that the proposed designs properly adjust the information and sensing beams to balance the tradeoffs among communicating with CU, sensing targets, and confusing eavesdroppers, thus achieving desirable transmit beampattern for sensing while ensuring the CU’s secrecy rate.

This paper studies the problem of predicting the spectrum efficiency (SE) for massive multiple-input multiple-output (MIMO) empowered 5G networks based on the reference signal received power (RSRP) collected from the drive test (DT). This problem is challenging because there is no precise model between the RSRP and the SE. The SE not only depends on the RSRP, which only captures the statistic of the channel, but also the beamforming strategy of the serving base station (BS) and the interference from the neighboring cells, which are not measured at the 5G client. This paper adopts a model-assisted data-driven approach to develop a machine learning model for the SE prediction. Specifically, a joint interference and SE prediction network is built, demonstrating prediction improvement over pure data-driven neural networks. In addition, a classification-assisted SE prediction network is constructed, which substantially reduces the prediction error at the low SE regime with marginally compromising the total prediction error. It is found that the model-assisted approach generally enhances the SE prediction accuracy by 2% approximately over a purely data-driven approach.