Reconfigurable intelligent surface (RIS) is emerging as a promising technology for next-generation wireless communication networks, offering a variety of merits such as the ability to tailor the communication environment. Moreover, deploying multiple RISs helps mitigate severe signal blocking between the base station (BS) and users, providing a practical and efficient solution to enhance the service coverage. However, fully reaping the potential of a multi-RIS aided communication system requires solving a non-convex optimization problem. This challenge motivates the adoption of learning-based methods for determining the optimal policy. In this paper, we introduce a novel heterogeneous graph neural network (GNN) to effectively leverage the graph topology of a wireless communication environment. Specifically, we design an association scheme that selects a suitable RIS for each user. Then, we maximize the weighted sum rate (WSR) of all the users by iteratively optimizing the RIS association scheme, and beamforming designs until the considered heterogeneous GNN converges. Based on the proposed approach, each user is associated with the best RIS, which is shown to significantly improve the system capacity in multi-RIS multi-user millimeter wave (mmWave) communications. Specifically, simulation results demonstrate that the proposed heterogeneous GNN closely approaches the performance of the high-complexity alternating optimization (AO) algorithm in the considered multi-RIS aided communication system, and it outperforms other benchmark schemes. Moreover, the performance improvement achieved through the RIS association scheme is shown to be of the order of 30%.

Recently, Federated Learning (FL) has revolutionized the processing and analysis of vast volumes of data generated by wireless devices, effectively overcoming the traditional cloud computing constraints within Internet of Things (IoT) networks. However, practical challenges arise as data on edge devices dynamically changes, necessitating continuous learning capabilities known as Federated Continual Learning (FCL). One key challenge in FCL is the issue of catastrophic forgetting, which refers to preserving the training performance on old data while training on new data. While common strategies involve retaining a subset of old data to mitigate the issue, privacy concerns limit this approach, and the balance between emphasis on new and old data during the training process remains inadequately studied. To address the above challenges, we propose an Adaptive Federated Continual Learning (AdapFCL) method in heterogeneous environment, which eliminates the need for episodic memory in federated settings. Specifically, the server employs a Deep Convolutional Generative Adversarial Network (DCGAN) model with a data-free knowledge distillation technique, which enables the server to learn representations of old data and generate synthetic data involving only global model. Then clients perform local training by utilizing new data and synthetic data instead of storing old data. Furthermore, we quantify the degree of forgetting on old data for each client, allowing for adaptive adjustment of emphasis weights for old and new data during the training process. Simulation results validate that the proposed method can achieve superior average test accuracy while maintaining communication efficiency compared with baselines, especially in highly heterogeneous data scenarios.

In this paper, we study the problem of joint active and passive beamforming for reconfigurable intelligent surface (RIS)-assisted massive multiple-input multiple-output systems to-wards the extension of the wireless cellular coverage in 3D, where multiple RISs, each equipped with an array of passive elements, are deployed to assist a base station (BS) to simultaneously serve multiple unmanned aerial vehicles (UAVs) in the same time-frequency resource of 5G wireless communications. With a focus on ensuring fairness among UAVs, our objective is to maximize the minimum signal-to-interference-plus-noise ratio (SINR) at UAVs by jointly optimizing the transmit beamforming parameters at the BS and phase shift parameters at RISs. We propose two novel algorithms to address this problem. The first algorithm aims to mitigate interference by calculating the BS beamforming matrix through matrix inverse operations once the phase shift parameters are determined. The second one is based on the principle that one RIS element only serves one UAV and the phase shift parameter of this RIS element is optimally designed to compensate the phase offset caused by the propagation and fading. To obtain the optimal parameters, we utilize one state-of-the-art reinforcement learning algorithm, deep deterministic policy gradient, to solve these two optimization problems. Simulation results are provided to illustrate the effectiveness of our proposed solution and some insightful remarks are observed.

Reconfigurable intelligent surfaces (RISs) have become a promising technology to meet the requirements of energy efficiency and scalability in future six-generation (6G) communications. However, a significant challenge in RISs-aided communications is the joint optimization of active and passive beamforming at base stations (BSs) and RISs respectively. Specif-ically, the main difficulty is attributed to the highly non-convex optimization space of beamforming matrices at both BSs and RISs, as well as the diversity and mobility of communication scenarios. To address this, we present a greenly gradient based meta learning beamforming (GMLB) approach. Unlike traditional deep learning based methods which take channel information directly as input, GMLB feeds the gradient of sum rate into neural networks. Coherently, we design a differential regulator to address the phase shift optimization of RISs. Moreover, we use the meta learning to iteratively optimize the beamforming matrices of BSs and RISs. These techniques make the proposed method to work well without requiring energy-consuming pretraining. Simulations show that GMLB could achieve higher sum rate than that of typical alternating optimization algorithms with the energy consumption by two orders of magnitude less.

Accurate localization of mobile terminals is crucial for integrated sensing and communication systems. Existing fingerprint localization methods, which deduce coordinates from channel information in pre-defined rectangular areas, struggle with the heterogeneous fingerprint distribution inherent in non-line-of-sight (NLOS) scenarios. To address the problem, we introduce a novel multi-source information fusion learning framework referred to as the Autosync Multi-Domain NLOS Localization (AMDNLoc). Specifically, AMDNLoc employs a two-stage matched filter fused with a target tracking algorithm and iterative centroid-based clustering to automatically and irregularly segment NLOS regions, ensuring uniform fingerprint distribution within channel state information across frequency, power, and time-delay domains. Additionally, the framework utilizes a segment-specific linear classifier array, coupled with deep residual network-based feature extraction and fusion, to establish the correlation function between fingerprint features and coordinates within these regions. Simulation results demonstrate that AMDNLoc significantly enhances localization accuracy by over 40% compared with traditional convolutional neural networks on the wireless artificial intelligence research dataset.

The development of Unmanned Aerial Vehicles (UAVs) offers new prospects for emerging applications in the Industrial Internet of Things (IIoT) networks. With the assistance of Digital Twin (DT), a real-time understanding of physical entities can be constructed for dynamic perception and decision-making. However, DT modeling requires distributed data aggregation, resulting in privacy disclosure and communication burden. Therefore, we propose the digital twin edge network by integrating the DT technology and edge computing, which leverages an over-the-air computation enabled federated learning architecture for an efficient and secure DT model construction. Specifically, we propose a heterogeneity-aware and energy-conscious device scheduling mechanism, considering the update importance, channel condition, and computation capacity based on a probabilistic scheduling framework. To enhance energy efficiency, we introduce a virtual queue to track the difference between the cumulative energy consumption and budget. Additionally, we design a low-complexity scheduling algorithm to solve the optimization problem. Simulation results validate the superiority of our proposed mechanism in improving the test accuracy and energy efficiency in a heterogeneous and energy-constrained environment. Moreover, the proposed mechanism demonstrates significant advantages when employed to highly heterogeneous datasets, and exhibits a certain level of robustness to mapping errors arising from the utilization of DT technique.

Automatic modulation classification (AMC) is an indispensable part of intelligent receivers in modern wireless communication systems. AMC enables blind identification of modulation without prior knowledge of the signal parameters, which is a challenging task, particularly in practical scenarios with severe multipath fading, frequency-selective and time-varying channels. Although deep learning techniques have been shown to be efficient in AMC tasks, traditional convolutional and recurrent neural networks may not be able to cope with complex-valued input signals and large-scale datasets. Motivated by this, in this paper, we propose a novel perceiver-based AMC architecture that leverages the recently introduced Perceiver, which combines cross-attention and latent transformer modules, to efficiently process and classify complex-valued in-phase and quadrature (IQ) samples of the received signal. The proposed model is trained and evaluated on the DeepSig 2018 RadioML dataset. Simulation results demonstrate a significant improvement in the classification accuracy compared to a ResNet-based AMC model, particularly for higher-order quadrature amplitude modulation (QAM) and under practical signal-to-noise ratio values. These findings indicate the potential of the perceiver architecture for robust and efficient AMC in wireless communication systems.

In recent years, mobile edge computing (MEC) has been proposed as a promising technique to alleviate the challenges faced by delay and computation-intensive applications. However, users in remote and mountainous areas continue to face difficulties obtaining reliable computation services. To overcome this obstacle, unmanned aerial vehicles (UAVs) equipped with MEC servers have emerged as a popular solution. In such a multi-UAV network, the coverage areas of the UAVs might overlap, which would result in resource wastage and interference. To address this issue, we investigate a collaborative UAV-assisted MEC system for both aerial users (AUs) and ground users (GUs) in this work. Specifically, each user is covered by multiple UAV servers, and the resources of UAVs are dynamic over time. The main objective of this work is to reduce the average delay and improve the service success rate by jointly designing the UAV server-user association, bandwidth, and computing resource allocation strategy. To address the non-convex optimization problem mentioned above, we formulate a multi-agent extension of Markov decision processes (MDPs) for the system and design a cooperative Multi-Agent Twin Delayed Deep Deterministic Policy Gradient (MATD3) approach for each UAV server to make decisions using a centralized training approach with distributed execution. Simulation results validate that the proposed approach can achieve a superior success service rate with a lower delay compared with baselines.