Power management, while indispensable for the working of battery-free devices on fragile ambient energy, unfortunately, also entails excessive workloads that consume the scarce harvested energy. Existing efforts aimed at addressing this typically manage to tackle only a fraction of the challenges, leaving power management as a painful Achilles’ heel for battery-free devices. In this paper, we systematically analyze the full-flow of power management and propose μ Man, a painless architecture with no extra workload on battery-free devices. That is, we shift the entire workload of power management from the resource-constrained battery-free devices to the resource-rich gateway. For this goal, we design a near-zero-power sampling-free monitoring mechanism to transparently piggyback the power status of the device directly onto the uplink signal waveform. Based on these real-time statuses, the gateway can take over the required computation and issue the resultant energy allocations back to devices. The design is fully transparent to the devices, and the devices can even remain in deep sleep during the whole process to minimize energy consumption. The experiments show that μ Man can reduce the energy consumption of power management by 97.2%, improve the power efficiency by 53%, and reduce the minimum energy requirements for the device start-up by 5.8 ×.

Recent advances in backscatter communication have exhibited great advantages on uplink, both in power consumption and communication performance. However, their downlink tends to lag far behind due to stringent on-device power constraints. This paper presentsSisyphus, a novel communication paradigm designed to empower backscatter devices with LoRa downlink. To achieve this, we propose a novel receiver design for passive coherent demodulation of LoRa. In this design, we creatively couple LoRa’s down-conversion with de-chirping (dc2), leveraging the processing gain brought by chirp spread spectrum (CSS) modulation to boost communication range without the need for additional power supply. Moreover, we exploit the cyclical time-frequency feature intrinsic to LoRa for demodulation, and a low-power analog-digital signal processing circuit with negligible power is devised to replace the existing power-intensive sampling and costly digital computation. We prototype Sisyphus for proof-of-concept, and comprehensive experimental results demonstrate that Sisyphus can achieve significant power savings compared to legacy LoRa receiver while retaining the anti-interference ability of legacy LoRa. We envision that the design of Sisyphus can unlock the potential for broader applications of LoRa-based backscatter devices.

Battery-free nodes harvest ambient energy, accelerating large-scale IoT (Internet of Things) deployment. However, sporadic beginnings and ends of power failures impede collaboration, obstructing the execution of complex applications. The prior collaborative protocols have high energy demands and lack scalability. This paper introduces Cupid, a novel scheduling architecture that employs a coordinator device to circumvent the collaborative energy bottleneck, enhancing the scalability of battery-free node collaboration. Cupid employs an efficient crosslayer communication protocol to offload energy-intensive tasks to the coordinator. To reduce latency from non-local execution, we propose a predictive scheduling algorithm based on curve fitting. Additionally, we implement a circuit on the node side for ultra-low-power upload and download capabilities. We implement a prototype and conduct extensive evaluations. Compared to the state-of-the-art, it is the first to achieve intermittent coordination in medium-scale EH-WSNs, reducing latency by 94.56%.

The Internet of Things (IoT) can only thrive if IoT sensor nodes can be effortlessly deployed and maintained without compromising their general-purpose nature. However, existing low-power sensor systems fail to strike a balance between these two issues, leaving the widespread of IoT sensor nodes as an open problem. In this paper, we propose LEGO+ as a minimalist yet general-purpose sensing edge-end architecture. Instead of running embedded software on a redundant general-purpose microprocessor, LEGO+ can directly construct the desired control functionality for various IoT sensing applications through hardware-level logic orchestration. To achieve this, we first conduct an in-depth analysis of the underlying unit behaviors within IoT sensor systems and, based on this, abstract a uniform logic orchestration model. Next, to enable sensor nodes to comprehend and execute the generated logic, we devise a hierarchical atomic control circuit with negligible overheads. Finally, we develop a task state prediction scheme to further improve the overall operation efficiency among multiple nodes. We prototype LEGO+ for proof-of-concept and conduct comprehensive experiments, and the results demonstrate that LEGO+ can reduce the overall power consumption of sensor nodes by 86% and enhance task efficiency by 49%, thereby facilitating a wider array of IoT sensing applications.

Large-scale IoT sensor deployment calls for inexpensive, low-power sensor nodes that still perform long-range, large-scale networking at the system level. However, current sensor nodes are constructed according to the 'one-size-fits-all’ embedded design, where the processor and RF transceiver are indispensable but underutilized in low-duty cycles, resulting in overwhelmingly significant unit price and run-time power. In this paper, we propose a novel processor-sharing IoT architecture that converts the vast majority of sensor nodes from embedded computers to low-end RF peripherals. The conventional full-fledged sensor nodes are smashed into the air, and the scattered chips are scaled well with negligible overheads through a virtual I$^{2}$C bus calledRFBus. Specifically, RFBus interface is designed to be backward compatible with the I$^{2}$C bus interface, and thus, RFBus network inherits versatile link layer services transparently from the well-established I$^{2}$C link layer protocol. We design RFBus with joint consideration of system-level performance and deployment costs and evaluate the prototypes both indoors and outdoors. The result indicates that the proposed architecture achieves 6.09 × (indoor) and 6.69 × (outdoor) energy saving and reduces the unit price of sensor nodes by 23.5% (indoor) and 33.5% (outdoor).

Legacy LoRa receiver adopts a superheterodyne architecture with a runtime power consumption of up to 100mW, resulting in its low-power promise can only be delivered in low duty-cycle mode. This paper presents Sisyphus as an ultra-low-power LoRa receiver, ensuring around-the-clock LoRa availability while extending battery life significantly. To achieve this, we propose a novel receiver design for passive coherent demodulation of LoRa. In this design, we creatively couple LoRa's down-conversion with de-chirping (dc2), leveraging the processing gain brought by chirp spread spectrum (CSS) modulation to boost communication range without the need for additional power supply. Moreover, we exploit the cyclical time-frequency feature intrinsic to LoRa for demodulation, and a low-power analog-digital signal processing circuit with negligible power is devised to replace the existing power-intensive sampling and costly digital computation. We prototype Sisyphus for proof-of-concept, and comprehensive experimental results demonstrate that Sisyphus can achieve significant power savings compared to legacy LoRa receiver while retaining the anti-interference ability of legacy LoRa. We envision that the design of Sisyphus can unlock the potential for broader applications of LoRa.

Large-scale IoT sensor deployment calls for inexpensive, low-power sensor nodes that still perform long-range, large-scale networking at the system level. However, current sensor nodes are constructed according to the `one-size-fits-all' embedded design, where the processor and RF transceiver are indispensable but underutilized in low-duty cycles, resulting in overwhelmingly significant unit price and run-time power. In this paper, we propose a novel processor-sharing IoT architecture that converts the vast majority of sensor nodes from embedded computers to low-end RF peripherals. The conventional full-fledged sensor nodes are smashed into the air, and the scattered chips are scaled well with negligible overheads through a virtual I2C bus called RFBus. Specifically, the RFBus interface is designed to be backward compatible with the I2C bus interface, and thus, the RFBus network inherits versatile link layer services transparently from the well-established I2C link layer protocol. We design the RFBus with a joint consideration of system-level performance and deployment costs and evaluate the prototypes in indoor and outdoor scenarios. The result indicates that the proposed architecture achieves 6.09 x (indoor) and 6.69 x (outdoor) energy saving and reduces the unit price of sensor nodes by 23.5% (indoor) and 33.5% (outdoor).

The rapid development of IoT applications calls for re-configurable IoT devices that can easily extend new functionality on demand. However, in the current architecture, updating chip functions on the end device is highly coupled with the local microprocessor in both hardware and software aspects, leading to inadequate flexibility. In this paper, we propose LEGO, a lightweight architecture with chip-level plug-and-play capabilities for IoT end devices. To achieve this, we first decoupling the control over heterogeneous chips from end devices to the gateway, and design a novel Unified Chip Description Language (UCDL) to access various types of functional chips uniformly. To supporting chips plug-and-play, we design a novel signal converting circuit on end devices to generate all required underlying signals for chip control. We also design a layered instruction orchestrator and hierarchical scheduler to minimize transmission overhead. The results show that our LEGO system can respond to chips plug-and-play within 0.13 seconds, and the lightweight architecture could reduce 49%$\sim$61% of power consumption in practical scenarios compared with traditional IoT end devices that are controlled by a microprocessor. The lightweight and easy-to-deploy features of LEGO makes it helpful to reduce deployment cost, thus conducive to accelerating large-scale applications.

Unsupervised domain adaptation (UDA) transfers knowledge from a labeled source domain to an unlabeled target domain on cross-domain object recognition by reducing a distribution discrepancy between the source and target domains (interdomain discrepancy). Prevailing methods on UDA were presented based on the premise that target data are collected in advance. However, in online scenarios, the target data often arrive in a streamed manner, such as visual image recognition in daily monitoring, which means that there is a distribution discrepancy between incoming target data and collected target data (intradomain discrepancy). Consequently, most existing methods need to re-adapt the incoming data and retrain a new model on online data. This paradigm is difficult to meet the real-time requirements of online tasks. In this study, we propose an online UDA framework via jointly reducing interdomain and intradomain discrepancies on cross-domain object recognition where target data arrive in a streamed manner. Specifically, the proposed framework comprises two phases: classifier training and online recognition phases. In the former, we propose training a classifier on a shared subspace where there is a lower interdomain discrepancy between the two domains. In the latter, a low-rank subspace alignment method is introduced to adapt incoming data to the shared subspace by reducing the intradomain discrepancy. Finally, online recognition results can be obtained by the trained classifier. Extensive experiments on DA benchmarks and real-world datasets are employed to evaluate the performance of the proposed framework in online scenarios. The experimental results show the superiority of the proposed framework in online recognition tasks.

Versatile Internet of Things (IoT) applications call for re-configurable IoT devices that can easily extend new functionality on demand. However, the heterogeneity of functional chips brings difficulties in device customization, leading to inadequate flexibility. In this paper, we propose LEGO, a novel architecture for chip-level re-configurable IoT devices that supports plug-and-play with Commercial Off-The-Shelf (COTS) chips. To combat the heterogeneity of functional chips, we first design a novel Unified Chip Description Language (UCDL) with meta-operation and chip specifications to access various types of functional chips uniformly. Then, to achieve chips plug-and-play, we build up a novel platform and shift all chip control logic to the gateway, which makes IoT devices entirely decoupled from specific applications and does not need to make any changes when plugging in new functional chips. Finally, to handle communications overheads, we built up a novel orchestration architecture for gateway instructions, which minimizes instruction transmission frequency in remote chip control. We implement the prototype and conduct extensive evaluations with 100+ types of COTS functional chips. The results show that new functional chips can be automatically accessed by the system within 0.13 seconds after being plugged in, and only bringing 0.53 kb of communication load on average, demonstrating the efficacy of LEGO design.

Designing ultra-low power RFID sensor tags is a major challenge, especially when incorporating a micro-controller (MCU) to operate sensors. While simplifying MCU functionality can reduce power consumption, it has limited effect as the fundamental information transformation is necessary for communication between the RFID reader and the sensor. Unfortunately, information transformation requires baseband sampling and processing, which consumes significant power on passive RFID tags. This paper proposes a novel approach that enables the reader to communicate directly with the sensor, eliminating the need for information transformation of MCU. We address the unique challenges posed by the physical and link layers of the EPC Gen2 protocol and introduce GoodID, a cross-layer design for next-generation RFID sensor tags featuring ultra-low power consumption. We prototype the GoodID tag for proof-of-concept and demonstrate significant power benefits through experimental results.

Electrocardiogram (ECG) signal based cross-subject emotion recognition methods reduce the influence of individual differences using domain adaptation (DA) techniques. These methods generally assume that the entire unlabeled data of unknown target subjects are available in training phase. However, this assumption does not hold in some practical scenarios where the data of target subjects arrive one by one in an online manner instead of being acquired at a time. Thus, existing DA methods cannot be directly applied in this case since the unknown target data is inaccessible in training phase. To tackle the problem, we propose a novel online cross-subject ECG emotion recognition method leveraging hypergraph-based online transfer learning (HOTL). Specifically, the proposed hypergraph structure is capable of learning the high-order correlation among data, such that the recognition model trained on source subjects can be more effectively generalized to target subjects. Meanwhile, the structure can be easily updated by adding a hyperedge which connects a newly coming sample with the current hypergraph, resulting in further reduce the individual differences in online manner without re-training the model. Consequently, HOTL can effectively deal with the online cross-subject scenario where unknown target ECG data arrive one by one and varying overtime. Extensive experiments conducted on the Amigos dataset validate the superiority of the proposed method.

Differing from tremendous existing works that mainly focus on optimizing backscatter communication, Radio-to-Bus (R2B) communication utilizes backscatter to offload processors from IoT devices to the gateway, achieving processor-free devices of significantly reduced power and hardware cost. However, R2B communication is not suitable for large-scale backscatter networks, since R2B cannot support parallel and long-range communication between the gateway and hundreds of R2B devices. In this article, we present Chipnet, a network that supports hundreds of long-range and concurrent connections between the gateway and multiple processor-free devices. The high-level design of Chipnet includes a parallel frequency-division uplink mechanism that can work on processor-free devices and a processor-free MAC layer protocol that supports gateway to broadcast downlink data and individually manage each processor-free device. This design addresses practical issues facing the processor-free device architecture, such as synchronizing hundreds of processor-free devices, assigning unique channel frequencies to every device, and realizing power-efficient processor-free signal conversion. The results demonstrate that a Chipnet network can achieve a task throughput of 2,400 tasks/s with a latency of 72.23 ms. Compared with the R2B network, Chipnet achieves 3×–5× improvements in network coverage range and two orders of magnitude improvement in both network throughput and network latency.