Recent years have witnessed considerable efforts in repurposing ubiquitous wireless communication signals for non-contact sensing.$\bf{NearLink}$is a new-generation short-range wireless communication protocol, which is designed to address the high-quality network connectivity requirements of low power, low latency and high reliability. Given these notable advantages, NearLink has great potential for widespread application in various Internet of Things (IoT) areas. However, NearLink-based wireless sensing has not yet been explored. To bridge this gap, this work explores for the first time the sensing potential and opportunities of NearLink. Specifically, we systematically investigate the sensing capability of NearLink through answering two key questions: (1) How can NearLink's communication-oriented signals be adapted for sensing tasks? (2) How can sensing performance be enhanced under multipath interference and low-power constraints? We prototype the NearLink sensing system-NearSense, and take the respiration detection as a case study to demonstrate its effectiveness. Extensive experiments demonstrate that NearSense can achieve an average detection rate of 98% and a false alarm rate below 1.5% in case of various real-life challenging interference. We believe this work opens up new directions for the new-generation wireless sensing towards high-quality network connections.

Despite intensive research efforts in radio frequency noncontact sensing, capturing fine-grained geometric properties of objects, such as shape and size, remains an open problem using commodity WiFi devices. Prior attempts are incapable of characterizing object shape or size because they predominantly rely on weak signals reflected off objects in a very small number of directions. In this paper, motivated by the observation that the diffracted signals around an object between two WiFi devices carry the contour information of the object, we formulate the problem of reconstructing the 2D target profile and develop WiProfile, the first WiFi-based system that unlocks the diffraction effects for target profiling. We introduce a CSI-Profile model to characterize the relationship between the CSI measured at different target positions and the target profile in the diffraction zone. With suitable approximations, the inverse problem of deriving the target profile from CSI can be solved by the inverse Fresnel transform. To mitigate CSI measurement errors on commodity WiFi devices, we propose a novel antenna placement strategy. Comprehensive experiments demonstrate that WiProfile can accurately reconstruct profiles with median absolute errors of less than 1 cm under various conditions, and effectively estimate the profiles of everyday objects of diverse shapes, sizes, and materials. We believe this work opens up new directions for fine-grained target imaging using commodity WiFi devices.

While a large range of sensing applications such as activity sensing and vital sign monitoring have been realized with WiFi sensing, using commercial WiFi devices to obtain fine-grained size information of objects remains challenging due to the narrow bandwidth of WiFi. Very recent studies attempted to measure object sizes using WiFi signals. However, these systems are still far from practical with a lot of limitations including requiring multiple transceiver pairs and can only measure one-dimensional size, hindering their real-life adoption. Also, these systems rely on Channel State Information (CSI) to work, which is only available on few commercial WiFi cards. In this work, we propose to employ a new channel data, i.e., Beamforming Feedback Information (BFI), widely available on almost all new generation WiFi cards for fine-grained size measurement. Through thoroughly analyzing the mathematical relationship between BFI and CSI, we show how to use BFI to achieve fine-grained size measurement. We propose a novel method to accurately measure the two-dimensional size of an object using a single transceiver pair by identifying the positions of singularities when the object passes through the diffraction zone of the transceiver pair. Experiment results show that Wi2DMeasure can accurately measure the two-dimensional size of objects under various conditions, achieving a small median error of only 3.7 mm.

Although WiFi-based contactless sensing has made significant progress in the past decade, most prior work still focus on the reflection zone far from WiFi transceivers, while few studies explore the diffraction zone near transceivers. Additionally, previous diffraction models only consider the CSI amplitude signal and ignore the impact of multipath. In this work, we develop an accurate diffraction model to characterize the relationship between both CSI amplitude and phase and target's movement in the diffraction zone. We further put forward the deformation forms of the model under static multipath conditions and find that the CSI patterns vary significantly with multipath. Consequently, the common assumption of a one-to-one mapping between CSI patterns and activities in existing work fails due to multipaths, degrading sensing performance when multipath changes. To address this challenge, we propose to extract a relative change pattern from CSI signals to recover the one-to-one mapping relations and eliminate the impact of static multipath. Extensive experiments under various multipath conditions demonstrate an accuracy higher than 96% for the coarse-grained intrusion detection and an average error rate of 0.6 bpm for the fine-grained respiration monitoring.

Enabling pervasive WiFi devices with non-contact sensing capability is an important topic in the field of integrated sensing and communication. Doppler effect has been widely exploited to estimate targets’ velocity from wireless signals. However, the separation of signal sources and receivers complicates the relationship between Doppler frequency shift (DFS) and target velocity in WiFi-based non-contact sensing systems. In contrast to existing works that rely on either approximated relations or coarse-grained information such as whether a target is moving toward or away from WiFi transceivers, this paper investigates rigorously the dependency of velocity estimation accuracy on target locations and headings in WiFi sensing systems. The theoretical insights allow us to derive a closed-form solution and understand the fundamental limitation of velocity estimation. To optimize velocity estimation performance, we devise a receiving device selection scheme that dynamically chooses the optimal set of receivers among multiple available WiFi devices. A prototype real-time target tracking system has been implemented using commodity WiFi devices. Extensive experimental results show that the proposed system outperforms state-of-the-art approaches in velocity estimation and tracking, and is able to achieve$9.38cm/s$, 13.42°,$31.08cm$median errors in speed, heading and location estimation amongst experiments conducted in three indoor environments with three device placements and eight human subjects over 15 trajectories.