Despite significant advancements in deep learning-based CSI compression, some key limitations remain unaddressed. Current approaches predominantly treat CSI compression as a source-coding problem, thereby neglecting transmission errors. Conventional separate source and channel coding suffers from the cliff effect, leading to significant deterioration in reconstruction performance under challenging channel conditions. While existing autoencoder-based compression schemes can be readily extended to support joint source-channel coding, they struggle to capture complex channel distributions and exhibit poor scalability with increasing parameter count. To overcome these inherent limitations of autoencoder-based approaches, we propose Residual-Diffusion Joint Source-Channel Coding (RD-JSCC), a novel framework that integrates a lightweight autoencoder with a residual diffusion module to iteratively refine CSI reconstruction. Our flexible decoding strategy balances computational efficiency and performance by dynamically switching between low-complexity autoencoder decoding and sophisticated diffusion-based refinement based on channel conditions. Comprehensive simulations demonstrate that RD-JSCC significantly outperforms existing autoencoder-based approaches in challenging wireless environments. Furthermore, RD-JSCC offers several practical features, including a low-latency 2-step diffusion during inference, support for multiple compression rates with a single model, robustness to fixed-bit quantization, and adaptability to imperfect channel estimation.

The design of reliable and efficient codes for channels with feedback remains a longstanding challenge in communication theory. While significant improvements have been achieved by leveraging deep learning techniques, neural codes often suffer from high computational costs, a lack of interpretability, and limited practicality in resource-constrained settings. We focus on designing low-complexity coding schemes that are interpretable and more suitable for communication systems. We advance both analytical and neural codes. First, we demonstrate that PowerBlast, an analytical coding scheme inspired by Schalkwijk-Kailath (SK) and Gallager-Nakiboğlu (GN) schemes, achieves notable reliability improvements over both SK and GN schemes, outperforming neural codes in high signal-to-noise ratio (SNR) regions. Next, to enhance reliability in low-SNR regions, we propose LightCode, a lightweight neural code that achieves state-of-the-art reliability while using a fraction of memory and compute compared to existing deep-learning-based codes. Finally, we systematically analyze the learned codes, establishing connections between LightCodeand PowerBlast, identifying components crucial for performance, and providing interpretation aided by linear regression analysis.

Progress in designing channel codes has been driven by human ingenuity and, fittingly, has been sporadic. Polar codes, developed on the foundation of Arikan’s polarization kernel, represent the latest breakthrough in coding theory and have emerged as the state-of-the-art error-correction code for short-to-medium block length regimes. In an effort to automate the invention of good channel codes, especially in this regime, we explore a novel, non-linear generalization of Polar codes, which we call DeepPolar codes. DeepPolar codes extend the conventional Polar coding framework by utilizing a larger kernel size and parameterizing these kernels and matched decoders through neural networks. Our results demonstrate that these data-driven codes effectively leverage the benefits of a larger kernel size, resulting in enhanced reliability when compared to both existing neural codes and conventional Polar codes.

Tailoring polar code construction for decoding algorithms beyond successive cancellation has remained a topic of significant interest in the field. However, despite the inherent nested structure of polar codes, the use of sequence models in polar code construction is understudied. In this work, we propose using a sequence modeling framework to iteratively construct a polar code for any given length and rate under various channel conditions. Simulations show that polar codes designed via sequential modeling using transformers outperform both 5G-NR sequence and Density Evolution based approaches for both AWGN and Rayleigh fading channels.

In decoding linear block codes, it was shown that noticeable reliability gains can be achieved by introducing learnable parameters to the Belief Propagation (BP) decoder. Despite the success of these methods, there are two key open problems. The first is the lack of interpretation of the learned weights, and the other is the lack of analysis for non-AWGN channels. In this work, we aim to bridge this gap by providing insights into the weights learned and their connection to the structure of the underlying code. We show that the weights are heavily influenced by the distribution of short cycles in the code. We next look at the performance of these decoders in non-AWGN channels, both synthetic and over-the-air channels, and study the complexity vs. performance trade-offs, demonstrating that increasing the number of parameters helps significantly in complex channels. Finally, we show that the decoders with learned weights achieve higher reliability than those with weights optimized analytically under the Gaussian approximation.

In modern communication systems with feedback, there are increasingly more scenarios where the transmitter has much less power than the receiver (e.g., medical implant devices), which we refer to as noise-asymmetric channels. For such channels, the feedback link is of higher quality than the forward link. However, feedback schemes for cellular communications, such as hybrid ARQ, do not fully utilize the high-quality feedback link. To this end, we introduce Compressed Error Hybrid ARQ, a generalization of hybrid ARQ tailored for noise-asymmetric channels; the receiver sends its estimated message to the transmitter, and the transmitter harmoniously switches between hybrid ARQ and compressed error retransmission. We show that our proposed method significantly improves reliability, latency, and spectral efficiency compared to the conventional hybrid ARQ in various practical scenarios where the transmitter is resource-constrained.

Efficient compression of correlated data is essential to minimize communication overload in multi-sensor networks. In such networks, each sensor independently compresses the data and transmits them to a central node. A decoder at the central node decompresses and passes the data to a pre-trained machine learning-based task model to generate the final output. Due to limited communication bandwidth, it is important for the compressor to learn only the features that are relevant to the task. Additionally, the final performance depends heavily on the total available bandwidth. In practice, it is common to encounter varying availability in bandwidth. Since higher bandwidth results in better performance, it is essential for the compressor to dynamically take advantage of the maximum available bandwidth at any instant. In this work, we propose a novel distributed compression framework composed of independent encoders and a joint decoder, which we call neural distributed principal component analysis (NDPCA). NDPCA flexibly compresses data from multiple sources to any available bandwidth with a single model, reducing compute and storage overhead. NDPCA achieves this by learning low-rank task representations and efficiently distributing bandwidth among sensors, thus providing a graceful trade-off between performance and bandwidth. Experiments show that NDPCA improves the success rate of multi-view robotic arm manipulation by 9% and the accuracy of object detection tasks on satellite imagery by 14% compared to an autoencoder with uniform bandwidth allocation.

In this paper, we introduce a neural-augmented decoder for Turbo codes called TINYTURBO . TINYTURBO has complexity comparable to the classical max-log-MAP algorithm but has much better reliability than the max-log-MAP baseline and performs close to the MAP algorithm. We show that TINYTURBO exhibits strong robustness on a variety of practical channels of interest, such as EPA and EVA channels, which are included in the LTE standards. We also show that TINYTURBO strongly generalizes across different rate, blocklengths, and trellises. We verify the reliability and efficiency of TINYTURBO via over-the-air experiments.