Location-based services are increasingly vital to urban digital transformation, with indoor positioning technologies enabling applications such as intelligent transportation and smart logistics. Leveraging the comprehensive indoor coverage of 5G cellular networks, this paper introduces FIVPos, a novel multi-beam fusion indoor positioning system designed for single-base-station scenarios. Unlike conventional approaches, FIVPos relies solely on transmission signals from a single commercial 5G base station, allowing simultaneous extraction of energy and distance information through a single receiving antenna. The proposed system builds on a multi-beam collaborative ranging model that combines carrier phase measurements with Reference Signal Received Power (RSRP). A lightweight stacked IMPos fingerprinting method is then employed to enhance dynamic positioning. To further improve robustness, a particle filter–based fusion framework integrates beam-based ranging with fingerprint-based matching, ensuring accurate and resilient positioning in complex indoor environments. Evaluation conducted in two representative indoor environments shows that FIVPos achieves sub-1.5-meter Root Mean Square Error (RMSE) in dynamic scenarios, while delivering over 33% reduction in Maximum Error (MAXE) compared with conventional fingerprint-only approaches. These results confirm the effectiveness of multi-beam fusion as a practical and scalable solution for high-precision indoor positioning in 5G networks.

With the widespread deployment of the fifth-generation (5G) network indoors, commercial 5G signals are highly attractive in the field of indoor positioning because of their ubiquity. Considering the user equipment (UE) requirements for user privacy protection, low computational resource consumption, and the need for location services in mobile conditions, this study developed a low-cost indoor mobile positioning system based on 5G downlink multi-beam signals, termed IMPos. In particular, this research only uses the multi-beam reference signal received power as data source, which is derived from a single commercially deployed base station (BS) and received by a single receiving antenna. Based on this data source, a machine learning method is first proposed for floor-level recognition. Thereafter, a G2Bi network based on stacked recurrent neural networks is designed to achieve UE mobile self-positioning. To evaluate the performance of IMPos, field tests are carried out in different floor scenarios. Results show that even with just one BS, IMPos achieves a floor-level recognition accuracy exceeding 95% and a mobile positioning root-mean-square error of below 1.5 m in various scenarios.

In this work, we investigate the property of the multi-beam of 5G new radio (NR) signals for indoor localization. Specifically, the 5G NR signals are firstly sampled by a self-developed software-defined receiver, and the multi-beam is extracted via detecting the multiple synchronization signal blocks (SSBs). Secondly, with the assistance of the pilots in the multiple SSBs, the reference signal received power (RSRP) and reference signal received quality (RSRQ) of the multi-beam are calculated. Thirdly, by stacking the RSRP and RSRQ of the multi-beam as the observables, a fingerprint database is constructed. With the aim to efficiently process the fingerprint features and improve the accuracy of indoor localization, a CatBoost-based algorithm is proposed, and the parameters are further optimized by tree-structured parzen estimator (TPE). To verify the effectiveness of the proposed method, indoor field tests are carried out in an office scenario, where real 5G signals are transmitted from a commercial 5G NR base station indoors. The field tests demonstrate that, by taking the advantages of the multi-beam of 5G NR, the localization accuracy can be able to achieve the accuracy of 1.06 m in the metric of root mean squared error (RMSE), even when only one base station is heard indoors. By comparison with the single-beam, the accuracy of multi-beam has improved 48%.

The fifth-generation (5G) networks have been massively deployed in commerce. The new features introduced by 5G networks are beneficial to wireless positioning. In this study, the performance of indoor positioning with commercial 5G new radio (NR) signals is investigated, and the channel state information (CSI) extracted from the downlink synchronization signal block is utilized. Considering the limited 5G NR base station (known as gNodeB) is hearable indoors, the fingerprint method is used, and an indoor positioning system termed iPos-5G is developed. The system consists of four components. First, a module of quality control is applied for CSI preprocessing. Second, an unsupervised deep-autoencoder network is utilized to reconstruct CSI features. Third, by supervised learning, a radial basis function is improved to optimize the probability model for similarity calculations. Finally, an amplitude-phase probability fusion function is proposed for positioning by weighting the coordinates of reference points. To verify the effectiveness of iPos-5G, indoor field tests are carried out in the scenarios of an office and a corridor. The test results show that iPos-5G achieves mean absolute errors of 2.14 and 2.81 m and standard deviation of the errors of 1.07 and 1.66 m, which outperforms the compared CSI fingerprint methods in terms of positioning accuracy and stability.