Recently we have witnessed the active deployment of mega-constellations with hundreds to thousands of low-earth orbit (LEO) satellites, targeting at constructing LEO satellite networks (LSN) to provide ubiquitous Internet services globally. However, while the massive deployment of LEO satellites can improve the network survivability and performance of an LSN, it also involves additional sustainable challenges such as higher deployment cost, risk of satellite conjunction and space debris.In this paper, we investigate an important research problem facing the upcoming satellite Internet: from a network perspective, how many satellites exactly do we need to construct a survivable and performant LSN? To answer this question, we first formulate the survivable and performant LSN design (SPLD) problem, which aims to find the minimum number of needed satellites to construct an LSN that can provide sufficient amount of redundant paths, required link capacity and acceptable latency for traffic carried by the LSN. Second, to efficiently solve the tricky SPLD problem, we propose MegaReduce, a requirement-driven constellation optimization mechanism, which can calculate feasible solutions for SPLD in polynomial time. Finally, we conduct extensive trace-driven simulations to verify MegaReduce’s cost-effectiveness in constructing survivable and performant LSNs on demand, and showcase how MegaReduce can help optimize the incremental deployment and long-term maintenance of future satellite Internet.

Unmanned Aerial Vehicle (UAV) can be used as wireless aerial mobile base station for collecting data from sensors in UAV-based Wireless Sensor Networks (WSNs), which is crucial for providing seamless services and improving the performance in the next generation wireless networks. However, since the UAV are powered by batteries with limited energy capacity, the UAV can not complete data collection tasks of all sensors without energy replenishment when a large number of sensors are deployed over large monitoring areas. To overcome this problem, we study the Real-time Data Collection with Laser-charging UAV (RDCL) problem, where the UAV is utilized to collect data from a specified WSN and is recharged using Laser Beam Directors (LBDs). This problem aims to collect all sensory data from the WSN and transport it to the base station by optimizing the flight trajectory of UAV such that real-time data performance is ensured It has been proven that the RDCL problem is NP-hard. To address this, we initially focus on studying two sub-problems, the Trajectory Optimization of UAV for Data Collection (TODC) problem and the Charging Trajectory Optimization of UAV (CTO) problem, whose objectives are to find the optimal flight plans of UAV in the data collection areas and charging areas, respectively. Then we propose an approximation algorithm to solve each of them with the constant factor. Subsequently, we present an approximation algorithm that utilizes the solutions obtained from TODC and CTO problems to address the RDCL problem. Finally, the proposed algorithm is verified by extensive simulations.