This work investigates a practical reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system, where a subset of RIS elements fail to function properly and reflect incident signals randomly towards unintended directions with attenuation, thereby degrading system performance. To date, no study has addressed such impairments caused by faulty RIS elements in ISAC systems. This work aims to fill the gap. First, to quantify the impact of faulty elements on ISAC performance, we derive the misspecified Cramér-Rao bound (MCRB) for sensing parameter estimation and signal-to-interference-and-noise ratio (SINR) for communication quality. Then, to mitigate the performance loss caused by faulty elements, we jointly design the remaining functional RIS phase shifts and transmit beamforming to minimize the MCRB, subject to the communication SINR and transmit power constraints. The resulting optimization problem is highly non-convex due to the intricate structure of the MCRB expression and constant-modulus constraint imposed on RIS. To address this, we reformulate it into a more tractable form and propose a block coordinate descent (BCD) algorithm that incorporates majorization-minimization (MM), successive convex approximation (SCA), and penalization techniques. Simulation results demonstrate that our proposed approach reduces the performance loss by 21.25% on average compared to the baseline where the presence of faulty elements is ignored. Furthermore, the performance gain becomes more evident as the number of faulty elements increases.

The reflecting antenna elements in most reconfigurable intelligent surfaces (RISs) use semiconductor-based (e.g., positive-intrinsic-negative (PIN) diodes and varactors) phase shifters. Although effective, a drawback of this technology is the high power consumption and cost, which become particularly prohibitive in millimeter-wave (mmWave)/sub-Terahertz range. With the advances in Liquid Crystals (LCs) in microwave engineering, we have observed a new trend in using LC for realizing phase shifter networks of RISs. LC-RISs are expected to significantly reduce the fabrication costs and power consumption. However, the nematic LC molecules are sensitive to temperature variations. Therefore, implementing LC-RIS in geographical regions with varying temperatures requires temperature-resilient designs. The mentioned temperature variation issue becomes more significant at higher temperatures as the phase shifter range reduces in warmer conditions, whereas it expands in cooler ones. In this paper, we study the impact of temperature on the operation of LC-RISs and develop a temperature-resilient phase shift design. Specifically, we formulate a max-min signal-to-interference-plus-noise ratio optimization for a multi-user downlink mmWave network that accounts for the impact of temperature in the LC-RIS phase shifts. The simulation results demonstrate a significant improvement for the considered set of parameters when using our algorithm compared to the baseline approach, which neglects the temperature effects.

Liquid crystal (LC) technology enables low-power and costeffective solutions for implementing the reconfigurable intelligent surface (RIS). However, the phase-shift response of LC-RISs is temperaturedependent, which, if unaddressed, can degrade the performance. This issue is particularly critical in applications such as secure communications, where variations in phase-shift response may lead to significant information leakage. In this paper, we consider secure communication through an LC-RIS and developed a temperature-aware algorithm adapting the RIS phase shifts to thermal conditions. Our simulation results demonstrate that the proposed algorithm significantly improves the secure data rate compared to scenarios where temperature variations are not accounted for.

Reconfigurable Intelligent Surfaces (RISs) are expected to be massively deployed in future beyond-5th generation wireless networks, thanks to their ability to programmatically alter the propagation environment, inherent low-cost and low-maintenance nature. Indeed, they are envisioned to be implemented on the facades of buildings or on moving objects. However, such an innovative characteristic may potentially turn into an involuntary negative behavior that needs to be addressed: an undesired signal scattering. In particular, RIS elements may be prone to experience failures due to lack of proper maintenance or external environmental factors. While the resulting Signal-to-Noise-Ratio (SNR) at the intended User Equipment (UE) may not be significantly degraded, we demonstrate the potential risks in terms of unwanted spreading of the transmit signal to non-intended UEs. In this regard, we consider the problem of mitigating such undesired effectby proposing two simple yet effective algorithms, which are based on maximizing the Signal-to-Leakage-and-Noise-Ratio (SLNR) over a predefined two-dimensional (2D) area and are applicable in the case of perfect channel-state-information (CSI) and partial CSI, respectively. Numerical and full-wave simulations demonstrate the added gains compared to leakage-unaware and reference schemes.

millimeter wave (mmWave) and sub-terahertz (THz) communications have the potential of increasing mobile network throughput drastically. However, the challenging propagation conditions experienced at mmWave and beyond frequencies can potentially limit the range of the wireless link down to a few meters, compared to up to kilometers for sub-6GHz links. Thus, increasing the density of base station deployments is required to achieve sufficient coverage in the Radio Access Network (RAN). To such end, 3rd Generation Partnership Project (3GPP) introduced wireless backhauled base stations with Integrated Access and Backhaul (IAB), a key technology to achieve dense networks while preventing the need for costly fiber deployments. In this paper, we introduce SeBaSi, a system-level simulator for IAB networks, and demonstrate its functionality by simulating IAB deployments in Manhattan, New York City and Padova. Finally, we show how SeBaSi can represent a useful tool for the performance evaluation of self-backhauled cellular networks, thanks to its high level of network abstraction, coupled with its open and customizable design, which allows users to extend it to support novel technologies such as Reconfigurable Intelligent Surfaces (RISs).