In complex scenarios where typical pick-and-place techniques are insufficient, often non-prehensile manipulation can ensure that a robot is able to fulfill its task. However, non-prehensile manipulation is challenging due to its underactuated nature with hybrid-dynamics, where a robot needs to reason about an object’s long-term behavior and contact-switching, while being robust to contact uncertainty. The presence of clutter in the workspace further complicates this task, introducing the need to include more advanced spatial analysis to avoid unwanted collisions. Building upon prior work on reinforcement learning with multimodal categorical exploration for planar pushing, we propose to incorporate location-based attention to enable robust manipulation in cluttered scenes. Unlike previous approaches addressing this obstacle avoiding pushing task, our framework requires no predefined global paths and considers the desired target orientation of the manipulated object. Experimental results in simulation as well as with a real KUKA iiwa robot arm demonstrate that our learned policy manipulates objects successfully while avoiding collisions through complex obstacle configurations, including dynamic obstacles, to reach the desired target pose.

In many contact-rich tasks, force sensing plays an essential role in adapting the motion to the physical properties of the manipulated object. To enable robots to capture the underlying distribution of object properties necessary for generalising learnt manipulation tasks to unseen objects, existing Learning from Demonstration (LfD) approaches require a large number of costly human demonstrations. Our proposed semi-supervised LfD approach decouples the learnt model into a haptic representation encoder and a motion generation decoder. This enables us to pre-train the first using a large amount of unsupervised data, easily accessible, while using few-shot LfD to train the second, leveraging the benefits of learning skills from humans. We validate the approach on the wiping task using sponges with different stiffness and surface friction. Our results demonstrate that pre-training significantly improves the ability of the LfD model to recognise physical properties and generate desired wiping motions for unseen sponges, outperforming the LfD method without pre-training. We validate the motion generated by our semi-supervised LfD model on the physical robot hardware using the KUKA iiwa robot arm. We also validate that the haptic representation encoder, pre-trained in simulation, captures the properties of real objects, explaining its contribution to improving the generalisation of the downstream task. See our accompanying video: https://youtu.be/zP4JvHaCWHk.

From dishwashers to cabinets, humans interact with articulated objects every day, and for a robot to assist in common manipulation tasks, it must learn a representation of articulation. Recent deep learning methods can provide powerful vision-based priors on the affordance of articulated objects from previous, possibly simulated, experiences. In contrast, many other works estimate articulation by observing the object in motion, requiring the robot to already be interacting with the object. In this work, we propose to use the best of both worlds by introducing an online estimation method that merges vision-based affordance predictions from a neural network with interactive kinematic sensing in an analytical model. Our work has the benefit of using vision to predict an articulation model before touching the object, while also being able to update the model quickly from kinematic sensing during the interaction. In this paper, we implement a full system using shared autonomy for robotic opening of articulated objects, in particular objects in which the articulation is not apparent from vision alone. We implemented our system on a real robot and performed several autonomous closed-loop experiments in which the robot had to open a door with unknown joint while estimating the articulation online. Our system achieved an 80% success rate for autonomous opening of unknown articulated objects.

Recognising the characteristics of objects while a robot handles them is crucial for adjusting motions that ensure stable and efficient interactions with containers. Ahead of realising stable and efficient robot motions for handling/transferring the containers, this work aims to recognise the unobservable latent object characteristics. While vision is commonly used for object recognition by robots, it is ineffective for detecting hidden objects. However, recognising objects indirectly using other sensors is a challenging task. To address this challenge, we propose a cross-modal transfer learning approach from vision to haptic-audio. We initially train the model with vision, directly observing the target object. Subsequently, we transfer the latent space learned from vision to a second module, trained only with haptic-audio and motor data. This transfer learning framework facilitates the representation of object characteristics using indirect sensor data, thereby improving recognition accuracy. For evaluating the recognition accuracy of our proposed learning framework we selected shape, position, and orientation as the object characteristics. Finally, we demonstrate online recognition of both trained and untrained objects using the humanoid robot Nextage Open. See our accompanying video here: https://www.youtube.com/watch?v=sOHqPC1uusg

This paper investigates one of the most challenging tasks in dynamic manipulation-catching large-momentum moving objects. Beyond the realm of quasi-static manipulation, dealing with highly dynamic objects can significantly improve the robot's capability of interacting with its surrounding environment. Yet, the inevitable motion mismatch between the fast moving object and the approaching robot will result in large impulsive forces, which lead to the unstable contacts and irreversible damage to both the object and the robot. To address the above problems, we propose an online optimization framework to: 1) estimate and predict the linear and angular motion of the object; 2) search and select the optimal contact locations across every surface of the object to mitigate impact through sequential quadratic programming (SQP); 3) simultaneously optimize the end-effector motion, stiffness, and contact force for both robots using multi-mode trajectory optimization (MMTO); and 4) realise the impact-aware catching motion on the compliant robotic system based on indirect force controller. We validate the impulse distribution, contact selection, and impactaware MMTO algorithms in simulation and demonstrate the benefits of the proposed framework in real-world experiments including catching large-momentum moving objects with welldefined motion, constrained motion and free-flying motion.

This paper presents OpTaS, a task specification Python library for Trajectory Optimization (TO) and Model Predictive Control (MPC) in robotics. Both TO and MPC are increasingly receiving interest in optimal control and in particular handling dynamic environments. While a flurry of software libraries exists to handle such problems, they either provide interfaces that are limited to a specific problem formulation (e.g. TracIK, CHOMP), or are large and statically specify the problem in configuration files (e.g. EXOTica, eTaSL). OpTaS, on the other hand, allows a user to specify custom nonlinear constrained problem formulations in a single Python script allowing the controller parameters to be modified during execution. The library provides interface to several open source and commercial solvers (e.g. IPOPT, SNOPT, KNITRO, SciPy) to facilitate integration with established workflows in robotics. Further benefits of OpTaS are highlighted through a thorough comparison with common libraries. An additional key advantage of OpTaS is the ability to define optimal control tasks in the joint-space, task-space, or indeed simultaneously. The code for OpTaS is easily installed via pip, and the source code with examples can be found at github.com/cmower/optas.

For assisting humans in their daily lives, robots need to perform long-horizon tasks, such as tidying up a room or preparing a meal. One effective strategy for handling a long-horizon task is to break it down into short-horizon subgoals, that the robot can execute sequentially. In this paper, we propose extending a predictive learning model using deep neural networks (DNN) with a Subgoal Proposal Module (SPM), with the goal of making such tasks realizable. We evaluate our proposed model in a case-study of a long-horizon task, consisting of cutting and arranging a pizza. This task requires the robot to consider: (1) the order of the subtasks, (2) multiple subtask selection, (3) coordination of dual-arm, and (4) variations within a subtask. The results confirm that the model is able to generalize motion generation to unseen tools and objects arrangement combinations. Furthermore, it significantly reduces the prediction error of the generated motions compared to without the proposed SPM. Finally, we validate the generated motions on the dual-arm robot Nextage Open. See our accompanying video here: https://youtu.be/3hYS2knRm50

Developing robot controllers capable of achieving dexterous nonprehensile manipulation, such as pushing an object on a table, is challenging. The underactuated and hybrid-dynamics nature of the problem, further complicated by the uncertainty resulting from the frictional interactions, requires sophisticated control behaviors. Reinforcement Learning (RL) is a powerful framework for developing such robot controllers. However, previous RL literature addressing the nonprehensile pushing task achieves low accuracy, non-smooth trajectories, and only simple motions, i.e. without rotation of the manipulated object. We conjecture that previously used unimodal exploration strategies fail to capture the inherent hybrid-dynamics of the task, arising from the different possible contact interaction modes between the robot and the object, such as sticking, sliding, and separation. In this work, we propose a multimodal exploration approach through categorical distributions, which enables us to train planar pushing RL policies for arbitrary starting and target object poses, i.e. positions and orientations, and with improved accuracy. We show that the learned policies are robust to external disturbances and observation noise, and scale to tasks with multiple pushers. Furthermore, we validate the transferability of the learned policies, trained entirely in simulation, to a physical robot hardware using the KUKA iiwa robot arm. See our supplemental video: https://youtu.be/vTdvalmgrk4.

Contact adaptation is an essential capability when manipulating objects. Two key contact modes of non-prehensile manipulation are sticking and sliding. This paper presents a Trajectory Optimization (TO) method formulated as a Mathematical Program with Complementarity Constraints (MPCC), which is able to switch between these two modes. We show that this formulation can be applicable to both planning and Model Predictive Control (MPC) for planar manipulation tasks. We numerically compare: (i) our planner against a mixed integer alternative, showing that the MPCC planner converges faster, scales better with respect to the time horizon (TH), and can handle environments with obstacles; (ii) our controller against a state-of-the-art mixed integer approach, showing that the MPCC controller achieves improved tracking and more consistent computation times. Additionally, we experimentally validate both our planner and controller with the KUKA LWR robot on a range of planar manipulation tasks. See our accompanying video here: https://youtu.be/EkU6YHMhjto.

The transition from free motion to contact is a challenging problem in robotics, in part due to its hybrid nature. Additionally, disregarding the effects of impacts at the motion planning level often results in intractable impulsive contact forces. In this paper, we introduce an impact-aware multi-mode trajectory optimization (TO) method that combines hybrid dynamics and hybrid control in a coherent fashion. A key concept is the incorporation of an explicit contact force transmission model in the TO method. This allows the simultaneous optimization of the contact forces, contact timings, continuous motion trajectories and compliance, while satisfying task constraints. We compare our method against standard compliance control and an impact-agnostic TO method in physical simulations. Further, we experimentally validate the proposed method with a robot manipulator on the task of halting a large-momentum object.

Many robotic tasks require human interaction through teleoperation to achieve high performance. However, in industrial applications these methods often require high levels of concentration and manual dexterity leading to high cognitive loads and dangerous working conditions. Shared autonomy attempts to address these issues by blending human and autonomous reasoning, relieving the burden of precise motor control, tracking, and localization. In this paper we propose an optimization-based representation for shared autonomy in dynamic environments. We ensure real-time tractability by modulating the human input with the information of the changing environment in the same task space, instead of adding it to the optimization cost or constraints. We illustrate the method with two real world applications: grasping objects in a cluttered environment, and a spraying task requiring sprayed linings with greater homogeneity. Finally we use a 7 degree of freedom KUKA LWR arm to simulate the grasping and spraying experiments.