Deterministic communications are essential to meet the stringent delay and jitter requirements of Industrial Internet of Things (IIoT) services. IIoT increasingly demands wide-area wireless mobility to support Autonomous Mobile Robots (AMR) and dynamic workflows. Integrating Time-Sensitive Networking (TSN) with 5G private networks is emerging as a promising approach to fulfill these requirements. In this architecture, 5G provides wireless access for industrial devices, which connect to a TSN backbone that interfaces with the enterprise edge/cloud, where IIoT control and computing systems reside. TSN achieves bounded latency and low jitter using IEEE 802.1Qbv Time-Aware Shaper (TAS), which schedules the network traffic in precise time slots. However, the stochastic delay and jitter inherent in 5G disrupt TSN scheduling, requiring careful tuning of TAS parameters to maintain end-to-end determinism. This paper presents an empirical study evaluating the impact of 5G downlink delay and jitter on TAS scheduling using a testbed with TSN switches and a commercial 5G network. Results show that guaranteeing bounded latency and jitter requires careful setting of TAS transmission window offset between TSN switches based on the measured 5G delay bounded by a high order p-th percentile. Otherwise, excessive offset may cause additional delay or even a complete loss of determinism.

Time synchronization is essential for industrial IoT and Industry 4.0/5.0 applications, but achieving high synchronization accuracy in Time-Sensitive Networking (TSN)-5G networks is challenging due to jitter and asymmetric delays. 3GPP TS 23.501 defines three 5G synchronization modes: time-aware system, boundary clock (BC), and transparent clock (TC), where TC offers a promising solution. However, to the best of our knowledge, there is no empirical evaluation of TC in a TSN5G network. This paper empirically evaluates an 5G end-to-end TC in a TSN-5G network, implemented on commercial TSN switches with a single clock. For TC development, we compute the residence time in 5G and recover the clock domain at the slave node. We deploy a TSN-5G testbed with commercial equipment for synchronization evaluation by modifying the Precision Timing Protocol (PTP) message transmission rates. Experimental results show a peak-to-peak synchronization of 500 ns, meeting the industrial requirement of ≤1 µs, with minimal synchronization offsets for specific PTP message transmission rates.

Deterministic communications are essential for industrial automation, ensuring strict latency requirements and minimal jitter in packet transmission. Modern production lines, specializing in robotics, require higher flexibility and mobility, which drives the integration of Time-Sensitive Networking (TSN) and 5 G networks in Industry 4.0. TSN achieves deterministic communications by using mechanisms such as the IEEE 802.1Qbv Time-Aware Shaper (TAS), which schedules packet transmissions within precise cycles, thereby reducing latency, jitter, and congestion. 5G networks complement TSN by providing wireless mobility and supporting ultra-Reliable LowLatency Communications. However, 5 G channel effects such as fast fading, interference, and network-induced latency and jitter can disrupt TSN traffic, potentially compromising deterministic scheduling and performance. This paper presents an empirical analysis of 5G network latency and jitter on IEEE 802.1Qbv performance in a $\mathbf{5 G}$-TSN network. We evaluate the impact of $\mathbf{5 G}$ integration on TSN’s deterministic scheduling through a testbed combining IEEE 802.1Qbv-enabled switches, TSN translators, and a commercial 5 G system. Our results show that, with proper TAS configuration in the TSN switch aligned with the 5G system, jitter can be mitigated, maintaining deterministic performance.