Integrating deep learning with environmental perception enhances robotic adaptability to complex tasks. However, its “black-box” nature, such as the lack of uncertainty quantification, poses challenges for safety-critical applications, particularly in unstructured and noisy environments. Bayesian neural networks (BNNs) offer uncertainty quantification but are limited by high hardware overhead, restricting real-time implementation on resource-constrained robots. This paper presents a mixedsignal hardware accelerator for BNNs, utilizing probabilistic quantum tunneling in fully depleted silicon-on-insulator (FDSOI) transistors to enable efficient, real-time uncertainty quantification. Device measurements indicate high-quality Gaussian random variable generation, validated through quantile-quantile plot analysis, with a high correlation coefficient ($r=0.997$) at $200 \mathrm{fJ} /$ sample. Leveraging such compact randomness, the parallel architecture achieved $10^{3}-10^{4} \times$ latency reduction at less than $2 \times$ area cost. Finally, in uncertainty-aware visual localization application of autonomous underwater vehicles, the BNN model effectively distinguishes data noise from model uncertainty, yielding significant information gain and enhancing the resampling efficiency by $4.5 \times$ at same accuracy.

To enhance AI robustness of mission-critical biomedical applications, Bayesian Neural Networks (BNNs) are instrumental for their structured approach to AI uncertainty estimation. However, implementing BNNs on edge devices is challenging due to significant resource demands for dynamic model updates and extensive inference sampling. Addressing this, we introduce a novel mixed-signal Compute-in-Memory with Entropy (CIE) hardware architecture that segregates dynamically-generated weights into analog entropy and digital parameters within a compute-in-memory framework, greatly reducing hardware overhead. We conducted thorough evaluations of the CIE architecture, assessing its performance against varying hardware imperfections, such as digital quantization errors, analog distribution imperfections, and device process variations, with a focus on both general and specialized tasks like Ventricular Arrhythmia (VA) detection. Our contributions include (1) a generic BNN acceleration strategy suitable for various CIM techniques and emerging devices, (2) a custom circuit design that improves hardware efficiency by 19.2×-440× compared to existing BNN accelerators, (3) a CIE-based BNN for VA detection enhancing accuracy, reducing uncertainty estimation time and energy/latency to 1.29μJ/1.55ms, and (4) identification of tolerable quantization error and device variation limits for BNNs in uncertainty estimation.

This brief presents an innovative digital current-mode control technique for single-inductor multiple-output (SIMO) buck converters in continuous-conduction mode. Additionally, it first introduces an overcurrent protection (OCP) method for each output channel of the SIMO converter. As a supplement, since previous research could not or could only protect the input, the OCP proposed in this brief makes SIMO more valuable for industrial applications. The proposed approach effectively reduces cross-regulation by distributing currents shared by the inductor among all branches in a reasonable manner. Moreover, the OCP control can detect overloads in any branch and limit the peak current without affecting other branches. Simulation results demonstrate that the cross-regulation between each channel for overcurrent protection is less than 100 mV, even during an overload.