Multi-view 3D detection with bird’s eye view (BEV) is crucial for autonomous driving and robotics, but its robustness in real-world is limited as it struggles to predict accurate depth values. A mainstream solution, cross-modal distillation, transfers depth information from LiDAR to camera models but also unintentionally transfers depth-irrelevant information (e.g. LiDAR density). To mitigate this issue, we propose RayD3D, which transfers crucial depth knowledge along the ray: a line projecting from the camera to true location of an object. It is based on the fundamental imaging principle that predicted location of this object can only vary along this ray, which is finally determined by predicted depth value. Therefore, distilling along the ray enables more effective depth information transfer. More specifically, we design two ray-based distillation modules. Ray-based Contrastive Distillation (RCD) incorporates contrastive learning into distillation by sampling along the ray to learn how LiDAR accurately locates objects. Ray-based Weighted Distillation (RWD) adaptively adjusts distillation weight based on the ray to minimize the interference of depth-irrelevant information in LiDAR. For validation, we widely apply RayD3D into three representative types of BEV-based models, including BEVDet, BEVDepth4D, and BEVFormer. Our method is trained on clean NuScenes, and tested on both clean NuScenes and RoboBEV with a variety types of data corruptions. Our method significantly improves the robustness of all the three base models in all scenarios without increasing inference costs, and achieves the best when compared to recently released multi-view and distillation models.

Multi-modal 3D object detection with bird’s eye view (BEV) has achieved desired advances on benchmarks. Nonetheless, the accuracy may drop significantly in the real world due to data corruption such as sensor configurations for LiDAR and scene conditions for camera. One design bottleneck of previous models resides in the tightly coupling of multi-modal BEV features during fusion, which may degrade the overall system performance if one modality or both is corrupted. To mitigate, we propose a Multi-Modal Decouple and Recouple Network for robust 3D object detection under data corruption. Different modalities commonly share some high-level invariant features. We observe that these invariant features across modalities do not always fail simultaneously, because different types of data corruption affect each modality in distinct ways. These invariant features can be recovered across modalities for robust fusion under data corruption. To this end, we explicitly decouple Camera/LiDAR BEV features into modality-invariant and modality-specific parts. It allows invariant features to compensate each other while mitigates the negative impact of a corrupted modality on the other. We then recouple these features into three experts to handle different types of data corruption, respectively, i.e., LiDAR, camera, and both. For each expert, we use modality-invariant features as robust information, while modality-specific features serve as a complement. Finally, we adaptively fuse the three experts to exact robust features for 3D object detection. For validation, we collect a benchmark with a large quantity of data corruption for LiDAR, camera, and both based on nuScenes. Our model is trained on clean nuScenes and tested on all types of data corruption. Our model consistently achieves the best accuracy on both corrupted and clean data compared to recent models.