A Hi-Fi audio codec with an improved adaptive transform coding (ATC) algorithm is presented using digital signal processors (DSPs). An audio signal with a 20 kHz bandwidth sampled at 48 kHz is coded at a rate of 128 kb/s. The algorithm utilizes adaptive block size selection, which is effective for preecho suppression. A modified discrete cosine transform (MDCT) with a simple window set is employed to reduce block boundary noise without decreasing the performance of transform coding. In addition, a fast MDCT calculation algorithm, based on a fast Fourier transform, is adopted. Weighted bit allocation is employed to quantize the transformed coefficients. The codec was realized by a multiprocessor system composed of newly developed DSP boards. Subjective tests with the codec show that the coding quality is comparable to that of compact disc signals.>

A coding technique is presented for high-quality audio signals based on adaptive transform coding (ATC). Adaptive block size selection by the proposed algorithm ensures an appropriate block size resulting in improved SNR (signal-to-noise ratio) for a wide variety of source signals. A feedback approach, based on SNR, and a feedforward approach, based on interblock differences in input time-domain samples, to adaptive block size assignment are proposed and evaluated. Computer simulation results show that average segmental SNR by the feedback approach is improved by as much as 4.8 dB over the conventional fixed-block-size ATC. The feedforward approach is realized with much-simplified hardware; nevertheless, its SNR degradation from that by the feedback approach is 1.6 dB, even in the worst case. Both approaches are successful in pre-echo suppression to a satisfactory level. Time-domain aliasing cancellation has the potential to increase the superiority of the new algorithm.>