Yun C. Chung

Demonstration venue · read-only. Every page can be browsed; the buttons that would change it are switched off. Create an account to run TaxoReview on your own data. A simulation from public publication records: the people listed were not invited and did not agree to review.

? Tutorial for this page

Demo Data from VLDB 2026 / reviewers in the wild / expert

dblp:56/3159 · DBLP profile ↗

← Back

8ranked-venue papers

1as first author

0since 2021 · last 2005

—ORCID · none

Domains — the database's venue-derived domains; a paper can count in several

Graphics, computer vision, multimedia, augmented reality and games · 8 · 1 first-authorTheory of computation · 1

Expertise — from the expertise taxonomy: the topics of the expert's papers under the CCF categories. A weight counts papers with recency: 1 for a paper about the topic, 0.3 when the topic is its context, halved every five years.

Computer graphics and multimedia

6 papers

Geometric modeling and processing · 45% Computational fabrication · 36% Computer animation and physical simulation · 19%

Topics — the 6 heaviest of 7, each with the papers that count most for it

Topic	Weight	Papers	Last	Evidence papers
Computational fabrication tool path generation	0.1	2	2003	Contour-parallel offset machining without tool-retractions · Comput. Aided Des. 2003 Tool-path generation from measured data · Comput. Aided Des. 2003
Computer animation and physical simulation cutting simulation	0.1	1	2005	Hybrid cutting simulation via discrete vector model · Comput. Aided Des. 2005
Geometric modeling and processing › computer-aided design › computer-aided geometric design › offsetting offset computation	0.0	1	2003	Mitered offset for profile machining · Comput. Aided Des. 2003
Geometric modeling and processing › surface reconstruction topology reconstruction	0.0	1	2003	A tolerant approach to reconstruct topology from unorganized trimmed surfaces · Comput. Aided Des. 2003
Geometric modeling and processing › computer-aided design › computer-aided geometric design trimmed surface	0.0	1	2003	A tolerant approach to reconstruct topology from unorganized trimmed surfaces · Comput. Aided Des. 2003
Computational fabrication › numerical control NC verification	0.0	1	1998	Modeling the surface swept by a generalized cutter for NC verification · Comput. Aided Des. 1998

Methods — techniques the papers use, named apart from their topics

tolerant reconstruction · 0.0reverse engineering · 0.0profile machining · 0.0offset machining · 0.0

Year	Publication	Venue	Position
2005	Hybrid cutting simulation via discrete vector model Jung W. Park, Yang H. Shin, Yun C. Chung	Comput. Aided Des.	3
2004	Efficient Topology Construction from Triangle Soup abstract Triangular mesh is one of the most popular shape representations in computer graphics and the CAD/CAM/ CAE area. In this paper we present a memory and time efficient topology construction algorithm from triangle soup, which is a set of triangles without connectivity information. The proposed algorithm consists of the following steps: (1) vertex merging, (2) internal edge linking, (3) multi-disk vertex splitting, and (4) boundary gap stitching. Typical triangle soup comes in the form of an STL file, and topology construction work encounters non-manifold cases for various causes, which should be converted to 2-manifold models for many downstream processes such as rapid prototyping and tool path generation. The proposed algorithm uses a light-weight vertex-based data structure (adapted from a 'corner table' structure), and does not need to construct a full non-manifold topology information. The efficiency of the proposed algorithm is shown by empirical tests on practical examples. Hayong Shin, Joon C. Park, Byoung Kyu Choi, Yun C. Chung, Siyoul Rhee	GMP	4
2003	Tool-path generation from measured data Sang C. Park, Yun C. Chung	Comput. Aided Des.	2
2003	Mitered offset for profile machining Sang C. Park, Yun C. Chung	Comput. Aided Des.	2
2003	A tolerant approach to reconstruct topology from unorganized trimmed surfaces Joon C. Park, Yun C. Chung	Comput. Aided Des.	2
2003	Contour-parallel offset machining without tool-retractions Sang C. Park, Yun C. Chung, Byoung Kyu Choi	Comput. Aided Des.	2
2003	An integrated CAPP/CAM system for stamping die pattern machining Hayong Shin, Gustav J. Olling, Yun C. Chung, Bo Hyoung Kim, Su K. Cho	Comput. Aided Des.	3
1998	Modeling the surface swept by a generalized cutter for NC verification Yun C. Chung, Jung W. Park, Hayong Shin, Byoung Kyu Choi	Comput. Aided Des.	1