This paper presents a novel design and experimental investigation for a self-propelled capsule robot that can be used for painless colonoscopy during a retrograde progression from the patient's rectum. The steerable robot is driven forward and backward via its internal vibration and impact with orientation control by using an electromagnetic actuator. The actuator contains four sets of coils and a shaft made by permanent magnet. The shaft can be excited linearly in a controllable and tilted angle, so guide the progression orientation of the robot. Two control strategies are studied in this work and compared via simulation and experiment. Extensive results are presented to demonstrate the progression efficiency of the robot and its potential for robotic colonoscopy.

This paper proposes, for the first time, an automated energy harvester design flow which is based on a single HDL software platform that can be used to model, simulate, configure and optimise energy harvester systems. A demonstrator prototype incorporating an electromagnetic mechanical-vibration-based micro-generator and a limited number of library models has been developed and a design case study has been carried out. Experimental measurements have validated the simulation results which show that the outcome from the design flow can improve the energy harvesting efficiency by 75%.