Forest fires in Canada’s boreal forest can cause a great deal of concern for populations, environment and infrastructures. One of the tools developed to predict potential fire activity related to these events is the Canadian Fire Weather Index System (FWICAN). This study aims to analyse the potential of Soil Moisture and Ocean Salinity (SMOS) satellite products (Soil Moisture (SM), Vegetation Optical Depth (VOD) and Root Zone Soil Moisture (RZSM)) to provide additional information on pre-fire soil and vegetion conditions for forest fire danger rating system. Using Random Forest algorithm, we show that adding SMOS data to the FWICANsystem indices slightly increases the accuracy of the predictions of potential fire activity. The RZSM from SMOS data was the variable that best improved the model performance, whereas the VOD provided no additional information. In the aim to evaluate the method for regions with limited in situ meteorological data, we used FWI system indices calculated from ERA5 available over the globe (FWIERA5). Taking into account FWIERA5, SMOS data allow to improve substantially the ability to predict forest fire.

A physics-based microwave emission model for layered vegetation (MEMLV) is developed to simulate the vegetation optical depth (VOD) and scattering albedo of coniferous forests from P- to Ka-band (0.4 GHz–37 GHz). This study aims to use physics-based forward modeling to guide and support multifrequency VOD retrieval. The MEMLV consists of three major components: 1) the single-layer discrete scatter model (SL-DSM) that calculates the VOD and single scattering albedo of a single layer; 2) a new Tree Structure Model (TSM) that represents forests by stratified multilayer media; and 3) the Two-Stream microwave emission model (2S-MEM) that combines SL-DSM and TSM to calculate the brightness temperature of forests and their corresponding effective VOD,$\tau _{\text {eff}}$, and effective scattering albedo,$\omega _{\text {eff}}$. Simulation of an exemplary coniferous forest shows that$\tau _{\text {eff}}$increases as frequency increases until reaching saturation at K-band. Meanwhile,$\omega _{\text {eff}}$increases rapidly at low frequencies until reaching a peak at S-band, then decreases until reaching X-band, and finally increases monotonically as frequency increases. Notably,$\omega _{\text {eff}}$is negligible at P-band for most cases. Sensitivity analyses demonstrate the saturation of$\tau _{\text {eff}}$when canopy height is substantial, and the decreasing trend of$\omega _{\text {eff}}$as canopy height or the areal fraction of canopy gap increases. The MEMLV has the potential to improve the parameterization of retrieval algorithms and to enhance the understanding of the retrieved VOD over a wide frequency range.

Recent applications of passive L-band observations from space are summarized for ocean, land surface and cryosphere applications. The main limitation of the measurements performed by the current generation of sensors is the spatial resolution. The need of a mission ensuring the continuation of L-band measurements from space with high spatial resolution (10-15 km) is discussed.

This study focuses on modelling the scattering albedo of a vegetation canopy, which can be used in vegetation opacity depth (VOD) retrieval, over a wide frequency range (1-37 GHz). In this study, boreal tree canopy has been used as an example. A discrete scatter model has been implemented to calculate single scattering albedo and vegetation opacity depth (VOD) of a single-layer canopy consisting of a variety type of scatterers. For a more realistic parameterization, a novel tree structure model has been developed to quantify the vertical structure of a forest. For the first time, we combined the discrete scatter model with the multi-layer 2Stream model to calculate the brightness temperature of the tree canopy based on its vertical structure. This research provides a comprehensive forward modelling tool that can be parameterized with different vegetation types (e.g. tree, crops and grass) and parameters (e.g. height, density, soil condition and vertical water content distribution). The model can be used in retrieval algorithm to find effective scattering albedo and VOD over a wide range of frequencies.

The European Space Agency (ESA) launched the SMOS (Soil Moisture Ocean Salinity) mission in 2009; currently, multiple global soil moisture (SM) products are based on the measurements of its L-band (1.4 GHz) radiometer. We compared four SMOS products with each other: Level 2, Level 3, IC (INRA-CESBIO), and Near Real Time products. The comparisons focused on core validation sites (CVS), whose spatial representativeness errors allow the estimation of the SM product performance for bias-insensitive metrics (unbiased root mean square error (ubRMSE) and correlation (R), and anomaly R) with negligible uncertainty and for bias-sensitive metrics (mean difference (MD) and root mean square difference or RMSD) with acceptable uncertainty. When the products were compared with CVS independently, the results showed that the ubRMSE, R, and anomaly R of the IC product were better than those of the other products, while the MD was larger. However, the differences between the performances were smaller when the products were assessed using only the data points when each product had a valid retrieval. This indicates that the algorithms have similar performance and that data screening and quality flagging of the retrievals markedly affects the performance. The NASA Soil Moisture Active Passive (SMAP) mission produces a similar SM product as SMOS using an L-band radiometer. The closeness of the ubRMSE, R, and anomaly R performance of the IC product and the SMAP product (0.039 m3/m3vs. 0.041 m3/m3, 0.80 vs. 0.81, and 0.75 vs. 0.75) demonstrate that the SMOS and SMAP radiometers can achieve similar SM sensitivity.

Remote sensing observations of variables related to vegetation at microwave and optical/infrared wavelengths are presented over three regions in Europe in the Iberian peninsula, northern Finland and central Europe. They include the instrumented sites of Las Majadas, Sodankyla and Reusel. The final goal is to better constrain land carbon cycle models using the complementarities of vegetation optical depth derived at different frequencies from active and passive instruments (related to vegetation water content and biomass) as well as optical data of the fraction of absorbed photosynthetically active radiation or solar induced fluorescence, closely linked to photosynthesis. The first results confirm this complementarity. For instance, time series of different variables exhibit positive correlations in some areas and negative correlations in other areas.

International audience

Above ground biomass (AGB) maps were estimated directly from microwave brightness temperatures (TB) using a machine learning approach. The accuracy of AGB retrievals from Artificial Neural Networks (ANN) is explored using both a multi-angular (using TBs products from the SMOS mission) and multi-frequency approach (using multi frequency measurements from the AMSR-E mission), an additional ANN inversion including optical indexes (MODIS-NDVI) is also discussed. Higher incidence angles have been shown to provide more information during the inversion process for AGB estimates than lower angles. Retrievals from the multi-angular lower-frequency inversion (SMOS - 1.4GHz) performed better than any individual higher-frequency retrievals. The addition of multi-frequency TBs (AMSR-E) to lower-frequency multi-angular TBs improves the performance of ANN models (from$\mathrm{R}^{2}\approx 0.94$to 0.96). Adding MODIS-NDVI to the inversion process improves the performance in an additional ~0.05%.

Vegetation optical depth (VOD) is a remotely sensed indicator characterizing the opacity of the vegetation layer. This study focuses on the behaviour of L-band VOD (L-VOD) retrieval algorithm over seasonally inundated areas, as previous observations have shown an unexpected decline in VOD during floods. The signal emitted by a mixed scene composed of soil and standing water was simulated, leading to an overestimation of the retrieved soil moisture (SM) and an underestimation of the retrieved L- VOD, typically by ~ 1 0% over flooded forests and up to 100% over flooded grasslands. We evaluated the induced underestimation of aboveground biomass (AGB) by 15/20 Mg ha-1 in the largest seasonal wetlands, which can represent more than 50% of the actual AGB of the savanna wetland, and up to higher values during exceptional years. Surface water seasonality needs to be taken into account in passive microwave retrieval algorithms to better estimate the global biomass.

The effects of dry and fresh matter on microwave remote sensing data represent a great challenge, for which vegetation permittivity models are essential. To develop this model, in situ permittivity sensors are needed. There are few commercial equipment dedicated to these in situ measurements and none of them are developed in order to leave the instrument on site for automatic measurements with specific constraints such as communication, wide frequency band, non-invasive measurements and low price. We developed an instrument addressing these challenges. In this article, we present the first collected measurements and the computed permittivity data.

Monitoring properties of soil from microwave remote sensing is a very effective tool. In this context, the knowledge of soil permittivity values is important in order to guarantee the accuracy of the monitoring. Previous studies have showed the impact of temperature and moisture gradients in the top soil layer permittivity profile on remote sensing monitoring of soil. To increase our knowledge of these phenomena, we developed a new low cost equipment for continuous in-situ measurements of microwave [100 MHz-3GHz] permittivity soil profiles.

The Soil Moisture and Ocean Salinity (SMOS) satellite is performing systematic L-band observations since 2009, allowing a large number of science and operational applications. Several recent studies have shown the need of the continuity of L-band observations, in particular with an increased angular resolution. In this contribution, two instrumental concepts are presented to reach native resolutions of 5–10 km. In addition, using airborne data, it is also shown that the accuracy of downscaling coarser resolution L-band data to 5–10 km using a high resolution auxiliary data set, is significantly lower than that of native high resolution observations.

Launched in 2009, the SMOS satellite provides measurement of Soil Moisture (SM) and Vegetation Optical Depth (VOD) at L-band over land at high temporal resolution. L-VOD is known for being a good proxy for biomass, and 10 years of measurements are now available to analyze the behaviour of biomass over the whole world. Here, we investigate the links between L- VOD and SM seasonality, together with other vegetation and climatic variables (LAI, precipitation, temperature, and insolation). We also present time series of climatic variables for specific areas, showing remarkable trends of the L- VOD over the 10 year period (2010-2019), linked to climate change.

The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) has been providing the longest consistent data record of passive L-band (1.4 GHz) observations for more than ten years. SMOS, as well as the NASA missions SMAP and Aquarius have demonstrated the interest of L-band observations for land, ocean and cryosphere studies. The continuity of L-band observations must be assured taking into account that the spatial resolution (~ 40 km) of SMOS and SMAP is too coarse for some applications. Disaggregation strategies can be implemented but using airborne data, we show that the quality of the downscaled data cannot match that of an instrument with higher native resolution. The goal of the SMOS-HR (High Resolution) mission is to ensure the continuity of L-band observations while increasing the native resolution to 10 km. SMOS-HR will carry an array of ~ 230 antennas to perform aperture synthesis. The antenna distribution has been optimized to reduce the aliasing in the reconstructed images and SMOS-HR will incorporate advanced on-board Radio Frequency Interferences (RFI) mitigation techniques.

The vegetation optical depth measured at L-Band (LVOD) by the SMOS satellite provides a high temporal resolution information of the vegetation water content that can be linked to the total above ground biomass (AGB). Nevertheless, its coarse spatial resolution (~40 km) can be limiting for a number of applications. This study is devoted to the downscaling of the SMOS LVOD using high spatial resolution L-Band backscatter data from ALOS1 synthetic aperture radar. The goal is to improve the spatial resolution of the LVOD to estimate AGB at 1 km.

The Soil Moisture and Ocean Salinity mission has been collecting data for over 9 years. The whole data currently being reprocessed (Version 721 for levels 1 and 2 and version 4 for level 3 CATDS) an used to see trends and finalise potential applications. This ESA led mission for Earth Observation is dedicated to provide soil moisture over continental surfaces (with an accuracy goal of 0.04 m3/m3), vegetation water content over land, and ocean salinity. After 9 years it seems important to start using data for having a look at anomalies and see how they can relate to large scale events. Also we now have access the Soil Moisture Active and Passive (SMAP) mission and there are obvious synergisms to infer.

Neural networks were used to estimate the ability of different sets of predictors to capture the variability of above ground biomass (AGB). SMOS brightness temperatures (TBs) for only two incidence angles capture 85% of the AGB variance. Adding soil moisture or L-band vegetation optical depth (L-VOD) increase the ability to capture the AGB variance to 90 % and 92 %, respectively. With respect to using only TBs, L-VOD improves the AGB estimation in regions of low vegetation.

The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) satellite has provided, for the first time, systematic passive L-band (1.4 GHz) measurements from space. This new data set, with a spatial resolution of ~40 km, has allowed a number of outstanding results over land (soil moisture, vegetation properties, frozen soils, ...), ocean (salinity, meso-scale phenomena, river plumes, high winds, ...) and cryosphere. SMOS, together with the NASA missions SMAP and Aquarius, have demonstrated the interest of the continuity of L-band observations. However, higher spatial resolution (1-10 km) is needed for applications related to water resources management and food security, for instance. Over the ocean as well as in coastal areas, higher resolution will bring the possibility to study in detail meso-scale processes and salinity (and density) variations closer to the coast. Over ice, higher spatial resolution will allow to monitor melting events in the coastal regions of Antarctica, for instance. In order to ensure the continuity of Earth observations in the L-band, while improving the resolution of the current generation of radiometers, new mission concepts are needed. We present the SMOS-HR (High-Resolution) project, which is currently in Phase 0 at CNES (Centre National d'Etudes Spatiales).

SMOS is a space mission led by the European Space Agency and designed to provide global maps of Soil Moisture and Ocean salinity, two important geophysical parameters for understanding the water cycle variations and climate change. The SMOS payload is a 2-D interferometer operating at L-band that consists of 69 elementary antennas located along a Y-shaped structure. Important spatial biases persist in the retrieved brightness temperature (BT) images mainly due to the phenomenon of aliasing inside the field of view of SMOS but also due to the Gibbs oscillations near land/ocean transitions. To minimize these biases, a differential image reconstruction algorithm is used in the operational processor that reduces the contrast of the image to be retrieved. To do that, the contribution of a constant artificial temperature map is removed from the measurements prior to reconstruction and then added back after the reconstruction. In this paper, we show that strong residual biases are still present in the retrieved images. To reduce them, we propose to improve the bias correction algorithm by using a more realistic artificial temperature scene based on separating the land and ocean regions and assigning a constant temperature over land and a Fresnel BT model over the ocean. The artificial scene is also improved by means of representing each pixel by its water fraction percentage to smooth the land/ocean transitions. The improved algorithm is validated over the ocean by comparing the retrieved temperatures to a forward geophysical model but also over land by comparing the retrieved soil moisture toin situmeasurements.

Soil moisture retrieval from microwave remote sensing brightness temperatures is in continuous development. In this study, the most recent and latest microwave remote sensing soil moisture products were evaluated against ground-based measurements. We compared, for the first time, the latest versions of SMOS (L2V650 and SMOS-IC V105), SMAP (L3V4), and CCI (V03.2) soil moisture products with respect to ground-based measurements obtained from ISMN (International Soil Moisture Network). Time series were plotted over some sites and it was found that all these products capture well the temporal dynamics over all the sites used in this study. However, CCI was wetter than the in situ measurements over Niger and both SMOS products (IC and L2) and SMAP were drier than the in situ observations over Biebrza site in Poland.

Tropical aboveground carbon changes during 2010–2016 were estimated by a newly developed vegetation optical depth (VOD) product retrieved from the low-frequency L-band (1.4 GHz) passive microwave observations from the Soil Moisture and Ocean salinity (SMOS) satellite. The aboveground carbon changes estimated by VOD in the tropical region during 2010–2016 indicate the tropical region acts as a net carbon source of 111 Tg C yr-1 during 2010–2016. The declines in tropical aboveground carbon were found mainly in eastern America, African drylands and Indonesia.

The ongoing ESA funded `SMOS + Vegetation' project combines a retrieval component that aims at further improving the SMOS VOD product with an assimilation component that aims at demonstrating the added value of this product in constraining simulated land surface fluxes of carbon dioxide. This contribution focuses on the project's modelling and assimilation component. We describe the construction of dedicated observation operators that link the state of the terrestrial biosphere model to simulated VOD and surface layer soil moisture. We present our carbon assimilation system around a terrestrial biosphere model and demonstrate its operation through simultaneous assimilation of the SMOS VOD product over seven sites covering a range of plant functional types.

In Antarctica, the coastal and ice-shelves areas are affected by snowmelt during the austral summer. The length and extend of this melting period are key parameters in the study of climate and its interannual variations in these regions. Melting events have a significant impact on the microwave emissivity of the surface. Thus, satellite microwave observations can be used in order to provide useful information over the whole Antarctic coast and ice-shelves. Several studies exploited the 19 and 37 GHz long time series to retrieve snowmelt events. In this study, these algorithms previously developed have been used to detect melt from the Soil Moisture and Ocean Salinity (SMOS) satellite observations at 1.4 GHz. Snowmelt dataset was obtained from April 2010 and March 2017 with SMOS observations. Finally, the potential of combined low and high frequencies to provide a synergetic description of surface melting events in Antarctica have been highlighted.

Earth's cold regions are key elements of the planet's climate system: they have strong feedbacks with global change and they have a direct impact on human activities. Despite their importance, at present they are not adequately monitored by state-of-the-art instruments. In order to fill this gap, a dedicated spaceborne mission called Cryorad has been proposed in the framework of the ESA Earth Explorer 10 call. The mission would comprise a 0.4-2 GHz nadir-looking radiometer installed on a polar-orbit satellite. Scientific and technical studies are underway, as well as experimental campaigns in Greenland and Antarctica.

The vegetation optical depth (VOD) measured at microwave frequencies is related to the vegetation water content and provides information complementary to visible/infra-red vegetation indices. This study is devoted to the characterisation of a new L-Band (1.4 GHz) VOD dataset (SMOS-IC L-VOD) obtained from the SMOS (Soil Moisture and Ocean Salinity) satellite. SMOS IC L-VOD is evaluated through a comparison with several vegetation-related quantities such as tree height and above ground biomass (AGB) for different land cover types. SMOS L-VOD shows monotonic relationships with respect to the variables extracted from these different datasets without signs of saturation at high values. The relationships between L-VOD and AGB were also compared to those obtained using the Normalized Difference Vegetation Index (NDVI) and K/X/C-VOD (VOD measured at 19, 10.7, and 6.9 GHz). In contrast to NDVI and K/X/C-VOD, L-VOD shows a relationship to AGB that is closer to a linear one without significant signs of saturation. SMOS L-VOD is a very promising dataset for large scale monitoring of biomass, at coarse scale spatial resolution (~ 40 km), but with high temporal resolution and with an improved sensitivity with respect to higher-frequency VOD data.

In 2017, the new SMOS-IC retrieval product of soil moisture (SM) and L-band Vegetation Optical depth (L-VOD) was developed. This product relies on a two-parameter inversion of the L-MEB model (L-band Microwave Emission of the Biosphere) which requires little ancillary information and was found to be accurate, making it very well-suited for application in agriculture, hydrology, climate and vegetation monitoring. In this communication we present recent improvements in the SMOS-IC retrieval algorithm and recent applications using the soil moisture or VOD retrievals from the SMOS-IC data set. SMOS-IC SM is available at the French CATDS center.

In this study, we evaluated a new SMOS (Soil Moisture and Ocean Salinity) soil moisture (SM) product, developed by the collaboration of INRA (Institut National de la Recherche Agronomique) and CESBIO (Centre d'Etudes Spatiales de la BIOsphère), against the operational SMOS level 3 SM product (SMOSL3). This new product (hereinafter referred to as SMOS-INRA-CESBIO, i.e. SMOSIC in short) differs from SMOSL3 three ways: (i) the SMOSIC algorithm considers the pixel as homogeneous and does not take into account the heterogeneity of the pixel; (ii) uses a new calibration of the effective scattering albedo and soil roughness parameters; (iii) no time correlation is applied on the optical depth. The evaluation was done over North America using the (European Center for Medium range Weather Forecasting) ECMWF SM simulation as a reference, using data for 2011. A better performance of the SMOSIC SM product with respect to ECMWF was found: (i) SMOSIC had higher correlation coefficients (temporal dynamics) and lower unbiased RMSD (absolute values) values with ECMWF over most of the study area and (ii) the spatial patterns of the SMOSIC temporal mean SM maps were in a better agreement with ECMWF.

This study presents a new SMOS (Soil Moisture and Ocean Salinity) soil moisture (SM) product based on a different scattering albedo and soil roughness parameterization: the SMOS-IC (SMOS INRA-CESBIO) data set. In this study, several parameterizations of the vegetation and soil roughness parameters (ω, HRand NRP, P = H, V) were tested and the retrieved SM was compared against in situ observations obtained from the International Soil Moisture Network (ISMN). Firstly, values of ω = 0.10, HR= 0.4 and NRP= −1 (P = H, V) were found globally. Secondly, a calibration of these parameters was obtained for the different land cover categories of the International Geosphere-Biosphere Programme (IGBP) scheme. Depending on the IGBP land cover class, values of ω and HRvaried, respectively, in the ranges 0.08–0.12 and 0.1–0.5. The IGBP-based calibration is currently used in the SMOS-IC product algorithm. Using as reference the ISMN sites, a better performance of the SMOS-IC product over the operational SMOSL3 (SMOS level 3) SM product was found: R = 0.62, bias = −0.019 m3/m3, ubRMSE = 0.061 m3/m3 for SMOS-IC; against R = 0.54, bias = −0.037 m3/m3 and ubRMSE = 0.069 m3/m3 for SMOSL3.

The Soil Moisture and Ocean Salinity mission has been collecting data for over 7 years. The whole data set has been reprocessed (Version 620 for levels 1 and 2 and version 3 for level 3 CATDS) an used to see trends and finalise potential applications. This ESA led mission for Earth Observation is dedicated to provide soil moisture over continental surfaces (with an accuracy goal of 0.04 m3/m3), vegetation water content over land, and ocean salinity. After 7 years it seems important to start using data for having a look at anomalies and see how they can relate to large scale events. Also we now have access the Soil Moisture Active and Passive (SMAP) mission and there are obvious synergisms to infer.

This letter aims to estimate the effective scattering albedo ($\omega _{p}$) over the tropical forests using L-band (1.4 GHz) microwave remote sensing. It is carried out using Soil Moisture and Ocean Salinity (SMOS) mission data over five years (2011–2015). We find similar values of$\omega _{p}$computed over the Congo and Amazon forests. The$\omega _{p }$values depend slightly on the polarization. The values of$\omega _{p }$at H-polarization and at 52° ± 5° (40° ± 5°) of incidence angle are within the range 0.064 – 0.069 ± 0.01 (0.061 – 0.067 ± 0.012). At V-polarization, the values of$\omega _{p }$are slightly lower (0.060 – 0.061 ± 0.013 at 52° ± 5° of incidence angle and 0.052 – 0.055 ± 0.013 at 40° ± 5° of incidence angle). These findings should contribute to a better calibration of the value of$\omega _{p }$over the tropical forests in both the SMOS and SM active and passive retrieval algorithms, leading to increase the SM retrieval accuracy over heterogeneous pixels.

In this study, we used a multilinear regression approach to retrieve surface soil moisture from NASA's Soil Moisture Active Passive (SMAP) satellite data to create a global dataset of surface soil moisture which is consistent with ESA's Soil Moisture and Ocean Salinity (SMOS) satellite retrieved surface soil moisture. This was achieved by calibrating coefficients of the regression model using SMOS soil moisture and horizontal and vertical brightness temperatures (TB), over the 2013 — 2014 period. Next, this model was applied to recent SMAP TB data from 31/03/2015–08/09/2015. The retrieved surface soil moisture from SMAP (referred here to as SMAP-reg) was compared to the operational SMAP L3 surface soil moisture retrieved using the single channel algorithm. Both exhibit comparable temporal dynamics with a good agreement of correlation (correlation coefficient R mostly > 0.8) between the SMAP-reg and the operational SMAP L3 surface soil moisture products.

This study focuses on the calibration of the effective scattering albedo (ω) of vegetation in the soil moisture (SM) retrieval at L-Band. Currently, in the SMOS Level 2 and 3 algorithms, the value of ω is set to 0 for low vegetation and ∼ 0.06 – 0.08 for forests. Different parameterizations of vegetation (in terms of ω values) were tested in this study. The possibility of combining soil roughness and vegetation contributions as a single parameter (“combined” method) leads to an important simplification in the algorithm and was also evaluated here. Following these assumptions, retrieved values of SMOS SM were compared with SM data measured over many in situ sites worldwide from the International Soil Moisture Network. These validation sites were classified using the International Geosphere-Biosphere Programme (IGBP) classification scheme. In situ SM measurements and SM retrievals were compared, and statistical scores were computed. The optimum albedo configuration was then found for each class of the IGBP landcover classification. Preliminary results yield values of albedo between 0.07 to 0.12 under the assumption of homogeneous pixels.

The Soil Moisture and Ocean Salinity mission has been collecting data for 6 years. The whole data set has just been reprocessed (Version 620 for levels 1 and 2 and version 3 for level 3 CATDS). This ESA led mission for Earth Observation is dedicated to provide soil moisture over continental surfaces (with an accuracy goal of 0.04 m3/m3), vegetation water content over land, and ocean salinity. After 6 years it seems important to start using data for having a look at anomalies and see how they can relate to large scale events.

Soil Moisture and Ocean Salinity (SMOS) satellite has been providing surface soil moisture (SSM) and ocean salinity (OS) retrievals at L-band for five years (2010-2014). During these five years, the SSM retrieval algorithm i.e. the L-MEB (L-Band Microwave Emission of the Biosphere [1] model has been progressively improved and hence results in different versions of the SMOS SSM products. This study aims at evaluating the last improvement in the SSM products of the most recent SMOS level 3 (SMOSL3) reprocessing (SMOSL3_2.72) vs. an earlier version (SMOSL3_246). Correlation, bias, Root Mean Square Difference (RMSD) and unbiased RMSD (unbRMSD) were used as performance criteria in this study using the ECMWF SM-DAS-2 product as a reference. Results show that the SMOS SSM estimates have been improved: (i) SMOSL3_272 was closer to SM-DAS-2 over most of the globe-with the exception of arid regions-in terms of unbRMSD (ii) SMOSL3_272 was closer to SM-DAS-2 over Spain, Brazil, parts of Sahel, high latitude and equator regions but comparable with SMOSL3_246 over most of the rest of the globe in terms of correlations.

Two electromagnetic models were used to simulate snow emission at L-band from in situ measurements of snow properties collected at Dome C in Antarctica. Two different approaches were used: one based on the radiative transfer theory and the other on the wave approach. The soil moisture ocean salinity (SMOS) satellite observations performed at 1.4 GHz (21 cm) were used to check the validity of these models. Model results based on the wave approach were in good agreement with SMOS observations, particularly for incidence angles lower than 55°. Comparisons suggest that the wave approach is more suitable to simulate brightness temperature at L-band than the transfer radiative theory, because interference between the layers of the snowpack is better taken into account. The model based on the wave approach was then used to investigate several L-band characteristics at Dome C. The emission e-folding depth, i.e., 67% of the signal, was estimated at 250 m, and 99% of the signal emanated from the top 900 m. L-band brightness temperature is only slightly affected by seasonal variations in surface temperature, confirming the high temporal stability of snow emission at low frequency. Sensitivity tests showed that good knowledge of density variability in the snowpack is essential for accurate simulations in L-band.

The Soil Moisture and Ocean Salinity (SMOS) mission provides global surface soil moisture over the continental land surfaces. The retrieval algorithm is based on the comparison between the observations of the L-band (1.4 GHz) brightness temperatures (TB) and the simulated TB data using the L-band Microwave Emission of the Biosphere (L-MEB) model. The L-MEB model includes a dielectric model for the computation of the soil dielectric constant. Since the beginning of the mission, the Dobson model has been used in the operational SMOS algorithm. Recently, a new model of the soil dielectric constant has been developed by Mironov et al. and is now considered. This paper is the first evaluation of these two models based on the actual SMOS observations. First, both Dobson and Mironov models were modified to ensure that the SMOS retrieval algorithm converges to realistic soil moisture retrievals (symmetrization for negative soil moisture values was applied). Second, soil moisture was retrieved over several sites using both Dobson and Mironov models to compute the soil dielectric constant and were compared with in situ measurements. At a global scale, the use of the Mironov model leads to higher retrieved soil moisture than when using the Dobson model (0.033 m3/m3on average). However, the comparisons of the two model output with in situ measurements over various test sites do not demonstrate a superior performance of one model over the other.

This study investigated the use of physically based statistical regressions to retrieve a global and long term (e.g. 2003–2014) surface soil moisture (SSM) record based on a combination of passive microwave remote sensing observations from the Advanced Microwave Scanning Radiometer (AMSR-E; 2003-Sept. 2011) and the Soil Moisture and Ocean Salinity (SMOS; 2010–2014) sensors. Statistical regression methods based on bi-polarization (horizontal and vertical) brightness temperatures (Tb) observations obtained from AMSR-E. The coefficients of these regression equations were calibrated using SMOS level 3 SSM maps (SMOSL3) as a reference. This calibration process was carried out over the June 2010-Sept. 2011 period, over which both SMOS and AMSR-E observations coincide. Based on these calibrated coefficients global SSM maps could be computed from the AMSR-E Tb observations over the whole 2003–2011 period. In this study, the SSM maps were successfully evaluated against the SMOSL3 SSM products over the period of calibration (Jun. 2010-Sept. 2011). Correlations (R) and Root Mean Square Error (RMSE) were computed between the AMSR-E retrievals and the reference (SMOSL3) SSM products. The R (mostly > 0.75) and RMSE (mostly3/m3) maps showed a good agreement between the retrieved and SMOSL3 SSM products particularly over Australia, central USA, central Asia, and the Sahel. In conclusion, the statistical regression method is capable of retrieving a coherent "SMOS-AMSR-E" SSM time series for the period 2003–2014.

Performances of two global satellite-based surface soil moisture (SSM) retrievals with respect to model-based SSM derived from the MERRA (Modern-Era Retrospective analysis for Research and Applications) rea-nalysis were explored in this paper: (i) Soil Moisture and Ocean Salinity (SMOS; passive) Level-3 SSM (SMOSL3) and (ii) the Advanced Scatterometer (ASCAT; active) SSM. Temporal correlation was used to investigate the performance of SMOSL3 and ASCAT SSM products during the period 05/2010–2012 on a global basis. Both SMOSL3 and ASCAT (slightly better) captured well (R>0.70) the long-term variability of the modelled SSM, particularly, over the Indian subcontinent, the Great Plains of North America, and the Sahel. However, ASCAT had negative correlations in arid regions, in particular across the Sahara and the Arabian Peninsula. This may be due to complex scattering mechanisms over very dry surfaces. To explore the land cover dependence of the analyzed statistical indicators, the global correlation results were averaged per biome extracted from a global map of biomes. In general, SMOSL3 and ASCAT performances behaved differently from one biome to another. For SMOSL3, the highest average correlation was observed over “tropical semi-arid” (R = ∼ 0.5) and “temperate semi-arid” biomes, whereas for ASCAT, the highest correlations were observed over “tropical semi-arid” (R = ∼ 0.7) and “tropical humid” biomes. The poorest agreement for both SMOSL3 and ASCAT was generally found over “tundra” and “desert temperate” biomes, particularly for ASCAT. This study showed that the performance of both SMOSL3 and ASCAT is highly dependent on vegetation. We also showed that both of them provide complementary information on SSM, which implies a potential for data fusion which would be pertinent for the ESA climate change initiative (CCI).

The Soil Moisture Ocean Salinity (SMOS) mission was launched in 2009 and provides derived soil moisture globally using a forward modelling approach that incorporates a number of auxiliary data sets. By default, the SMOS mission uses global land cover and soils data sets to run the soil moisture retrieval models. This study examines the use of national data sets from Agriculture and Agri-Food Canada (AAFC) to determine if improvements in land cover and soils accuracies achieved using these national data sets can provide an improvement in SMOS soil moisture retrieval. Results show that changing the land cover produced the greatest differences, with a reduction in the fraction of the land area identified as forest, but also an increase in the number of failed model retrievals. The use of the AAFC soils resulted in a greater fraction of clay in the surface soil layer, but this did not have a large impact on the overall retrieval accuracy at the study sites. This suggests that the default SMOS parameterization can provide adequate estimation of soil moisture over most sites, but areas where forest, wetland or urban land cover may be over or underestimated should be more closely evaluated.

In this paper, roughness parameterizations providing best retrievals of soil moisture (SM) at L-band were evaluated. Different parameterizations were tested to find the best correlation R, bias and ubRMSE when comparing retrieved SM and in situ SM measurements carried out at the VAS (Valencia Anchor Station) over a vineyard field. Roughness measurements were always performed after the agricultural practices in the vineyard. These in situ data was used as input of the L-MEB (L-band Microwave Emission of the Biosphere) model, which permits the retrieval of SM and TAU (vegetation optical depth). In addition, a simplified method consisting on the retrieval of a parameter which combines the effects of roughness and TAU was tested. Significantly higher correlation (R=0.86) for SM was found using this method, while the absolute bias (-0.062) and RMSE (0.069) were slightly higher than for other roughness parameterizations.

The Soil Moisture and Ocean Salinity (SMOS) mission is the first satellite dedicated to providing global surface soil moisture (SM). SMOS operates at L-band and at this frequency, the signal depends on soil moisture but is also significantly affected by surface soil roughness. Using the Combined soil Roughness & Vegetation Effects (CRVE) method detailed in this paper, the effect of vegetation and soil roughness can be combined using a single parameter, referred to as TR here. SM and TR were retrieved by inverting the SMOS observations using the forward emission model (L-MEB). Assuming a linear relationship between TR and LAI obtained by the MODIS data, an Australian map of soil roughness was computed. This map could lead to improved soil moisture retrievals for present and future microwave remote sensing missions such as SMOS and the Soil Moisture Active Passive (SMAP) scheduled for launch in November 2014.

In this communication we present an update on the RFI detection used in the SMOS processing chain and some elements on quantified impact of RFIs on level 2 soil moisture products. The level 2 soil moisture algorithms which included since the beginning a screening mechanism to reject contaminated brightness temperatures is now stricter. New approaches at the level 1 processors are also emerging and will be operational at their next release in 2014. Despite these strengthen procedures, RFIs are still impacting strongly SMOS observations and examples of quantified deterioration are given.

Current and future satellite missions with L-band passive microwave radiometers could provide useful information for monitoring the soil moisture and freeze/thaw state at a global scale. The soil surface roughness plays a significant role in microwave emission from land surfaces. In this study, a simple parameterized model from exponentially correlated surface was developed. Results indicated the model can be very useful in understanding the effects of surface roughness on microwave emission.

In this paper, a numerical modeling approach was used to evaluate the semiempirical H-Q model used in the Soil Moisture and Ocean Salinity (SMOS) retrieval algorithm to account for roughness effects over bare soil. The H-Q model uses four parameters, HR, QR, NRH, and NRV, which are usually calibrated at the ground scale for different surface types. The aim of this paper is to investigate whether these empirical parameters could be linked to the physical roughness parameters of standard deviation of surface heights σ and autocorrelation length Lc. First, a numerical modeling approach was used to calculate rough soil emissivities for different roughness and soil moisture conditions. Second, H -Q model parameters were retrieved by minimizing a cost function between these emissivities and those calculated by the H -Q model. It was found that the retrieved HRcould be related directly to Zs = σ2/Lcand that QR, NRV, and NRHwere dependent on HR. HRwas found to have a negligible dependence on soil moisture. Based on these results, a new model was proposed where the four H-Q model parameters were calibrated to Zs. This model was tested on the PORTOS 1993 data set and found to yield a root-mean-square difference between the retrieved and measured soil moisture values of ~ 0.03 m3/m3, which was within the desired 0.04-m3/m3error margin for the SMOS mission.

In the above paper (ibid., vol. 49, no. 4, pp. 1177-1189, Apr. 2011), there is an error in equation (7). The explanation and corrected equation are presented here.

The MCM'10 experiment (Multi-sensors Crop Monitoring, 2010) aims to evaluate the potentialities of optical, microwave and thermal satellite images for monitoring agricultural surfaces. The Experiment is conducted during ten month in 2010, from February to November over a super-site located in the South West of France. Remote sensing data (>;150 images) are provided by nine low orbit satellites, from high to low spatial resolutions (several meters to 50km). Ground data are collected over winter and summer crops, quasi synchronously with satellite images. More than 30 000 measurements are collected over 387 agricultural fields. They concern soil and vegetation parameters (moisture, roughness, height, biomass...). Results show great complementarities of multi-sensors and multiwavelength data for monitoring agricultural landscape. The ground data collection highlights the importance of field-scale approaches, linked to the strong heterogeneity in space and time of surface parameters (soil properties, vegetation type, farmers' practices...).

The Soil Moisture and Ocean Salinity (SMOS) mission is European Space Agency (ESA's) second Earth Explorer Opportunity mission, launched in November 2009. It is a joint program between ESA Centre National d'Etudes Spatiales (CNES) and Centro para el Desarrollo Tecnologico Industrial. SMOS carries a single payload, an L-Band 2-D interferometric radiometer in the 1400-1427 MHz protected band. This wavelength penetrates well through the atmosphere, and hence the instrument probes the earth surface emissivity. Surface emissivity can then be related to the moisture content in the first few centimeters of soil, and, after some surface roughness and temperature corrections, to the sea surface salinity over ocean. The goal of the level 2 algorithm is thus to deliver global soil moisture (SM) maps with a desired accuracy of 0.04 m3/m3. To reach this goal, a retrieval algorithm was developed and implemented in the ground segment which processes level 1 to level 2 data. Level 1 consists mainly of angular brightness temperatures (TB), while level 2 consists of geophysical products in swath mode, i.e., as acquired by the sensor during a half orbit from pole to pole. In this context, a group of institutes prepared the SMOS algorithm theoretical basis documents to be used to produce the operational algorithm. The principle of the SM retrieval algorithm is based on an iterative approach which aims at minimizing a cost function. The main component of the cost function is given by the sum of the squared weighted differences between measured and modeled TB data, for a variety of incidence angles. The algorithm finds the best set of the parameters, e.g., SM and vegetation characteristics, which drive the direct TB model and minimizes the cost function. The end user Level 2 SM product contains SM, vegetation opacity, and estimated dielectric constant of any surface, TB computed at 42.5°, flags and quality indices, and other parameters of interest. This paper gives an overview of the algorithm, discusses the caveats, and provides a glimpse of the Cal Val exercises.

A simple approach for correcting for the effect of vegetation in the estimation of the surface soil moisture (wS) from L-band passive microwave observations is presented in this study. The approach is based on semi-empirical relationships between soil moisture and the polarized reflectivity including the effect of the vegetation optical depth which is parameterized as a function of the normalized vegetation difference index (NDVI). The method was tested against in situ measurements collected over a grass site from 2004 to 2007 (SMOSREX experiment). Two polarizations (horizontal/vertical) and five incidence angles (20°, 30°, 40°, 50°, and 60°) were considered in the analysis. The bestwSestimations were obtained when using both polarizations at an angle of 40°. The average accuracy in the soil moisture retrievals was found to be approximately 0.06 m3/m3, improving the estimations by 0.02 m3/m3 with respect to the case in which the vegetation effect is not considered. The results indicate that information on vegetation (through a vegetation index such as NDVI) is useful for the estimation of soil moisture through the semi-empirical regressions.

The present paper analyzes the effects of roughness on the surface emission at L-band based on observations acquired during a long-term experiment. At the Surface Monitoring of the Soil Reservoir Experiment site near Toulouse, France, a bare soil was plowed and monitored over more than a year by means of an L-band radiometer, profile soil moisture and temperature sensors, and a local weather station, accompanied by 12 roughness campaigns. The aims of this paper are the following: 1) to present this unique database and 2) to use this data set to investigate the semiempirical parameters for the roughness in L-band Microwave Emission of the Biosphere, which is the forward model used in the Soil Moisture and Ocean Salinity soil moisture retrieval algorithm. In particular, we studied the link between these semiempirical parameters and the soil roughness characteristics expressed in terms of standard deviation of surface height (σ) and the correlation length (LC). The data set verifies that roughness effects decrease the sensitivity of surface emission to soil moisture, an effect which is most pronounced at high incidence angles and soil moisture and at horizontal polarization. Contradictory to previous studies, the semiempirical parameter Qr was not found to be equal to 0 for rough conditions. A linear relationship between the semiempirical parametersNand σ was established, while NHand NVappeared to be lower for a rough (NH~ 0.59 and NV~ -0.3) than for a quasi-smooth surface. This paper reveals the complexity of roughness effects and demonstrates the great value of a sound long-term data set of rough L-band surface emissions to improve our understanding on the matter.

In the forward model [L-band microwave emission of the biosphere (L-MEB)] used in the Soil Moisture and Ocean Salinity level-2 retrieval algorithm, modeling of the roughness effects is based on a simple semiempirical approach using three main “roughness” model parameters:$H_{R}$,$Q_{R}$, and$N_{R}$. In many studies, the two parameters$Q_{R}$and$N_{R}$are set to zero. However, recent results in the literature showed that this is too approximate to accurately simulate the microwave emission of the rough soil surfaces at L-band. To investigate this, a reanalysis of the PORTOS-93 data set was carried out in this paper, considering a large range of roughness conditions. First, the results confirmed that$Q_{R}$could be set to zero. Second, a refinement of the L-MEB soil model, considering values of$N_{R}$for both polarizations (namely,$N_{\rm RV}$and$N_{\rm RH}$), improved the model accuracy. Furthermore, simple calibrations relating the retrieved values of the roughness model parameters$H_{R}$and$(N_{\rm RH} - N_{\rm RV})$to the standard deviation of the surface height were developed. This new calibration of L-MEB provided a good accuracy (better than 5 K) over a large range of soil roughness and moisture conditions of the PORTOS-93 data set. Conversely, the calibrations of the roughness effects based on the Choudhury approach, which is still widely used, provided unrealistic values of surface emissivities for medium or large roughness conditions.

The emission of bare soils at microwave L-band (1-2 GHz) frequencies is known to be correlated with surface soil moisture. Roughness plays an important role in determining soil emissivity although it is not clear which roughness length scales are most relevant. Small-scale (i.e., smaller than the resolution limit) inhomogeneities across the soil surface and with soil depth caused by both spatially varying soil properties and topographic features may affect soil emissivity. In this paper, roughness effects were investigated by comparing measured brightness temperatures of well-characterized bare soil surfaces with the results from two reflectivity models. The selected models are the air-to-soil transition model and Shi's parameterization of the integral equation model (IEM). The experimental data taken from the Surface Monitoring of the Soil Reservoir Experiment (SMOSREX) consist of surface profiles, soil permittivities and temperatures, and brightness temperatures at 1.4 GHz with horizontal and vertical polarizations. The types of correlation functions of the rough surfaces were investigated as required to evaluate Shi's parameterization of the IEM. The correlation functions were found to be clearly more exponential than Gaussian. Over the experimental period, the diurnal mean root mean square (rms) height decreased, while the correlation length and the type of correlation function did not change. Comparing the reflectivity models with respect to their sensitivities to the surface rms height and correlation length revealed distinct differences. Modeled reflectivities were tested against reflectivities derived from measured brightness, which showed that the two models perform differently depending on the polarization and the observation angle.

Soil moisture retrieval models from the Soil Moisture and Ocean Salinity (SMOS) mission, which is an L-band microwave interferometer, are based on multiangular measurements and make use of the emissivity angular signature. Mountainous areas modify local incidence angles, implying significant impacts on brightness temperatures and, consequently, on soil moisture retrievals. The purpose of this paper is to establish a criterion in quantifying the relevance of topographic impacts at the SMOS scale ( ~ 40 km). The goal is thus to define a method of flagging the pixels according to the relative impact of topography on the brightness temperature. The proposed method uses the variogram of digital elevation model images. As a result, a map of the pixels to be flagged is produced to ensure that no soil moisture retrievals are carried out on pixels that are affected by strong topographic effects. As validation, a model was also used to simulate differences between brightness temperature variations between mountainous areas and flat surfaces.

This contribution summarizes prominent features of the Level 2 algorithm aimed at processing land surface geophysical quantities from the ESA-led SMOS mission. It emphasizes the soil moisture retrieval and describes the decision tree built in order to select appropriate retrieval configurations. The expected performance is illustrated by preliminary results of the algorithm validation.