For spectral efficiency, higher order modulation symbols confer information on more than one bit. As soft detection forward error correction decoders assume the availability of information at binary granularity, however, soft demappers are required to compute per-bit reliabilities from complex-valued signals. Here we show that the recently introduced universal soft detection decoder ORBGRAND can be adapted to work with symbol-level soft information, obviating the need for energy expensive soft demapping. We establish that doing so reduces complexity while retaining the error correction performance achieved with the optimal demapper.

This work presents an interactive real-time demonstration of the first-integrated universal soft-detection decoder with an ultra-low energy consumption of 0.76pJ/bit and the lowest power of 4.9mW using Ordered Reliability Bits Guessing Random Additive Noise Decoding (ORBGRAND) [1]. The chip has a reconfigurable code length of 32 to 256 bits. The chip’s universality is demonstrated by decoding multimedia messages using different codebooks through an interactive Graphics User Interface (GUI). It is shown that the chip’s performance is independent of the codebook used and dynamically adapts to the channel noise conditions where lower energy is consumed as the Signal-to-Noise Ratio (SNR) of the channel improves.

While many communications media, such as wireless and certain classes of wireline channels, typically lead to bursty errors, most decoders are designed assuming memoryless channels. Consequently, communication systems generally rely on interleaving over tens of thousands of bits to match decoder assumptions. Even for short high rate codes, awaiting sufficient data in interleaving and de-interleaving is a significant source of unwanted latency. We construct an extension to the recently proposed Guessing Random Additive Noise Decoding (GRAND) algorithm, which we call GRAND-MO for GRAND Markov Order. By foregoing interleaving and instead making use of the bursty nature of noise, low-latency communication is possible with block error rates outperforming their interleaved counterparts by a substantial margin. We establish that certain well-known binary codes with structured code-word patterns are ill-suited for use in bursty channels, but Random Linear Codes (RLCs) prove robust to correlated noise. We further demonstrate that by operating directly on modulated symbols rather than de-mapped bits, GRAND-MO achieves further performance and complexity gains by exploiting information that is lost in demodulation. As a result, GRAND-MO provides one potential solution for applications that require ultra-reliable low latency communication.

The design and implementation of error correcting codes has long been informed by two fundamental results: Shannon’s 1948 capacity theorem, which established that long codes use noisy channels most efficiently; and Berlekamp, McEliece, and Van Tilborg’s 1978 theorem on the NP-completeness of decoding linear codes. These results shifted focus away from creating code-independent decoders, but recent low-latency communication applications necessitate relatively short codes, providing motivation to reconsider the development of universal decoders. We introduce a scheme for employing binarized symbol soft information within Guessing Random Additive Noise Decoding, a universal hard detection decoder. We incorporate codebook-independent quantization of soft information to indicate demodulated symbols to be reliable or unreliable. We introduce two decoding algorithms: one identifies a conditional Maximum Likelihood (ML) decoding; the other either reports a conditional ML decoding or an error. For random codebooks, we present error exponents and asymptotic complexity, and show benefits over hard detection. As empirical illustrations, we compare performance with majority logic decoding of Reed-Muller codes, with Berlekamp-Massey decoding of Bose-Chaudhuri-Hocquenghem codes, with CA-SCL decoding of CA-Polar codes, and establish the performance of Random Linear Codes, which require a universal decoder and offer a broader palette of code sizes and rates than traditional codes.

CRC codes have long since been adopted in a vast range of applications. The established notion that they are suitable primarily for error detection can be set aside through use of the recently proposed Guessing Random Additive Noise Decoding (GRAND). Hard-detection (GRAND-SOS) and soft-detection (ORBGRAND) variants can decode any short, high-rate block code, making them suitable for error correction of CRC-coded data. When decoded with GRAND, short CRC codes have error correction capability that is at least as good as popular codes such as BCH codes, but with no restriction on either code length or rate.The state-of-the-art CA-Polar codes are concatenated CRC and Polar codes. For error correction, we find that the CRC is a better short code than either Polar or CA-Polar codes. Moreover, the standard CA-SCL decoder only uses the CRC for error detection and therefore suffers severe performance degradation in short, high rate settings when compared with the performance GRAND provides, which uses all of the CA-Polar bits for error correction.Using GRAND, existing systems can be upgraded from error detection to low-latency error correction without re-engineering the encoder, and additional applications of CRCs can be found in IoT, Ultra-Reliable Low Latency Communication (URLLC), and beyond. The universality of GRAND, its ready parallelized implementation in hardware, and the good performance of CRC as codes make their combination a viable solution for low-latency applications.

To facilitate applications in IoT, 5G, and beyond, there is an engineering need to enable high-rate, low-latency communications. Errors in physical channels typically arrive in clumps, but most decoders are designed assuming that channels are memoryless. As a result, communication networks rely on interleaving over tens of thousands of bits so that channel conditions match decoder assumptions. Even for short high rate codes, awaiting sufficient data to interleave at the sender and de-interleave at the receiver is a significant source of unwanted latency. Using existing decoders with non-interleaved channels causes a degradation in block error rate performance owing to mismatch between the decoder's channel model and true channel behaviour.Through further development of the recently proposed Guessing Random Additive Noise Decoding (GRAND) algorithm, which we call GRAND-MO for GRAND Markov Order, here we establish that by abandoning interleaving and embracing bursty noise, low-latency, short-code, high-rate communication is possible with block error rates that outperform their interleaved counterparts by a substantial margin. Moreover, while most decoders are twinned to a specific code-book structure, GRANDMO can decode any code. Using this property, we establish that certain well-known structured codes are ill-suited for use in bursty channels, but Random Linear Codes (RLCs) are robust to correlated noise. This work suggests that the use of RLCs with GRAND-MO is a good candidate for applications requiring high throughput with low latency.