A thorough understanding of cell-line drug response mechanisms is crucial for drug development, repurposing, and resistance reversal. While targeted anticancer therapies have shown promise, not all cancers have well-established biomarkers to stratify drug response. Single-gene associations only explain a small fraction of the observed drug sensitivity, so a more comprehensive method is needed. However, while deep learning models have shown promise in predicting drug response in cell lines, they still face significant challenges when it comes to their application in clinical applications. Therefore, this study proposed a new strategy called DD-Response for cell-line drug response prediction. First, a limitation of narrow modeling horizons was overcome to expand the model training domain by integrating multiple datasets through source-specific label binarization. Second, a modified representation based on a two-dimensional structurized gridding map (SGM) was developed for cell lines & drugs, avoiding feature correlation neglect and potential information loss. Third, a dual-branch, multi-channel convolutional neural network-based model for pairwise response prediction was constructed, enabling accurate outcomes and improved exploration of underlying mechanisms. As a result, the DD-Response demonstrated superior performance, captured cell-line characteristic variations, and provided insights into key factors impacting cell-line drug response. In addition, DD-Response exhibited scalability in predicting clinical patient responses to drug therapy. Overall, because of DD-response's excellent ability to predict drug response and capture key molecules behind them, DD-response is expected to greatly facilitate drug discovery, repurposing, resistance reversal, and therapeutic optimization.

Due to its promising capacity in improving drug efficacy, polypharmacology has emerged to be a new theme in the drug discovery of complex disease. In the process of novel multi-target drugs (MTDs) discovery, in silico strategies come to be quite essential for the advantage of high throughput and low cost. However, current researchers mostly aim at typical closely related target pairs. Because of the intricate pathogenesis networks of complex diseases, many distantly related targets are found to play crucial role in synergistic treatment. Therefore, an innovational method to develop drugs which could simultaneously target distantly related target pairs is of utmost importance. At the same time, reducing the false discovery rate in the design of MTDs remains to be the daunting technological difficulty. In this research, effective small molecule clustering in the positive dataset, together with a putative negative dataset generation strategy, was adopted in the process of model constructions. Through comprehensive assessment on 10 target pairs with hierarchical similarity-levels, the proposed strategy turned out to reduce the false discovery rate successfully. Constructed model types with much smaller numbers of inhibitor molecules gained considerable yields and showed better false-hit controllability than before. To further evaluate the generalization ability, an in-depth assessment of high-throughput virtual screening on ChEMBL database was conducted. As a result, this novel strategy could hierarchically improve the enrichment factors for each target pair (especially for those distantly related/unrelated target pairs), corresponding to target pair similarity-levels.

In a drug formulation (DFM), the major components by mass are not Active Pharmaceutical Ingredient (API) but rather Drug Inactive Ingredients (DIGs). DIGs can reach much higher concentrations than that achieved by API, which raises great concerns about their clinical toxicities. Therefore, the biological activities of DIG on physiologically relevant target are widely demanded by both clinical investigation and pharmaceutical industry. However, such activity data are not available in any existing pharmaceutical knowledge base, and their potentials in predicting the DIG-target interaction have not been evaluated yet. In this study, the comprehensive assessment and analysis on the biological activities of DIGs were therefore conducted. First, the largest number of DIGs and DFMs were systematically curated and confirmed based on all drugs approved by US Food and Drug Administration. Second, comprehensive activities for both DIGs and DFMs were provided for the first time to pharmaceutical community. Third, the biological targets of each DIG and formulation were fully referenced to available databases that described their pharmaceutical/biological characteristics. Finally, a variety of popular artificial intelligence techniques were used to assess the predictive potential of DIGs' activity data, which was the first evaluation on the possibility to predict DIG's activity. As the activities of DIGs are critical for current pharmaceutical studies, this work is expected to have significant implications for the future practice of drug discovery and precision medicine.

In recent years, many studies have illustrated the significant role that non-coding RNA (ncRNA) plays in biological activities, in which lncRNA, miRNA and especially their interactions have been proved to affect many biological processes. Some in silico methods have been proposed and applied to identify novel lncRNA-miRNA interactions (LMIs), but there are still imperfections in their RNA representation and information extraction approaches, which imply there is still room for further improving their performances. Meanwhile, only a few of them are accessible at present, which limits their practical applications. The construction of a new tool for LMI prediction is thus imperative for the better understanding of their relevant biological mechanisms. This study proposed a novel method, ncRNAInter, for LMI prediction. A comprehensive strategy for RNA representation and an optimized deep learning algorithm of graph neural network were utilized in this study. ncRNAInter was robust and showed better performance of 26.7% higher Matthews correlation coefficient than existing reputable methods for human LMI prediction. In addition, ncRNAInter proved its universal applicability in dealing with LMIs from various species and successfully identified novel LMIs associated with various diseases, which further verified its effectiveness and usability. All source code and datasets are freely available at https://github.com/idrblab/ncRNAInter.

Metaproteomics suffers from the issues of dimensionality and sparsity. Data reduction methods can maximally identify the relevant subset of significant differential features and reduce data redundancy. Feature selection (FS) methods were applied to obtain the significant differential subset. So far, a variety of feature selection methods have been developed for metaproteomic study. However, due to FS's performance depended heavily on the data characteristics of a given research, the well-suitable feature selection method must be carefully selected to obtain the reproducible differential proteins. Moreover, it is critical to evaluate the performance of each FS method according to comprehensive criteria, because the single criterion is not sufficient to reflect the overall performance of the FS method. Therefore, we developed an online tool named MetaFS, which provided 13 types of FS methods and conducted the comprehensive evaluation on the complex FS methods using four widely accepted and independent criteria. Furthermore, the function and reliability of MetaFS were systematically tested and validated via two case studies. In sum, MetaFS could be a distinguished tool for discovering the overall well-performed FS method for selecting the potential biomarkers in microbiome studies. The online tool is freely available at https://idrblab.org/metafs/.

The type IV bacterial secretion system (SS) is reported to be one of the most ubiquitous SSs in nature and can induce serious conditions by secreting type IV SS effectors (T4SEs) into the host cells. Recent studies mainly focus on annotating new T4SE from the huge amount of sequencing data, and various computational tools are therefore developed to accelerate T4SE annotation. However, these tools are reported as heavily dependent on the selected methods and their annotation performance need to be further enhanced. Herein, a convolution neural network (CNN) technique was used to annotate T4SEs by integrating multiple protein encoding strategies. First, the annotation accuracies of nine encoding strategies integrated with CNN were assessed and compared with that of the popular T4SE annotation tools based on independent benchmark. Second, false discovery rates of various models were systematically evaluated by (1) scanning the genome of Legionella pneumophila subsp. ATCC 33152 and (2) predicting the real-world non-T4SEs validated using published experiments. Based on the above analyses, the encoding strategies, (a) position-specific scoring matrix (PSSM), (b) protein secondary structure & solvent accessibility (PSSSA) and (c) one-hot encoding scheme (Onehot), were identified as well-performing when integrated with CNN. Finally, a novel strategy that collectively considers the three well-performing models (CNN-PSSM, CNN-PSSSA and CNN-Onehot) was proposed, and a new tool (CNN-T4SE, https://idrblab.org/cnnt4se/) was constructed to facilitate T4SE annotation. All in all, this study conducted a comprehensive analysis on the performance of a collection of encoding strategies when integrated with CNN, which could facilitate the suppression of T4SS in infection and limit the spread of antimicrobial resistance.

This paper presents a phenology-preserving filtering method as a significant improvement to the standard changing-weight filter method to reduce noise in NDVI time series. Specifically it introduces two new features: (1) replacing the changing-weight filter with a 3-point Gaussian filter to improve the computing efficiency; and (2) introducing a multi-year average NDVI time series to remove the false local minima points. This phenology-preserving filtering method was tested at 178 test points for 15 land cover types and 6 test regions around the world using the 250 m 16-day MODIS NDVI product. The results were evaluated in comparison with the original changing-weight filter and other three popular filtering methods. The visual and quantitative analyses demonstrate that the phenology-preserving filtering method can effectively reduce noise and preserve the integrity of the time series with a high computing efficiency.

This paper evaluated the extraction rate and accuracy of 5 phenology extracting method, taking the vegetation phenological metrics derived from the net ecosystem carbon exchange (NEE) data of 72 flux towers in North America as the reference data. The results indicated that the local midpoint method achieved the highest extraction rate and accuracy. Better performance was observed for the moving average method and the polynomial function fitting method. However, the extraction rate and accuracy of the moving average method were sensitive to the moving window size. The global threshold method performed quite poor. The phenological metrics extracted with the piecewise Logistic function fitting method had a large systematic discrepancy with the NEE derived phenological metrics but there was a strong correlation between them, which indicated that the vegetation phenological metrics extracted with the piecewise Logistic function fitting method can reflect the temporal and spatial variation of vegetation phenology.

Time-series data of normalized difference vegetation index (NDVI), derived from satellite sensors, can be used to support land-cover change detection and phenological interpretations, but further analysis and applications are hindered by residual noise in the data. As an alternative to a number of existing algorithms developed to compensate for such noise, we develop a simple but computationally efficient method (which we call the changing-weight filter method) to reconstruct a high-quality NDVI time series. The new algorithm consists of two major procedures: (1) detecting the local maximum/minimum points in a growth cycle along an NDVI temporal profile based on a mathematical morphology algorithm and a rule-based decision process and (2) filtering an NDVI time series with a three-point changing-weight filter. This method is tested at 470 test points for 55 vegetation types and a test region in China using a 250-m 16-day Moderate Resolution Imaging Spectroradiometer (MODIS) NDVI product. Comparing our results to those of three other well-known methods-asymmetric Gaussian function fitting, double logistic function fitting, and Savitzky-Golay filtering-the new method has many of the advantages of existing methods, while in some cases, the changing-weight filter method more effectively preserves the curve shape as well as the timing and the amplitude of the local maxima/minima in the NDVI time series for a broad range of phenologies. Moreover, the response of the filtering algorithm is relatively insensitive to the exact values of its design parameters, making the new method more flexible and effective in adjusting to fit a variety of classes of NDVI time series.