The CABS model can be applied to a wide range of protein-protein and protein-peptide molecular modeling tasks, such as simulating folding pathways, predicting structures, docking, and analyzing the structural dynamics of molecular complexes. In this work, we use the CABS-dock tool in two diverse modeling tasks: 1) predicting the structures of amyloid protofilaments and 2) identifying cleavage sites in the peptide substrates of proteolytic enzymes. In the first case, simulations of the simultaneous docking of amyloidogenic peptides indicated that the CABS model can accurately predict the structures of amyloid protofilaments which have an in-register parallel architecture. Scoring based on a combination of symmetry criteria and estimated interaction energy values for bound monomers enables the identification of protofilament models that closely match their experimental structures for 5 out of 6 analyzed systems. For the second task, it has been shown that CABS-dock coarse-grained docking simulations can be used to identify the positions of cleavage sites in the peptide substrates of proteolytic enzymes. The cleavage site position was correctly identified for 12 out of 15 analyzed peptides. When combined with sequence-based methods, these docking simulations may lead to an efficient way of predicting cleavage sites in degraded proteins. The method also provides the atomic structures of enzyme-substrate complexes, which can give insights into enzyme-substrate interactions that are crucial for the design of new potent inhibitors.

CABS-dock is a computational method for protein-peptide molecular docking that does not require predefinition of the binding site. The peptide is treated as fully flexible, while the protein backbone undergoes small fluctuations and, optionally, large-scale rearrangements. Here, we present a specific CABS-dock protocol that enhances the docking procedure using fragmentary information about protein-peptide contacts. The contact information is used to narrow down the search for the binding peptide pose to the proximity of the binding site. We used information on a single-chosen and randomly chosen native protein-peptide contact to validate the protocol on the peptiDB benchmark. The contact information significantly improved CABS-dock performance. The protocol has been made available as a new feature of the CABS-dock web server (at http://biocomp.chem.uw.edu.pl/CABSdock/). SHORT ABSTRACT: CABS-dock is a tool for flexible docking of peptides to proteins. In this article, we present a protocol for CABS-dock docking driven by information about protein-peptide contact(s). Using information on individual protein-peptide contacts allows to improve the accuracy of CABS-dock docking.

SUMMARY: CABS-dock standalone is a multiplatform Python package for protein-peptide docking with backbone flexibility. The main feature of the CABS-dock method is its ability to simulate significant backbone flexibility of the entire protein-peptide system in a reasonable computational time. In the default mode, the package runs a simulation of fully flexible peptide searching for a binding site on the surface of a flexible protein receptor. The flexibility level of the molecules may be defined by the user. Furthermore, the CABS-dock standalone application provides users with full control over the docking simulation from the initial setup to the analysis of results. The standalone version is an upgrade of the original web server implementation-it introduces a number of customizable options, provides support for large-sized systems and offers a framework for deeper analysis of docking results. AVAILABILITY AND IMPLEMENTATION: CABS-dock standalone is distributed under the MIT licence, which is free for academic and non-profit users. It is implemented in Python and Fortran. The CABS-dock standalone source code, wiki with documentation and examples of use and installation instructions for Linux, macOS and Windows are available in the CABS-dock standalone repository at https://bitbucket.org/lcbio/cabsdock.

SUMMARY: CABS-flex standalone is a Python package for fast simulations of protein structure flexibility. The package combines simulations of protein dynamics using CABS coarse-grained protein model with the reconstruction of selected models to all-atom representation and analysis of modeling results. CABS-flex standalone is designed to allow for command-line access to the CABS computations and complete control over simulation process. CABS-flex standalone is equipped with features such as: modeling of multimeric and large-size protein systems, contact map visualizations, analysis of similarities to the reference structure and configurable modeling protocol. For instance, the user may modify the simulation parameters, distance restraints, structural clustering scheme or all-atom reconstruction parameters. With these features CABS-flex standalone can be easily incorporated into other methodologies of structural biology. AVAILABILITY AND IMPLEMENTATION: CABS-flex standalone is distributed under the MIT license, which is free for academic and non-profit users. It is implemented in Python. CABS-flex source code, wiki with examples of use and installation instructions for Linux, macOS and Windows are available from the CABS-flex standalone repository at https://bitbucket.org/lcbio/cabsflex.

MOTIVATION: Comparing protein tertiary structures is a fundamental procedure in structural biology and protein bioinformatics. Structure comparison is important particularly for evaluating computational protein structure models. Most of the model structure evaluation methods perform rigid body superimposition of a structure model to its crystal structure and measure the difference of the corresponding residue or atom positions between them. However, these methods neglect intrinsic flexibility of proteins by treating the native structure as a rigid molecule. Because different parts of proteins have different levels of flexibility, for example, exposed loop regions are usually more flexible than the core region of a protein structure, disagreement of a model to the native needs to be evaluated differently depending on the flexibility of residues in a protein. RESULTS: We propose a score named FlexScore for comparing protein structures that consider flexibility of each residue in the native state of proteins. Flexibility information may be extracted from experiments such as NMR or molecular dynamics simulation. FlexScore considers an ensemble of conformations of a protein described as a multivariate Gaussian distribution of atomic displacements and compares a query computational model with the ensemble. We compare FlexScore with other commonly used structure similarity scores over various examples. FlexScore agrees with experts' intuitive assessment of computational models and provides information of practical usefulness of models. AVAILABILITY AND IMPLEMENTATION: https://bitbucket.org/mjamroz/flexscore CONTACT: [email protected] SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

BACKGROUND: Protein secondary structure prediction (SSP) has been an area of intense research interest. Despite advances in recent methods conducted on large datasets, the estimated upper limit accuracy is yet to be reached. Since the predictions of SSP methods are applied as input to higher-level structure prediction pipelines, even small errors may have large perturbations in final models. Previous works relied on cross validation as an estimate of classifier accuracy. However, training on large numbers of protein chains compromises the classifier ability to generalize to new sequences. This prompts a novel approach to training and an investigation into the possible structural factors that lead to poor predictions. Here, a small group of 55 proteins termed the compact model is selected from the CB513 dataset using a heuristics-based approach. In a prior work, all sequences were represented as probability matrices of residues adopting each of Helix, Sheet and Coil states, based on energy calculations using the C-Alpha, C-Beta, Side-chain (CABS) algorithm. The functional relationship between the conformational energies computed with CABS force-field and residue states is approximated using a classifier termed the Fully Complex-valued Relaxation Network (FCRN). The FCRN is trained with the compact model proteins. RESULTS: The performance of the compact model is compared with traditional cross-validated accuracies and blind-tested on a dataset of G Switch proteins, obtaining accuracies of ∼81 %. The model demonstrates better results when compared to several techniques in the literature. A comparative case study of the worst performing chain identifies hydrogen bond contacts that lead to Coil ⇔ Sheet misclassifications. Overall, mispredicted Coil residues have a higher propensity to participate in backbone hydrogen bonding than correctly predicted Coils. CONCLUSIONS: The implications of these findings are: (i) the choice of training proteins is important in preserving the generalization of a classifier to predict new sequences accurately and (ii) SSP techniques sensitive in distinguishing between backbone hydrogen bonding and side-chain or water-mediated hydrogen bonding might be needed in the reduction of Coil ⇔ Sheet misclassifications.

MOTIVATION: Identification of flexible regions of protein structures is important for understanding of their biological functions. Recently, we have developed a fast approach for predicting protein structure fluctuations from a single protein model: the CABS-flex. CABS-flex was shown to be an efficient alternative to conventional all-atom molecular dynamics (MD). In this work, we evaluate CABS-flex and MD predictions by comparison with protein structural variations within NMR ensembles. RESULTS: Based on a benchmark set of 140 proteins, we show that the relative fluctuations of protein residues obtained from CABS-flex are well correlated to those of NMR ensembles. On average, this correlation is stronger than that between MD and NMR ensembles. In conclusion, CABS-flex is useful and complementary to MD in predicting protein regions that undergo conformational changes as well as the extent of such changes. AVAILABILITY AND IMPLEMENTATION: The CABS-flex is freely available to all users at http://biocomp.chem.uw.edu.pl/CABSflex. CONTACT: [email protected] SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

BACKGROUND: The comparative modeling approach to protein structure prediction inherently relies on a template structure. Before building a model such a template protein has to be found and aligned with the query sequence. Any error made on this stage may dramatically affects the quality of result. There is a need, therefore, to develop accurate and sensitive alignment protocols. RESULTS: BioShell threading software is a versatile tool for aligning protein structures, protein sequences or sequence profiles and query sequences to a template structures. The software is also capable of sub-optimal alignment generation. It can be executed as an application from the UNIX command line, or as a set of Java classes called from a script or a Java application. The implemented Monte Carlo search engine greatly facilitates the development and benchmarking of new alignment scoring schemes even when the functions exhibit non-deterministic polynomial-time complexity. CONCLUSIONS: Numerical experiments indicate that the new threading application offers template detection abilities and provides much better alignments than other methods. The package along with documentation and examples is available at: http://bioshell.pl/threading3d.

BACKGROUND: The development, optimization and validation of protein modeling methods require efficient tools for structural comparison. Frequently, a large number of models need to be compared with the target native structure. The main reason for the development of Clusco software was to create a high-throughput tool for all-versus-all comparison, because calculating similarity matrix is the one of the bottlenecks in the protein modeling pipeline. RESULTS: Clusco is fast and easy-to-use software for high-throughput comparison of protein models with different similarity measures (cRMSD, dRMSD, GDT_TS, TM-Score, MaxSub, Contact Map Overlap) and clustering of the comparison results with standard methods: K-means Clustering or Hierarchical Agglomerative Clustering. CONCLUSIONS: The application was highly optimized and written in C/C++, including the code for parallel execution on CPU and GPU, which resulted in a significant speedup over similar clustering and scoring computation programs.

In this Note we present a new software library for structural bioinformatics. The library contains programs, computing sequence- and profile-based alignments and a variety of structural calculations with user-friendly handling of various data formats. The software organization is very flexible. Algorithms are written in Java language and may be used by Java programs. Moreover the modules can be accessed from Jython (Python scripting language implemented in Java) scripts. Finally, the new version of BioShell delivers several utility programs that can do typical bioinformatics task from a command-line level. Availability The software is available for download free of charge from its website: http://bioshell.chem.uw.edu.pl. This website provides also numerous examples, code snippets and API documentation.

UNLABELLED: Molecular dynamics and Monte Carlo, usually conducted in canonical ensemble, deliver a plethora of biomolecular conformations. Proper analysis of the simulation data is a crucial part of biophysical and bioinformatics studies. Sequence alignment problem can be also formulated in terms of Boltzmann distribution. Therefore tools for efficient analysis of canonical ensemble data become extremely valuable. T-Pile package, presented here provides a user-friendly implementation of most important algorithms such as multihistogram analysis and reweighting technique. The package can be used in studies of virtually any system governed by Boltzmann distribution. AVAILABILITY: T-Pile can be downloaded from: http://biocomp.chem.uw.edu.pl/services/tpile. These pages provide a comprehensive tutorial and documentation with illustrative examples of applications. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

MOTIVATION: The number of known protein sequences is about thousand times larger than the number of experimentally solved 3D structures. For more than half of the protein sequences a close or distant structural analog could be identified. The key starting point in a classical comparative modeling is to generate the best possible sequence alignment with a template or templates. With decreasing sequence similarity, the number of errors in the alignments increases and these errors are the main causes of the decreasing accuracy of the molecular models generated. Here we propose a new approach to comparative modeling, which does not require the implicit alignment - the model building phase explores geometric, evolutionary and physical properties of a template (or templates). RESULTS: The proposed method requires prior identification of a template, although the initial sequence alignment is ignored. The model is built using a very efficient reduced representation search engine CABS to find the best possible superposition of the query protein onto the template represented as a 3D multi-featured scaffold. The criteria used include: sequence similarity, predicted secondary structure consistency, local geometric features and hydrophobicity profile. For more difficult cases, the new method qualitatively outperforms existing schemes of comparative modeling. The algorithm unifies de novo modeling, 3D threading and sequence-based methods. The main idea is general and could be easily combined with other efficient modeling tools as Rosetta, UNRES and others.

SUMMARY: BioShell is a suite of programs performing common tasks accompanying protein structure modeling. BioShell design is based on UNIX shell flexibility and should be used as its extension. Using BioShell various molecular modeling procedures can be integrated in a single pipeline. AVAILABILITY: BioShell package can be downloaded from its website http://biocomp.chem.uw.edu.pl/BioShell and these pages provide many examples and a detailed documentation for the newest version.

MOTIVATION: Knowledge-based potentials are valuable tools for protein structure modeling and evaluation of the quality of the structure prediction obtained by a variety of methods. Potentials of such type could be significantly enhanced by a proper exploitation of the evolutionary information encoded in related protein sequences. The new potentials could be valuable components of threading algorithms, ab-initio protein structure prediction, comparative modeling and structure modeling based on fragmentary experimental data. RESULTS: A new potential for scoring local protein geometry is designed and evaluated. The approach is based on the similarity of short protein fragments measured by an alignment of their sequence profiles. Sequence specificity of the resulting energy function has been compared with the specificity of simpler potentials using gapless threading and the ability to predict specific geometry of protein fragments. Significant improvement in threading sensitivity and in the ability to generate sequence-specific protein-like conformations has been achieved.

HCPM is a tool for clustering protein structures from comparative modeling, ab initio structure prediction, etc. A hierarchical clustering algorithm is designed and tested, and a heuristic is provided for an optimal cluster selection. The method has been successfully tested during the CASP6 experiment.