The surface water and ocean topography (SWOT) mission offers groundbreaking opportunities to observe fine-scale spatial changes in low elevation coastal zones (LECZs). This study explores the first SWOT data in one of the mission’s most challenging environments: a data-scarce, tropical region with flat topography, heavy urbanization, and a river with a weak, tidally influenced slope. We focus on SWOT’s water surface elevation (WSE) and water surface slope (WSS) products at the reach level, comparing the measurements to in situ data. Our analysis shows that about half of SWOT’s WSE and WSS measurements fall within the desired error budgets, though WSS lacks linear correlation with in situ data. At this early stage, both SWOT’s WSE and WSS require validation in such complex areas. However, as SWOT’s high-resolution observations improve over time and are integrated with other data, they are expected to provide valuable insights into dynamic river and estuarine processes.

Recent applications of passive L-band observations from space are summarized for ocean, land surface and cryosphere applications. The main limitation of the measurements performed by the current generation of sensors is the spatial resolution. The need of a mission ensuring the continuation of L-band measurements from space with high spatial resolution (10-15 km) is discussed.

International audience

The Soil Moisture and Ocean Salinity (SMOS) satellite is performing systematic L-band observations since 2009, allowing a large number of science and operational applications. Several recent studies have shown the need of the continuity of L-band observations, in particular with an increased angular resolution. In this contribution, two instrumental concepts are presented to reach native resolutions of 5–10 km. In addition, using airborne data, it is also shown that the accuracy of downscaling coarser resolution L-band data to 5–10 km using a high resolution auxiliary data set, is significantly lower than that of native high resolution observations.

The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) has been providing the longest consistent data record of passive L-band (1.4 GHz) observations for more than ten years. SMOS, as well as the NASA missions SMAP and Aquarius have demonstrated the interest of L-band observations for land, ocean and cryosphere studies. The continuity of L-band observations must be assured taking into account that the spatial resolution (~ 40 km) of SMOS and SMAP is too coarse for some applications. Disaggregation strategies can be implemented but using airborne data, we show that the quality of the downscaled data cannot match that of an instrument with higher native resolution. The goal of the SMOS-HR (High Resolution) mission is to ensure the continuity of L-band observations while increasing the native resolution to 10 km. SMOS-HR will carry an array of ~ 230 antennas to perform aperture synthesis. The antenna distribution has been optimized to reduce the aliasing in the reconstructed images and SMOS-HR will incorporate advanced on-board Radio Frequency Interferences (RFI) mitigation techniques.

The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) satellite has provided, for the first time, systematic passive L-band (1.4 GHz) measurements from space. This new data set, with a spatial resolution of ~40 km, has allowed a number of outstanding results over land (soil moisture, vegetation properties, frozen soils, ...), ocean (salinity, meso-scale phenomena, river plumes, high winds, ...) and cryosphere. SMOS, together with the NASA missions SMAP and Aquarius, have demonstrated the interest of the continuity of L-band observations. However, higher spatial resolution (1-10 km) is needed for applications related to water resources management and food security, for instance. Over the ocean as well as in coastal areas, higher resolution will bring the possibility to study in detail meso-scale processes and salinity (and density) variations closer to the coast. Over ice, higher spatial resolution will allow to monitor melting events in the coastal regions of Antarctica, for instance. In order to ensure the continuity of Earth observations in the L-band, while improving the resolution of the current generation of radiometers, new mission concepts are needed. We present the SMOS-HR (High-Resolution) project, which is currently in Phase 0 at CNES (Centre National d'Etudes Spatiales).

Soil moisture retrieval from microwave remote sensing brightness temperatures is in continuous development. In this study, the most recent and latest microwave remote sensing soil moisture products were evaluated against ground-based measurements. We compared, for the first time, the latest versions of SMOS (L2V650 and SMOS-IC V105), SMAP (L3V4), and CCI (V03.2) soil moisture products with respect to ground-based measurements obtained from ISMN (International Soil Moisture Network). Time series were plotted over some sites and it was found that all these products capture well the temporal dynamics over all the sites used in this study. However, CCI was wetter than the in situ measurements over Niger and both SMOS products (IC and L2) and SMAP were drier than the in situ observations over Biebrza site in Poland.

In 2017, the new SMOS-IC retrieval product of soil moisture (SM) and L-band Vegetation Optical depth (L-VOD) was developed. This product relies on a two-parameter inversion of the L-MEB model (L-band Microwave Emission of the Biosphere) which requires little ancillary information and was found to be accurate, making it very well-suited for application in agriculture, hydrology, climate and vegetation monitoring. In this communication we present recent improvements in the SMOS-IC retrieval algorithm and recent applications using the soil moisture or VOD retrievals from the SMOS-IC data set. SMOS-IC SM is available at the French CATDS center.

The Soil Moisture and Ocean Salinity (SMOS) mission provides global surface soil moisture over the continental land surfaces. The retrieval algorithm is based on the comparison between the observations of the L-band (1.4 GHz) brightness temperatures (TB) and the simulated TB data using the L-band Microwave Emission of the Biosphere (L-MEB) model. The L-MEB model includes a dielectric model for the computation of the soil dielectric constant. Since the beginning of the mission, the Dobson model has been used in the operational SMOS algorithm. Recently, a new model of the soil dielectric constant has been developed by Mironov et al. and is now considered. This paper is the first evaluation of these two models based on the actual SMOS observations. First, both Dobson and Mironov models were modified to ensure that the SMOS retrieval algorithm converges to realistic soil moisture retrievals (symmetrization for negative soil moisture values was applied). Second, soil moisture was retrieved over several sites using both Dobson and Mironov models to compute the soil dielectric constant and were compared with in situ measurements. At a global scale, the use of the Mironov model leads to higher retrieved soil moisture than when using the Dobson model (0.033 m3/m3on average). However, the comparisons of the two model output with in situ measurements over various test sites do not demonstrate a superior performance of one model over the other.

A long term profile soil moisture data acquisition effort is currently under way at 12 monitoring stations across southwestern France. The spatial distribution and set-up of those sites was specifically designed for validating remote sensing and model soil moisture estimates [1], [2]. Those m-situ measurements are used to test a simple method to retrieve root zone soil moisture from a time series of surface soil moisture information. A recursive exponential filter using a time constant, T, is used to compute a profile soil water index from the surface observations. Through optimisation, a unique value for T of 6 days is found to result in a satisfactory correlation between observation and estimate for all stations. The surface soil moisture observed is also used to evaluate the normalized surface soil moisture estimates derived from coarse resolution (25 km) active microwave data of the ASCAT C-band. For 11 stations, significant correlation levels are found. The best correlation between a soil water index derived from ASCAT and the in-situ observations is obtained for a T of 14 days.

Methods to retrieve surface soil moisture were assessed at the global scale for one entire year by using simulated Soil Moisture and Ocean Salinity brightness temperatures (TB) and vegetation coverage information which can be derived from optical sensors. The globalTBdatabase consists of half-degree continental pixels and accounts for within-pixel heterogeneity, based on 1-km resolution land cover maps. The retrievals were performed by using a three-parameter inversion method applied to the L-band Microwave Emission of the Biosphere model. By using a Bayesian approach, vegetation data were injected as a priori information. Two options were investigated to profit from normalized difference vegetation index products: providing an a priori knowledge either on vegetation optical depth or on the vegetation cover fraction (fcover). The latter option allows for a better description of the surface heterogeneity by considering a bare soil fraction. When an error of 1 K is applied to theTB, both synergistic schemes significantly improved the soil moisture accuracy compared with methods using microwave data only. Using the vegetation a priori information, about 80% of the pixels present soil moisture retrieval accuracy less than 0.04 m3middotm-3in terms of root-mean-square error, whereas methods based only on the microwave data provide 63% of pixels of the studied area with this accuracy. If the error inTBis larger (2 or 3 K), the soil moisture retrieval accuracy decreases significantly for both methods. The use of optical data to give a priori value of vegetation optical option is then the best for these cases.

This paper aims at studying the quality of the sea surface salinity (SSS) retrieved from soil moisture and ocean salinity (SMOS) data in coastal areas. These areas are characterized by strong and variable SSS gradients [several practical salinity units (psu)] on relatively small scales: the extent of river plumes is highly variable, typically at kilometric and daily scales. Monitoring this variability from SMOS measurements is particularly challenging because of their resolution (typically 30-100 km) and because of the contamination by the nearby land. A set of academic tests was conducted with a linear coastline and constant geophysical parameters, and more realistic tests were conducted over the Bay of Biscay. The bias of the retrieved SSS has been analyzed, as well as the root mean square (rms) of the bias, and the retrieved SSS compared to a numerical hydrodynamic model in the semirealistic case. The academic study showed that the Blackman apodization window provides the best compromise in terms of magnitude and fluctuations of the bias of the retrieved SSS. Whatever the type of vegetation cover, a strong negative bias, greater than 1 psu, was found when nearer than 36 km from the coast. Between 44 and 80 km, the type of vegetation cover has an impact of less than a factor 2 on the bias, and no influence further than 80 km from the coast. The semirealistic study conducted in the Bay of Biscay showed a bias over ten days lower than 0.2 psu for distances greater than 47 km, due to an averaging over various geometries (coastline orientation, swath orientation, etc.). The bias showed a weak dependence on the location of the grid point within the swath. Despite the noise on the retrieved SSS, contrasts due to the plume of the Loire River and the Gironde estuary remained detectable on ten-day averaged maps with an rms of 0.57 psu. Finally, imposing thresholds on the major axis of the measurements brought little improvement to the bias, whereas it increased the rms and could lead to strong swath restriction: a 49-km threshold on the major axis resulted in an effective swath of 800-900 km instead of 1200 km.

SMOS mission will provide micro-wave soil emission data at L-band (1.4 GHz) at global scale with a half-degree spatial resolution. Inversion of model emission permits to retrieve surface soil moisture from SMOS data. These retrievals suffer from a lack of accuracy mainly because of the heterogeneity of land coverage encountered inside a given pixel. The addition of land surface parameters such as vegetation fractions coverage and surface temperature permits to overcome this problem. A feasibility study is presently undertaken with synthetic SMOS data and simulated optical satellite information. The results present significant improvements of soil moisture retrieval accuracy. A future operational scheme including these features will be of relevance for a global surface soil moisture mapping.

In the framework of the Soil Moisture and Ocean Salinity mission, a two-year (1987-1988) global simulation of brightness temperatures (TB) at L-band was performed using a simple model [L-band microwave emission of the biosphere, (L-MEB)] based on radiative transfer equations. However, the lack of alternative L-band spaceborne measurements corresponding to real-world data prevented from assessing the realism of the simulated global-scale TB fields. In this study, using a similar modeling approach, TB simulations were performed at C-band and X-band. These simulations required the development of C-MEB and X-MEB models, corresponding to the equivalent of L-MEB at C-band and X-band, respectively. These simulations were compared with Scanning Multichannel Microwave Radiometer (SMMR) measurements during the period January to August 1987 (corresponding to the end of life of the SMMR mission). A sensitivity study was also carried out to assess, at a global scale, the relative contributions of the main MEB parameters (particularly the roughness and vegetation model parameters). Regional differences between simulated and measured TBs were analyzed, discriminating possible issues either linked to the radiative transfer model (C-MEB and X-MEB) or due to land surface simulations. A global agreement between observations and simulations was discussed and allowed to evaluate regions where soil moisture retrievals would give best results. This comparison step made at C-band and X-band allowed to better assess how realistic and/or accurate the L-band simulations could be

The main objective of the SMOS (Soil Moisture and Ocean Salinity) mission over the land surfaces, is to monitor soil moisture (SM) with a frequent (3-day revisit) and global coverage (ground resolution of /spl sim/50 km). In this paper, we present some examples of the current activities aiming at developing and improving SM retrieval methods.

Using a global simulation of L-band (1.4 GHz) brightness temperature (T/sub B/) for two years (1987 and 1988), the relationship between L-band brightness temperatures and surface soil moisture was analyzed using simple regression models. The global T/sub B/ dataset describes continental pixels at a half-degree spatial resolution and accounts for within-pixel heterogeneity, based on 1-km resolution land cover maps. Two different statistical methods were investigated. First, a single regression model was obtained using a linear combination of T/sub B/ indexes. This method consisted in retrieving surface soil moisture using the same global regression model for all the pixels. Second, a regression model was calibrated over each pixel using similar linear combinations of the T/sub B/ indexes. In both cases, the influence of the radiometric noise on T/sub B/ was investigated. Applying these two methods, the capability of L-band T/sub B/ observations to monitor surface soil moisture was evaluated at the global scale and during a two-year time period. Global maps of the estimated accuracy of the soil moisture retrievals were produced. These results contribute to better define the potential of the observations from future spaceborne missions such as the Soil Moisture and Ocean Salinity (SMOS) mission.

This letter presents a synthetic L-band (1.4 GHz) multiangular brightness temperature dataset over land surfaces that was simulated at a half-degree resolution and at the global scale. The microwave emission of various land-covers (herbaceous and woody vegetation, frozen and unfrozen bare soil, snow, etc.) was computed using a simple model [L-band Microwave Emission of the Biosphere (L-MEB)] based on radiative transfer equations. The soil and vegetation characteristics needed to initialize the L-MEB model were derived from existing land-cover maps. Continuous simulations from a land-surface scheme for 1987 and 1988 provided time series of the main variables driving the L-MEB model: soil temperature at the surface and at depth, surface soil moisture, proportion of frozen surface soil moisture, and snow cover characteristics. The obtained global maps constitute a useful dataset for a first evaluation of the sensitivity of future satellite-based L-band radiometry data to soil moisture.

This paper describes the ESA-funded airborne EUROSTARRS experiment over land. A multiangle L-band radiometer was flown over a large variety of landscapes in France and Spain during the autumn of 2001. The data analysis will be performed in the framework of an ESA project to assess the feasibility of retrieving soil moisture by a future spaceborne Earth observation mission.

In preparation of the SMOS mission, synthetic L-band brightness temperatures are produced at the global scale and soil moisture retrieval algorithms are assessed.