Provider exposure fairness is crucial for sustaining a healthy content ecosystem and preventing monopolization in recommender systems. Yet, most existing methods either incorporate fairness constraints during model training, requiring expensive retraining when fairness objectives change, or rely on post-hoc reranking with fixed criteria, which lacks adaptability to diverse fairness requirements. To overcome these limitations, we propose Post-hoc Fairness Adaptation (PFA), a lightweight framework that equips a frozen recommender with a fairness adapter, enabling flexible fairness control without retraining the backbone model. Specifically, the fairness adapter learns personalized additive score adjustments from user–item embeddings, which are injected into the original ranking scores to steer provider exposure toward fairness. To train the adapter, we minimize the Kullback-Leibler (KL) divergence between the actual and the target fair exposure distributions. However, this global objective implicitly treats all providers equally, ignoring structural disparities such as imbalanced provider group sizes and heterogeneous exposure within groups. Consequently, fairness may appear satisfied at an aggregate level while severe inter-group and intra-group exposure imbalances persist, undermining practical fairness. To address this, we design Hierarchical Exposure Fairness Alignment (HEFA), which explicitly balances inter- and intra-group provider exposure disparities, enabling flexible adaptation to diverse fairness requirements. To mitigate potential accuracy degradation, PFA jointly optimizes HEFA with a differentiable NDCG loss, enabling end-to-end fairness optimization while preserving ranking quality. Extensive experiments on three public datasets demonstrate that PFA achieves substantial fairness gains with negligible accuracy loss, consistently outperforming strong baselines. Code is available at https://github.com/Tam-JQK/Post-train.

Multi-behavior recommendation faces a critical challenge in practice: auxiliary behaviors (e.g., clicks, carts) are often noisy, weakly correlated, or semantically misaligned with the target behavior (e.g., purchase), which leads to biased preference learning and suboptimal performance. While existing methods attempt to fuse these heterogeneous signals, they inherently lack a principled mechanism to ensure robustness against such behavioral inconsistency. In this work, we propose Robust Multi-Behavior Recommendation towards Target Behaviors (RMBRec), a robust multi-behavior recommendation framework grounded in an information-theoretic robustness principle. We interpret robustness as a joint process of maximizing predictive information while minimizing its variance across heterogeneous behavioral environments. Under this perspective, the Representation Robustness Module (RRM) enhances local semantic consistency by maximizing the mutual information between users' auxiliary and target representations, whereas the Optimization Robustness Module (ORM) enforces global stability by minimizing the variance of predictive risks across behaviors, which is an efficient approximation to invariant risk minimization. This local-global collaboration bridges representation purification and optimization invariance in a theoretically coherent way. Extensive experiments on three real-world datasets demonstrate that RMBRec not only outperforms state-of-the-art methods in accuracy but also maintains remarkable stability under various noise perturbations. For reproducibility, our code is available at https://github.com/miaomiao-cai2/RMBRec/.

Personalized news recommendation is highly time-sensitive, as user interests are often driven by emerging events, trending topics, and shifting real-world contexts. These dynamics make it essential to model not only users' long-term preferences, which reflect stable reading habits and high-order collaborative patterns, but also their short-term, context-dependent interests that change rapidly over time. However, most existing approaches rely on a single static interaction graph, which struggles to capture both long-term preference patterns and short-term interest changes as user behavior evolves. To address this challenge, we propose a unified framework that learns user preferences from both global and local temporal perspectives. A global preference modeling component captures long-term collaborative signals from the overall interaction graph, while a local preference modeling component partitions historical interactions into stage-wise temporal subgraphs to represent short-term dynamics. Within this module, an LSTM branch models the progressive evolution of recent interests, and a self-attention branch captures long-range temporal dependencies. Extensive experiments on two large-scale real-world datasets show that our approach consistently outperforms strong baselines and delivers fresher and more relevant recommendations across diverse user behaviors and temporal settings.

Popularity bias is a common challenge in recommender systems. It often causes unbalanced item recommendation performance and intensifies the Matthew effect. Due to limited user-item interactions, unpopular items are frequently constrained to the embedding neighborhoods of only a few users, leading to representation collapse and weakening the model's generalization. Although existing supervised alignment and reweighting methods can help mitigate this problem, they still face two major limitations: (1) they overlook the inherent variability among different Graph Convolutional Networks(GCNs) layers, which can result in negative gains in deeper layers; (2) they rely heavily on fixed hyperparameters to balance popular and unpopular items, limiting adaptability to diverse data distributions and increasing model complexity. To address these challenges, we proposeGraph-StructuredDualAdaptation Framework (GSDA), a dual adaptive framework for mitigating popularity bias in recommendation. Our theoretical analysis shows that supervised alignment in GCNs is hindered by the over-smoothing effect, where the distinction between popular and unpopular items diminishes as layers deepen, reducing the effectiveness of alignment at deeper levels. To overcome this limitation,GSDAintegrates a hierarchical adaptive alignment mechanism that counteracts entropy decay across layers together with a distribution-aware contrastive weighting strategy based on the Gini coefficient, enabling the model to adapt its debiasing strength dynamically without relying on fixed hyperparameters. Extensive experiments on three benchmark datasets demonstrate thatGSDAeffectively alleviates popularity bias while consistently outperforming state-of-the-art methods in recommendation performance. The source code for our method is available athttps://github.com/miaomiao-cai2/GSDA.

Traditional recommendation methods, which typically focus on modeling a single user behavior (e.g., purchase), often face severe data sparsity issues. Multi-behavior recommendation methods offer a promising solution by leveraging user data from diverse behaviors. However, most existing approaches entangle multiple behavioral factors, learning holistic but imprecise representations that fail to capture specific user intents. To address this issue, we propose a multi-behavior method by modeling latent factors with an expert network (MBLFE). In our approach, we design a gating expert network, where the expert network models all latent factors within the entire recommendation scenario, with each expert specializing in a specific latent factor. The gating network dynamically selects the optimal combination of experts for each user, enabling a more accurate representation of user preferences. To ensure independence among experts and factor consistency of a particular expert, we incorporate self-supervised learning during the training process. Furthermore, we enrich embeddings with multi-behavior data to provide the expert network with more comprehensive collaborative information for factor extraction. Extensive experiments on three real-world datasets demonstrate that our method significantly outperforms state-of-the-art baselines, validating its effectiveness.

Recommendation systems harness user–item interactions like clicks and reviews to learn their representations. Previous studies improve recommendation accuracy and interpretability by modeling user preferences across various aspects and intents. However, the aspects and intents are inferred directly from user reviews or behavior patterns, suffering from the data noise and the data sparsity problem. Furthermore, it is difficult to understand the reasons behind recommendations due to the challenges of interpreting implicit aspects and intents. To address these constraints, we harness the sentiment analysis capabilities of Large Language Models (LLMs) to enhance the accuracy and interpretability of the conventional recommendation methods. Specifically, inspired by the deep semantic understanding offered by LLMs, we introduce a chain-based prompting strategy to uncover semantic aspect-aware interactions, which provide clearer insights into user behaviors at a fine-grained semantic level. To incorporate the rich interactions of various aspects, we propose the simple yet effective Semantic Aspect-Based Graph Convolution Network (SAGCN). By performing graph convolutions on multiple semantic aspect graphs, SAGCN efficiently combines embeddings across multiple semantic aspects for final user and item representations. The effectiveness of the SAGCN was evaluated on four publicly available datasets through extensive experiments, which revealed that it outperforms all other competitors. Furthermore, interpretability analysis experiments were conducted to demonstrate the interpretability of incorporating semantic aspects into the model.

In the evolving landscape of recommender systems, the challenge of effectively conducting privacy-preserving Cross-domain Recommendation, especially under strict non-overlapping constraints, has emerged as a key focus. Despite extensive research has made significant progress, several limitations still exist: (1) Previous semantic-based methods fail to deeply exploit rich textual information, since they quantize the text into codes, losing its original rich semantics. (2) The current solution solely relies on the text-modality, while the synergistic effects with the ID-modality are ignored. (3) Existing studies do not consider the impact of irrelevant semantic features, leading to inaccurate semantic representation. To address these challenges, we introduce federated semantic learning and devise FFMSR as our solution. For Limitation 1, we locally learn items’ semantic encodings from their original texts by a multi-layer semantic encoder and then cluster them on the server to facilitate the transfer of semantic knowledge between domains. To tackle Limitation 2, we integrate both ID and Text modalities on the clients, and utilize them to learn different aspects of items. To handle Limitation 3, a Fast Fourier Transform-based filter and a gating mechanism are developed to alleviate the impact of irrelevant semantic information in the local model. We conduct extensive experiments on two real-world datasets, and the results demonstrate the superiority of our FFMSR method over other SOTA methods. Our source codes are publicly available at https://github.com/Sapphire-star/FFMSR .

In multi-behavior recommendation scenarios, analyzing users’ diverse behaviors, such as click , purchase , and rating , enables a more comprehensive understanding of their interests, facilitating personalized and accurate recommendations. A fundamental assumption of multi-behavior recommendation methods is the existence of shared user preferences across behaviors, representing users’ intrinsic interests. Based on this assumption, existing approaches aim to integrate information from various behaviors to enrich user representations. However, they often overlook the presence of both commonalities and individualities in users’ multi-behavior preferences. These individualities reflect distinct aspects of preferences captured by different behaviors, where certain auxiliary behaviors may introduce noise, hindering the prediction of the target behavior. To address this issue, we propose a user invariant preference learning (UIPL) for multi-behavior recommendation, aiming to capture users’ intrinsic interests (referred to as invariant preferences) from multi-behavior interactions to mitigate the introduction of noise. Specifically, UIPL leverages the paradigm of invariant risk minimization to learn invariant preferences. To implement this, we employ a variational autoencoder (VAE) to extract users’ invariant preferences, replacing the standard reconstruction loss with an invariant risk minimization constraint. Additionally, we construct distinct environments by combining multi-behavior data to enhance robustness in learning these preferences. Finally, the learned invariant preferences are used to provide recommendations for the target behavior. Extensive experiments on four real-world datasets demonstrate that UIPL significantly outperforms current state-of-the-art methods.

Multi-behavior recommendation systems enhance effectiveness by leveraging auxiliary behaviors (such as page views and favorites) to address the limitations of traditional models that depend solely on sparse target behaviors like purchases. Existing approaches to multi-behavior recommendations typically follow one of two strategies: some derive initial node representations from individual behavior subgraphs before integrating them for a comprehensive profile, while others interpret multi-behavior data as a heterogeneous graph, applying graph neural networks to achieve a unified node representation. However, these methods do not adequately explore the intricate patterns of behavior among users and items. To bridge this gap, we introduce a novel algorithm called Behavior Pattern mining-based Multi-behavior Recommendation (BPMR). Our method extensively investigates the diverse interaction patterns between users and items, utilizing these patterns as features for making recommendations. We employ a Bayesian approach to streamline the recommendation process, effectively circumventing the challenges posed by graph neural network algorithms, such as the inability to accurately capture user preferences due to over-smoothing. Our experimental evaluation on three realworld datasets demonstrates that BPMR significantly outperforms existing state-of-the-art algorithms, showing an average improvement of 268.29% in Recall@10 and 248.02% in NDCG@10 metrics. The code of our BPMR is openly accessible for use and further research at https://github.com/rookitkitlee/BPMR.

In recommender systems, multi-behavior methods have demonstrated their effectiveness in mitigating issues like data sparsity, a common challenge in traditional single-behavior recommendation approaches. These methods typically infer user preferences from various auxiliary behaviors and apply them to the target behavior for recommendations. However, this direct transfer can introduce noise to the target behavior in recommendation, due to variations in user attention across different behaviors. To address this issue, this paper introduces a novel approach, Behavior-Contextualized Item Preference Modeling (BCIPM), for multi-behavior recommendation. Our proposed Behavior-Contextualized Item Preference Network discerns and learns users' specific item preferences within each behavior. It then considers only those preferences relevant to the target behavior for final recommendations, significantly reducing noise from auxiliary behaviors. These auxiliary behaviors are utilized solely for training the network parameters, thereby refining the learning process without compromising the accuracy of the target behavior recommendations. To further enhance the effectiveness of BCIPM, we adopt a strategy of pre-training the initial embeddings. This step is crucial for enriching the item-aware preferences, particularly in scenarios where data related to the target behavior is sparse. Comprehensive experiments conducted on four real-world datasets demonstrate BCIPM's superior performance compared to several leading state-of-the-art models, validating the robustness and efficiency of our proposed approach.

Unsupervised Non-overlapping Cross-domain Recommendation (UNCR) is the task that recommends source domain items to the target domain users, which is more challenging as the users are non-overlapped, and its learning process is unsupervised. Unsupervised Non-overlapping Cross-domain Recommendation UNCR is still unsolved due to the following: (1) Previous studies need extra auxiliary information to learn transferable features when aligning two domains, which is unrealistic and hard to obtain due to privacy concerns. (2) Since the adoption of the shared network, existing works cannot well eliminate the domain-specific features in the common feature space, which may incorporate domain noise and harm the cross-domain recommendation. In this work, we propose a domain adaption-based method, namely DA-DAN, to address the above challenges. Specifically, to let DA-DAN be free of auxiliary information, we learn users’ preferences by only exploring their sequential patterns, and propose an improved self-attention layer to model them. To well eliminate the domain-specific features from the common feature space, we resort to a dual generative adversarial network with a multi-target adversarial loss, where two generators and discriminators are leveraged to model each domain separately. Experimental results on three real-world datasets demonstrate the advantage of DA-DAN compared with the state-of-the-art recommendation baselines. Moreover, our source codes have been publicly released. 1

Graph Convolution Networks (GCNs) have significantly succeeded in learning user and item representations for recommendation systems. The core of their efficacy is the ability to explicitly exploit the collaborative signals from both the first- and high-order neighboring nodes. However, most existing GCN-based methods overlook the multiple interests of users while performing high-order graph convolution. Thus, the noisy information from unreliable neighbor nodes (e.g., users with dissimilar interests) negatively impacts the representation learning of the target node. Additionally, conducting graph convolution operations without differentiating high-order neighbors suffers the over-smoothing issue when stacking more layers, resulting in performance degradation. In this article, we aim to capture more valuable information from high-order neighboring nodes while avoiding noise for better representation learning of the target node. To achieve this goal, we propose a novel GCN-based recommendation model, termed Cluster-based Graph Collaborative Filtering (ClusterGCF). This model performs high-order graph convolution on cluster-specific graphs, which are constructed by capturing the multiple interests of users and identifying the common interests among them. Specifically, we design an unsupervised and optimizable soft node clustering approach to classify user and item nodes into multiple clusters. Based on the soft node clustering results and the topology of the user–item interaction graph, we assign the nodes with probabilities for different clusters to construct the cluster-specific graphs. To evaluate the effectiveness of ClusterGCF, we conducted extensive experiments on four publicly available datasets. Experimental results demonstrate that our model can significantly improve recommendation performance.

Multi-behavior recommendation exploits multiple types of user-item interactions, such as view and cart , to learn user preferences and has demonstrated to be an effective solution to alleviate the data sparsity problem faced by the traditional models that often utilize only one type of interaction for recommendation. In real scenarios, users often take a sequence of actions to interact with an item, in order to get more information about the item and thus accurately evaluate whether an item fits their personal preferences. Those interaction behaviors often obey a certain order, and more importantly, different behaviors reveal different information or aspects of user preferences towards the target item. Most existing multi-behavior recommendation methods take the strategy to first extract information from different behaviors separately and then fuse them for final prediction. However, they have not exploited the connections between different behaviors to learn user preferences. Besides, they often introduce complex model structures and more parameters to model multiple behaviors, largely increasing the space and time complexity. In this work, we propose a lightweight multi-behavior recommendation model named Cascading Residual Graph Convolutional Network ( CRGCN for short) for multi-behavior recommendation, which can explicitly exploit the connections between different behaviors into the embedding learning process without introducing any additional parameters (with comparison to the single-behavior based recommendation model). In particular, we design a cascading residual graph convolutional network (GCN) structure, which enables our model to learn user preferences by continuously refining the embeddings across different types of behaviors. The multi-task learning method is adopted to jointly optimize our model based on different behaviors. Extensive experimental results on three real-world benchmark datasets show that CRGCN can substantially outperform the state-of-the-art methods, achieving 24.76%, 27.28%, and 25.10% relative gains on average in terms of HR@K (K = {10,20,50,80}) over the best baseline across the three datasets. Further studies also analyze the effects of leveraging multi-behaviors in different numbers and orders on the final performance.

Multi-behavioral recommender systems have emerged as a solution to address data sparsity and cold-start issues by incorporating auxiliary behaviors alongside target behaviors. However, existing models struggle to accurately capture varying user preferences across different behaviors and fail to account for diverse item preferences within behaviors. Various user preference factors (such as price or quality) entangled in the behavior may lead to sub-optimization problems. Furthermore, these models overlook the personalized nature of user behavioral preferences by employing uniform transformation networks for all users and items. To tackle these challenges, we propose the Disentangled Cascaded Graph Convolutional Network (Disen-CGCN), a novel multi-behavior recommendation model. Disen-CGCN employs disentangled representation techniques to effectively separate factors within user and item representations, ensuring their independence. In addition, it incorporates a multi-behavioral meta-network, enabling personalized feature transformation across user and item behaviors. Furthermore, an attention mechanism captures user preferences for different item factors within each behavior. By leveraging attention weights, we aggregate user and item embeddings separately for each behavior, computing preference scores that predict overall user preferences for items. Our evaluation of benchmark datasets demonstrates the superiority of Disen-CGCN over state-of-the-art models, showcasing an average performance improvement of 7.07% and 9.00% on respective datasets. These results highlight Disen-CGCN’s ability to effectively leverage multi-behavioral data, leading to more accurate recommendations.

Factorization Machines (FMs) have been proven effective in modeling the second-order interactions between attributes. Nevertheless, existing methods often fall short of learning the complex and rich intra-attribute feature interactions, which are abundantly exhibited in real-world recommendation data. To address this problem, we propose an FM framework equipped with generalized metric learning to better handle the essential feature correlations. In particular, based on this framework, we present a Mahalanobis distance and a deep neural network method, which can effectively model the linear and non-linear correlations between features, respectively. Besides, we design an efficient approach for simplifying the model functions. Experiments on several benchmark datasets demonstrate that our proposed framework outperforms several state-of-the-art baselines by a significant margin.

Multi-behavior recommendation, which exploits auxiliary behaviors (e.g., click and cart) to help predict users’ potential interactions on the target behavior (e.g., buy), is regarded as an effective way to alleviate the data sparsity or cold-start issues in recommendation. Multi-behaviors are often taken in certain orders in real-world applications (e.g., click>cart>buy). In a behavior chain, a latter behavior usually exhibits a stronger signal of user preference than the former one does. Most existing multi-behavior models fail to capture such dependencies in a behavior chain for embedding learning. In this work, we propose a novel multi-behavior recommendation model with cascading graph convolution networks (named MB-CGCN). In MB-CGCN, the embeddings learned from one behavior are used as the input features for the next behavior’s embedding learning after a feature transformation operation. In this way, our model explicitly utilizes the behavior dependencies in embedding learning. Experiments on two benchmark datasets demonstrate the effectiveness of our model on exploiting multi-behavior data. It outperforms the best baseline by 33.7% and 35.9% on average over the two datasets in terms of Recall@10 and NDCG@10, respectively.

Unsupervised multi-view feature selection aims to select informative features with multi-view features and unsupervised learning. It is a challenging problem due to the absence of explicit semantic supervision. Recently, graph theory and hard pseudo-label learning have been adopted to solve multi-view feature selection problems under the unsupervised learning paradigm. However, graph-based methods are difficult to support large-scale real scenarios due to the high computational complexity of graph construction. Moreover, existing methods based on hard pseudo-label learning generally result in significant information loss. In this article, we propose an Adaptive Collaborative Soft Label Learning (ACSLL) model for unsupervised multi-view feature selection. In this model, collaborative soft label learning and multi-view feature selection are integrated into a unified framework. Specifically, we learn the pseudo soft labels from each view feature by a simple and efficient method and fuse them with an adaptive weighting strategy into a joint soft label matrix. This matrix is further used for guiding the feature selection process to identify valuable features. An effective optimization strategy guaranteed with proven convergence is derived to iteratively solve this problem. Experiments demonstrate the superiority of the proposed method in both feature selection accuracy and efficiency.

Abstract - Finding tampered regions in images is a common research topic in machine learning and computer vision. Although many image manipulation location algorithms have been proposed, most of them only focus on RGB images with different color spaces, and the frequency information that contains the potential tampering clues is often ignored. Moreover, among the manipulation operations, splicing and copy-move are two frequently used methods, but as their characteristics are quite different, specific methods have been individually designed for detecting the operations of either splicing or copy-move, and it is very difficult to widely apply these methods in practice. To solve these issues, in this work, a novel end-to-end two-stream boundary-aware network (abbreviated as TBNet) is proposed for generic image manipulation localization where the RGB stream, the frequency stream, and the boundary artifact location are explored in a unified framework. Specifically, we first design an adaptive frequency selection module (AFS) to adaptively select the appropriate frequency to mine inconsistent statistics and eliminate the interference of redundant statistics. Then, an adaptive cross-attention fusion module (ACF) is proposed to adaptively fuse the RGB feature and the frequency feature. Finally, the boundary artifact location network (BAL) is designed to locate the boundary artifacts for which the parameters are jointly updated by the outputs of the ACF, and its results are further fed into the decoder. Thus, the parameters of the RGB stream, the frequency stream, and the boundary artifact location network are jointly optimized, and their latent complementary relationships are fully mined. The results of the extensive experiments performed on six public benchmarks of the image manipulation localization task, namely, CASIA1.0, COVER, Carvalho, In-The-Wild, NIST-16, and IMD-2020, demonstrate that the proposed TBNet can substantially outperform state-of-the-art generic image manipulation localization methods in terms of MCC, F1, and AUC while maintaining robustness with respect to various attacks. Compared with DeepLabV3+ on the CASIA1.0, COVER, Carvalho, In-The-Wild, and NIST-16 datasets, the improvements in MCC/F1 reach 11%/11.1%, 8.2%/10.3%, 10.2%/11.6%, 8.9%/6.2%, and 13.3%/16.0%, respectively. Moreover, when IMD2020 is utilized, its AUC improvement can achieve 14.7%.

Session-based recommendation (SBR) has drawn increasingly research attention in recent years, due to its great practical value by only exploiting the limited user behavior history in the current session. The key of SBR is to accurately infer the anonymous user purpose in a session which is typically represented as session embedding, and then match it with the item embeddings for the next item prediction. Existing methods typically learn the session embedding at the item level, namely, aggregating the embeddings of items with or without assigned attention weights to items. However, they ignore the fact that a user's intent on adopting an item is driven by certain factors of the item (e.g., theleading actorsof an movie). In other words, they have not explored finer-granularity interests of users at the factor level to generate the session embedding, leading to sub-optimal performance. To address the problem, we propose a novel method called Disentangled Graph Neural Network (Disen-GNN) to capture the session purpose with the consideration of factor-level attention on each item. Specifically, we first employ the disentangled learning technique to cast item embeddings into the embeddings of multiple factors, and then use the gated graph neural network (GGNN) to learn the embedding factor-wisely based on the item adjacent similarity matrix computed for each factor. Moreover, the distance correlation is adopted to enhance the independence between each pair of factors. After representing each item with independent factors, an attention mechanism is designed to learn user intent to different factors of each item in the session. The session embedding is then generated by aggregating the item embeddings with attention weights of each item's factors. To this end, our model takes user intents at the factor level into account to infer the user purpose in a session. Extensive experiments on three benchmark datasets demonstrate the superiority of our method over existing methods.

Semi-supervised feature selection methods jointly exploit the labelled and unlabeled samples when selecting the features. Under the semi-supervised learning scenario, the number of labelled data significantly impacts the feature selection performance. In this paper, we introduce the label learning with binary hashing to the research field of feature selection and propose a novel Semi-supervised Feature Selection with Binary Label Learning (SFS-BLL) model. Specifically, we learn the binary hash codes as the pseudo labels by specially imposing binary hash constraints on the spectral embedding process to increase the number of labels. Meanwhile, we propose a self-weighted sparse regression module which exploits the learned labels and given manual labels together with importance differentiation to guide the feature selection process. Finally, we develop an effective discrete optimization method based on the Alternating Direction Method of Multipliers (ADMM) to iteratively optimize the binary labels and the feature selection matrix. Extensive experiments on widely tested benchmarks demonstrate the superiority of the proposed method from various aspects.

In the context of COVID-19, numerous people present their opinions through social networks. It is thus highly desired to conduct sentiment analysis towards COVID-19 tweets to learn the public's attitudes, and facilitate the government to make proper guidelines for avoiding the social unrest. Although many efforts have studied the text-based sentiment classification from various domains (e.g., delivery and shopping reviews), it is hard to directly use these classifiers for the sentiment analysis towards COVID-19 tweets due to the domain gap. In fact, developing the sentiment classifier for COVID-19 tweets is mainly challenged by the limited annotated training dataset, as well as the diverse and informal expressions of user-generated posts. To address these challenges, we construct a large-scale COVID-19 dataset from Weibo and propose a dual COnsistency-enhanced semi-superVIseD network for Sentiment Anlaysis (COVID-SA). In particular, we first introduce a knowledge-based augmentation method to augment data and enhance the model's robustness. We then employ BERT as the text encoder backbone for both labeled data, unlabeled data, and augmented data. Moreover, we propose a dual consistency (i.e., label-oriented consistency and instance-oriented consistency) regularization to promote the model performance. Extensive experiments on our self-constructed dataset and three public datasets show the superiority of COVID-SA over state-of-the-art baselines on various applications.

Hashing is an effective technique to improve the efficiency of large-scale recommender system by representing both users and items into binary codes. However, existing hashing-based recommendation methods still suffer from two important problems: 1) Cold-start. They employ the user-item interactions and single auxiliary information to learn the binary hash codes. But the full interaction history is not always available and the single auxiliary information may be missing. 2) Efficient optimization. They learn the hash codes with two-step relaxed optimization or one-step discrete hash optimization based on the cyclic coordinate descent, which results in significant quantization loss or still consumes considerable computation time. In this paper, we propose a Multi-modal Discrete Collaborative Filtering (MDCF) for efficient cold-start recommendation. We map the multi-modal features of users and items to a consensus Hamming space based on the matrix factorization framework. Specifically, a low-rank self-weighted multi-modal fusion module is designed to adaptively fuse the multi-modal features into binary hash codes. Additionally, to support large-scale recommendation, a fast discrete optimization method based on augmented Lagrangian multiplier is developed to directly compute the binary hash codes with simple operations. Experiments show the superior performance of the proposed method over state-of-the-art baselines.

Using hashing to learn the binary codes of users and items significantly improves the efficiency and reduces the space consumption of the recommender system. However, existing hashing-based recommender systems remain black boxes without any explainable outputs that illustrate why the system recommends the items. In this paper, we present a new end-to-end discrete recommendation framework based on the multi-task learning to simultaneously perform explainable and efficient recommendation. Toward this goal, an Explainable Discrete Collaborative Filtering (EDCF) method is proposed to preserve the user-item interaction features and semantic text features into binary hash codes by adaptively exploiting the correlations between the preference prediction task and the explanation generation task. At the online recommendation stage, EDCF makes efficient top-K recommendation by calculating the Hamming distances between the feature hash codes, and simultaneously generates natural language explanations for recommendation results through the explanation generation module. To obtain the hash codes directly from the end-to-end neural network, we introduce an attentive TextCNN and an Adaptive Tanh layer in the preference prediction task. For explanation generation, Long Short-Term Memory is employed to generate the explanations for recommendation results from the binary hash codes of user and item. Experiments demonstrate the superiority of the proposed method.

Recommendation systems make predictions chiefly based on users' historical interaction data (e.g., items previously clicked or purchased). There is a risk of privacy leakage when collecting the users' behavior data for building the recommendation model. However, existing privacy-preserving solutions are designed for tackling the privacy issue only during the model training [32] and results collection [40] phases. The problem of privacy leakage still exists when directly sharing the private user interaction data with organizations or releasing them to the public. To address this problem, in this paper, we present a User Privacy Controllable Synthetic Data Generation model (short for UPC-SDG), which generates synthetic interaction data for users based on their privacy preferences. The generation model aims to provide certain privacy guarantees while maximizing the utility of the generated synthetic data at both data level and item level. Specifically, at the data level, we design a selection module that selects those items that contribute less to a user's preferences from the user's interaction data. At the item level, a synthetic data generation module is proposed to generate a synthetic item corresponding to the selected item based on the user's preferences. Furthermore, we also present a privacy-utility trade-off strategy to balance the privacy and utility of the synthetic data. Extensive experiments and ablation studies have been conducted on three publicly accessible datasets to justify our method, demonstrating its effectiveness in generating synthetic data under users' privacy preferences.

Multi-modal hashing learns binary hash codes with extremely low storage cost and high retrieval speed. It can support efficient multi-modal retrieval well. However, most existing methods still suffer from three important problems: 1) Limited semantic representation capability with shallow learning. 2) Mandatory feature-level multi-modal fusion ignores heterogeneous multi-modal semantic gaps. 3) Direct coarse pairwise semantic preserving cannot effectively capture the fine-grained semantic correlations. For solving these problems, in this paper, we propose a Bit-aware Semantic Transformer Hashing (BSTH) framework to excavate bit-wise semantic concepts and simultaneously align the heterogeneous modalities for multi-modal hash learning on the concept-level. Specifically, the bit-wise implicit semantic concepts are learned with the transformer in a self-attention manner, which can achieve implicit semantic alignment on the fine-grained concept-level and reduce the heterogeneous modality gaps. Then, the concept-level multi-modal fusion is performed to enhance the semantic representation capability of each implicit concept and the fused concept representations are further encoded to the corresponding hash bits via bit-wise hash functions. Further, to supervise the bit-aware transformer module, a label prototype learning module is developed to learn prototype embeddings for all categories that capture the explicit semantic correlations on the category-level by considering the co-occurrence priors. Experiments on three widely tested multi-modal retrieval datasets demonstrate the superiority of the proposed method from various aspects.

Factorization Machines (FMs) are effective in incorporating side information to overcome the cold-start and data sparsity problems in recommender systems. Traditional FMs adopt the inner product to model the second-order interactions between different attributes, which are represented via feature vectors. The problem is that the inner product violates the triangle inequality property of feature vectors. As a result, it cannot well capture fine-grained attribute interactions, resulting in sub-optimal performance. Recently, the euclidean distance is exploited in FMs to replace the inner product and has delivered better performance. However, previous FM methods including the ones equipped with the euclidean distance all focus on the attribute-level interaction modeling, ignoring the critical intrinsic feature correlations inside attributes. Thereby, they fail to model the complex and rich interactions exhibited in the real-world data. To tackle this problem, in this paper, we propose a FM framework equipped with generalized metric learning techniques to better capture these feature correlations. In particular, based on this framework, we present a Mahalanobis distance and a deep neural network (DNN) methods, which can effectively model the linear and non-linear correlations between features, respectively. Besides, we design an efficient approach for simplifying the model functions. Experiments on several benchmark datasets demonstrate that our proposed framework outperforms several state-of-the-art baselines by a large margin. Moreover, we collect a new large-scale dataset on second-hand trading to justify the effectiveness of our method over cold-start and data sparsity problems in recommender systems.

As important side information, attributes have been widely exploited in the existing recommender system for better performance. However, in the real-world scenarios, it is common that some attributes of items/users are missing (e.g., some movies miss the genre data). Prior studies usually use a default value (i.e., “other”) to represent the missing attribute, resulting in sub-optimal performance. To address this problem, in this paper, we present an attribute-aware attentive graph convolution network (A${^2}$-GCN). In particular, we first construct a graph, where users, items, and attributes are three types of nodes and their associations are edges. Thereafter, we leverage the graph convolution network to characterize the complicated interactions among$<$users, items, attributes$>$. Furthermore, to learn the node representation, we adopt the message-passing strategy to aggregate the messages passed from the other directly linked types of nodes (e.g., a user or an attribute). Towards this end, we are capable of incorporating associate attributes to strengthen the user and item representation learning, and thus naturally solve the attribute missing problem. Given that for different users, the attributes of an item have different influence on their preference to this item, we design a novel attention mechanism to filter the message passed from an item to a target user by considering the attribute information. Extensive experiments have been conducted on several publicly accessible datasets to justify our model, demonstrating that our model outperforms several state-of-the-art methods and demonstrate the effectiveness of our attention method.

Multi-modal hashing supports efficient multimedia retrieval well. However, existing methods still suffer from two problems: (1) Fixed multi-modal fusion. They collaborate the multi-modal features with fixed weights for hash learning, which cannot adaptively capture the variations of online streaming multimedia contents. (2) Binary optimization challenge. To generate binary hash codes, existing methods adopt either two-step relaxed optimization that causes significant quantization errors or direct discrete optimization that consumes considerable computation and storage cost. To address these problems, we first propose a Supervised Multi-modal Hashing with Online Query-adaption method. A self-weighted fusion strategy is designed to adaptively preserve the multi-modal features into hash codes by exploiting their complementarity. Besides, the hash codes are efficiently learned with the supervision of pair-wise semantic labels to enhance their discriminative capability while avoiding the challenging symmetric similarity matrix factorization. Further, we propose an efficient Unsupervised Multi-modal Hashing with Online Query-adaption method with an adaptive multi-modal quantization strategy. The hash codes are directly learned without the reliance on the specific objective formulations. Finally, in both methods, we design a parameter-free online hashing module to adaptively capture query variations at the online retrieval stage. Experiments validate the superiority of our proposed methods.

Item-based collaborative filtering (ICF) enjoys the advantages of high recommendation accuracy and ease in online penalization and thus is favored by the industrial recommender systems. ICF recommends items to a target user based on their similarities to the previously interacted items of the user. Great progresses have been achieved for ICF in recent years by applying advanced machine learning techniques (e.g., deep neural networks) to learn the item similarity from data. The early methods simply treat all the historical items equally and recently proposed methods attempt to distinguish the different importance of historical items when recommending a target item. Despite the progress, we argue that those ICF models neglect the diverse intents of users on adopting items (e.g., watching a movie because of the director, leading actors, or the visual effects). As a result, they fail to estimate the item similarity on a finer-grained level to predict the user’s preference to an item, resulting in sub-optimal recommendation. In this work, we propose a general feature-level attention method for ICF models. The key of our method is to distinguish the importance of different factors when computing the item similarity for a prediction. To demonstrate the effectiveness of our method, we design a light attention neural network to integrate both item-level and feature-level attention for neural ICF models. It is model-agnostic and easy-to-implement. We apply it to two baseline ICF models and evaluate its effectiveness on six public datasets. Extensive experiments show the feature-level attention enhanced models consistently outperform their counterparts, demonstrating the potential of differentiating user intents on the feature-level for ICF recommendation models.

Listwise collaborative filtering, which directly predicts a ranking list of items for the given user, achieves superior accuracy performance since it is aligned with the ultimate goals of recommender systems.However, in corpus with the enormous number of items, the calculation cost for the learnt model to predict all user-item preferences is tremendous, which makes full corpus retrieval extremely difficult.In this paper, we propose a binarized collaborative filtering method, called Discrete Listwise Collaborative Filtering (DLCF), to represent users and items as binary codes for fast recommendation.As such, the proposed method could accelerate the retrieval procedure, since the user-item similarity could be efficiently computed via Hamming distance.We further adopt the discrete coordinate descent method to jointly optimize our proposed model.Extensive experiments performed on three real-world datasets demonstrate that 1) DLCF significantly outperforms the state-of-the-art binarized recommendation methods, and 2) DLCF shows very competitive ranking accuracy compared to its real-valued version while significantly improving the retrieval efficiency.

The recommender systems, which merely leverage user-item interactions for user preference prediction (such as the collaborative filtering-based ones), often face dramatic performance degradation when the interactions of users or items are insufficient. In recent years, various types of side information have been explored to alleviate this problem. Among them, knowledge graph (KG) has attracted extensive research interests as it can encode users/items and their associated attributes in the graph structure to preserve the relation information. In contrast, less attention has been paid to the item-item co-occurrence information (i.e., co-view), which contains rich item-item similarity information. It provides information from a perspective different from the user/item-attribute graph and is also valuable for the CF recommendation models. In this work, we make an effort to study the potential of integrating both types of side information (i.e., KG and item-item co-occurrence data) for recommendation. To achieve the goal, we propose a unified graph-based recommendation model (UGRec), which integrates the traditional directed relations in KG and the undirected item-item co-occurrence relations simultaneously. In particular, for a directed relation, we transform the head and tail entities into the corresponding relation space to model their relation; and for an undirected co-occurrence relation, we project head and tail entities into a unique hyperplane in the entity space to minimize their distance. In addition, a head-tail relation-aware attentive mechanism is designed for fine-grained relation modeling.

Graph Convolution Networks (GCNs) manifest great potential in recommendation. This is attributed to their capability on learning good user and item embeddings by exploiting the collaborative signals from the high-order neighbors. Like other GCN models, the GCN based recommendation models also suffer from the notorious over-smoothing problem – when stacking more layers, node embeddings become more similar and eventually indistinguishable, resulted in performance degradation. The recently proposed LightGCN and LR-GCN alleviate this problem to some extent, however, we argue that they overlook an important factor for the over-smoothing problem in recommendation, that is, high-order neighboring users with no common interests of a user can be also involved in the user’s embedding learning in the graph convolution operation. As a result, the multi-layer graph convolution will make users with dissimilar interests have similar embeddings. In this paper, we propose a novel Interest-aware Message-Passing GCN (IMP-GCN) recommendation model, which performs high-order graph convolution inside subgraphs. The subgraph consists of users with similar interests and their interacted items. To form the subgraphs, we design an unsupervised subgraph generation module, which can effectively identify users with common interests by exploiting both user feature and graph structure. To this end, our model can avoid propagating negative information from high-order neighbors into embedding learning. Experimental results on three large-scale benchmark datasets show that our model can gain performance improvement by stacking more layers and outperform the state-of-the-art GCN-based recommendation models significantly.

Localizing the desired video clip for a given query in an untrimmed video has been a hot research topic for multimedia understanding. Recently, a new task named video relocalization, in which the query is a video clip, has been raised. Some methods have been developed for this task, however, these methods often require dense annotations of the temporal boundaries inside long videos for training. A more practical solution is the weakly-supervised approach, which only needs the matching information between the query and video.

View-based 3D model retrieval has become an important task in both computer vision and machine learning domains. Although deep learning methods have achieved excellent performances on view-based 3D model retrieval, the intrinsic correlation and the degree of view discrimination among multiple views in a 3D model have not been effectively exploited. To obtain a more efficient feature descriptor for 3D model retrieval, in this work, we propose the pairwise view weighted graph network (abbreviated PVWGN) for view-based 3D model retrieval where non-local graph layers are embedded into the network architecture to automatically mine the intrinsic relationship among multiple views of a 3D model. Furthermore, the view weighted layer is employed in the PVWGN to adaptively assign the weight to each view according to its aggregation information. In addition, the pairwise discrimination loss function is designed to improve the feature discrimination of the 3D model. Most importantly, these three issues are integrated into a unified framework. Extensive experimental results on the ModelNet40 and ModelNet10 3D model retrieval datasets show that PVWGN can outperform all state-of-the-art methods on the 3D model retrieval task with mAPs of 93.2% and 96.2%, respectively.

Multi-modal hashing methods could support efficient multimedia retrieval by combining multi-modal features for binary hash learning at the both offline training and online query stages. However, existing multi-modal methods cannot binarize the queries, when only one or part of modalities are provided. In this article, we propose a novel Flexible Multi-modal Hashing (FMH) method to address this problem. FMH learns multiple modality-specific hash codes and multi-modal collaborative hash codes simultaneously within a single model. The hash codes are flexibly generated according to the newly coming queries, which provide any one or combination of modality features. Besides, the hashing learning procedure is efficiently supervised by the pair-wise semantic matrix to enhance the discriminative capability. It could successfully avoid the challenging symmetric semantic matrix factorization and O ( n 2 ) storage cost of semantic matrix. Finally, we design a fast discrete optimization to learn hash codes directly with simple operations. Experiments validate the superiority of the proposed approach.

Many achievements have been made on learning to hash for uni-modal and cross-modal retrieval. However, it is still an unsolved problem that how to directly and efficiently learn discriminative discrete hash codes for the multimedia retrieval, where both query and database samples are represented with heterogeneous multi-modal features. With this motivation, we propose a Fast Discrete Collaborative Multi-modal Hashing (FDCMH) method in this paper. We first propose an efficient collaborative multi-modal mapping that first transforms heterogeneous multi-modal features into the unified factors to exploit the complementarity of multi-modal features and preserve the semantic correlations in multiple modalities with linear computation and space complexity. Such shared factors also bridge the heterogeneous modality gap and remove the inter-modality redundancy. Further, we develop an asymmetric hashing learning module to simultaneously correlate the learned hash codes with low-level data distribution and high-level semantics. In particular, this design could avoid the challenging symmetric semantic matrix factorization and O(n2) memory cost (n is the number of training samples). It can support both computation and memory efficient discrete hash optimization. Experiments on several public multimedia retrieval datasets demonstrate the superiority of the proposed approach compared with state-of-the-art hashing techniques, in terms of both model learning efficiency and retrieval accuracy.

Due to the complex and dynamic environment of social media, user generated contents (UGCs) may inadvertently leak users’ personal aspects, such as the personal attributes, relationships and even the health condition, and thus place users at high privacy risks. Limited research efforts, thus far, have been dedicated to the privacy detection from users’ unstructured data (i.e., UGCs). Moreover, existing efforts mainly focus on applying conventional machine learning techniques directly to traditional hand-crafted privacy-oriented features, ignoring the powerful representing capability of the advanced neural networks. In light of this, in this article, we present a fine-grained privacy detection network (GrHA) equipped with graph-regularized hierarchical attentive representation learning. In particular, the proposed GrHA explores the semantic correlations among personal aspects with graph convolutional networks to enhance the regularization for the UGC representation learning, and, hence, fulfil effective fine-grained privacy detection. Extensive experiments on a real-world dataset demonstrate the superiority of the proposed model over state-of-the-art competitors in terms of eight standard metrics. As a byproduct, we have released the codes and involved parameters to facilitate the research community.

Hashtags, a user provides to a micro-video, are the ones which can well describe the semantics of the micro-video's content in his/her mind. At the same time, hashtags have been widely used to facilitate various micro-video retrieval scenarios (e.g., search, browse, and categorization). Despite their importance, numerous micro-videos lack hashtags or contain inaccurate or incomplete hashtags. In light of this, hashtag recommendation, which suggests a list of hashtags to a user when he/she wants to annotate a post, becomes a crucial research problem. However, little attention has been paid to micro-video hashtag recommendation, mainly due to the following three reasons: 1) lack of benchmark dataset; 2) the temporal and multi-modality characteristics of micro-videos; and 3) hashtag sparsity and long-tail distributions. In this paper, we recommend hashtags for micro-videos by presenting a novel multi-view representation interactive embedding model with graph-based information propagation. It is capable of boosting the performance of micro-videos hashtag recommendation by jointly considering the sequential feature learning, the video-user-hashtag interaction, and the hashtag correlations. Extensive experiments on a constructed dataset demonstrate our proposed method outperforms state-of-the-art baselines. As a side research contribution, we have released our dataset and codes to facilitate the research in this community.

Benefiting from the advancement of computer vision, natural language processing and information retrieval techniques, visual question answering (VQA), which aims to answer questions about an image or a video, has received lots of attentions over the past few years. Although some progress has been achieved so far, several studies have pointed out that current VQA models are heavily affected by the language prior problem, which means they tend to answer questions based on the co-occurrence patterns of question keywords (e.g., how many) and answers (e.g., 2) instead of understanding images and questions. Existing methods attempt to solve this problem by either balancing the biased datasets or forcing models to better understand images. However, only marginal effects and even performance deterioration are observed for the first and second solution, respectively. In addition, another important issue is the lack of measurement to quantitatively measure the extent of the language prior effect, which severely hinders the advancement of related techniques.

Efficiency is crucial to the online recommender systems, especially for the ones which needs to deal with tens of millions of users and items. Because representing users and items as binary vectors for Collaborative Filtering (CF) can achieve fast user-item affinity computation in the Hamming space, in recent years, we have witnessed an emerging research effort in exploiting binary hashing techniques for CF methods. However, CF with binary codes naturally suffers from low accuracy due to limited representation capability in each bit, which impedes it from modeling complex structure of the data.

Multi-modal hashing is an effective technique to support large-scale multimedia retrieval, due to its capability of encoding heterogeneous multi-modal features into compact and similarity-preserving binary codes. Although great progress has been achieved so far, existing methods still suffer from several problems, including: 1) All existing methods simply adopt fixed modality combination weights in online hashing process to generate the query hash codes. This strategy cannot adaptively capture the variations of different queries. 2) They either suffer from insufficient semantics (for unsupervised methods) or require high computation and storage cost (for the supervised methods, which rely on pair-wise semantic matrix). 3) They solve the hash codes with relaxed optimization strategy or bit-by-bit discrete optimization, which results in significant quantization loss or consumes considerable computation time. To address the above limitations, in this paper, we propose an Online Multi-modal Hashing with Dynamic Query-adaption (OMH-DQ) method in a novel fashion. Specifically, a self-weighted fusion strategy is designed to adaptively preserve the multi-modal feature information into hash codes by exploiting their complementarity. The hash codes are learned with the supervision of pair-wise semantic labels to enhance their discriminative capability, while avoiding the challenging symmetric similarity matrix factorization. Under such learning framework, the binary hash codes can be directly obtained with efficient operations and without quantization errors. Accordingly, our method can benefit from the semantic labels, and simultaneously, avoid the high computation complexity. Moreover, to accurately capture the query variations, at the online retrieval stage, we design a parameter-free online hashing module which can adaptively learn the query hash codes according to the dynamic query contents. Extensive experiments demonstrate the state-of-the-art performance of the proposed approach from various aspects.

Personalized rating prediction is an important research problem in recommender systems. Although the latent factor model (e.g., matrix factorization) achieves good accuracy in rating prediction, it suffers from many problems including cold-start, non-transparency, and suboptimal results for individual user-item pairs. In this article, we exploit textual reviews and item images together with ratings to tackle these limitations. Specifically, we first apply a proposed multi-modal aspect-aware topic model (MATM) on text reviews and item images to model users’ preferences and items’ features from different aspects , and also estimate the aspect importance of a user toward an item. Then, the aspect importance is integrated into a novel aspect-aware latent factor model (ALFM), which learns user’s and item’s latent factors based on ratings. In particular, ALFM introduces a weight matrix to associate those latent factors with the same set of aspects in MATM, such that the latent factors could be used to estimate aspect ratings. Finally, the overall rating is computed via a linear combination of the aspect ratings, which are weighted by the corresponding aspect importance. To this end, our model could alleviate the data sparsity problem and gain good interpretability for recommendation. Besides, every aspect rating is weighted by its aspect importance, which is dependent on the targeted user’s preferences and the targeted item’s features. Therefore, it is expected that the proposed method can model a user’s preferences on an item more accurately for each user-item pair. Comprehensive experimental studies have been conducted on the Yelp 2017 Challenge dataset and Amazon product datasets. Results show that (1) our method achieves significant improvement compared to strong baseline methods, especially for users with only few ratings; (2) item visual features can improve the prediction performance—the effects of item image features on improving the prediction results depend on the importance of the visual features for the items; and (3) our model can explicitly interpret the predicted results in great detail.

In recent years, many studies extract aspects from user reviews and integrate them with ratings for improving the recommendation performance. The common aspects mentioned in a user’s reviews and a product’s reviews indicate indirect connections between the user and product. However, these aspect-based methods suffer from two problems. First, the common aspects are usually very sparse, which is caused by the sparsity of user-product interactions and the diversity of individual users’ vocabularies. Second, a user’s interests on aspects could be different with respect to different products, which are usually assumed to be static in existing methods. In this article, we propose an Attentive Aspect-based Recommendation Model (AARM) to tackle these challenges. For the first problem, to enrich the aspect connections between user and product, besides common aspects, AARM also models the interactions between synonymous and similar aspects. For the second problem, a neural attention network which simultaneously considers user, product, and aspect information is constructed to capture a user’s attention toward aspects when examining different products. Extensive quantitative and qualitative experiments show that AARM can effectively alleviate the two aforementioned problems and significantly outperforms several state-of-the-art recommendation methods on the top-N recommendation task.

E-commerce users may expect different products even for the same query, due to their diverse personal preferences. It is well known that there are two types of preferences: long-term ones and short-term ones. The former refers to users’ inherent purchasing bias and evolves slowly. By contrast, the latter reflects users’ purchasing inclination in a relatively short period. They both affect users’ current purchasing intentions. However, few research efforts have been dedicated to jointly model them for the personalized product search. To this end, we propose a novel Attentive Long Short-Term Preference model, dubbed as ALSTP, for personalized product search. Our model adopts the neural networks approach to learn and integrate the long- and short-term user preferences with the current query for the personalized product search. In particular, two attention networks are designed to distinguish which factors in the short-term as well as long-term user preferences are more relevant to the current query. This unique design enables our model to capture users’ current search intentions more accurately. Our work is the first to apply attention mechanisms to integrate both long- and short-term user preferences with the given query for the personalized search. Extensive experiments over four Amazon product datasets show that our model significantly outperforms several state-of-the-art product search methods in terms of different evaluation metrics.

Although latent factor models (e.g., matrix factorization) achieve good accuracy in rating prediction, they suffer from several problems including cold-start, non-transparency, and suboptimal recommendation for local users or items. In this paper, we employ textual review information with ratings to tackle these limitations. Firstly, we apply a proposed aspect-aware topic model (ATM) on the review text to model user preferences and item features from different aspects, and estimate the aspect importance of a user towards an item. The aspect importance is then integrated into a novel aspect-aware latent factor model (ALFM), which learns user's and item's latent factors based on ratings. In particular, ALFM introduces a weighted matrix to associate those latent factors with the same set of aspects discovered by ATM, such that the latent factors could be used to estimate aspect ratings. Finally, the overall rating is computed via a linear combination of the aspect ratings, which are weighted by the corresponding aspect importance. To this end, our model could alleviate the data sparsity problem and gain good interpretability for recommendation. Besides, an aspect rating is weighted by an aspect importance, which is dependent on the targeted user's preferences and targeted item's features. Therefore, it is expected that the proposed method can model a user's preferences on an item more accurately for each user-item pair locally. Comprehensive experimental studies have been conducted on 19 datasets from Amazon and Yelp 2017 Challenge dataset. Results show that our method achieves significant improvement compared with strong baseline methods, especially for users with only few ratings. Moreover, our model could interpret the recommendation results in depth.

With the advancement of mobile computing technology and cloud-based streaming music service, user-centered music retrieval has become increasingly important. User-specific information has a fundamental impact on personal music preferences and interests. However, existing research pays little attention to the modeling and integration of user-specific information in music retrieval algorithms/models to facilitate music search. In this paper, we propose a novel model, named User-Information-Aware Music Interest Topic (UIA-MIT) model. The model is able to effectively capture the influence of user-specific information on music preferences, and further associate users' music preferences and search terms under the same latent space. Based on this model, a user information aware retrieval system is developed, which can search and re-rank the results based on age- and/or gender-specific music preferences. A comprehensive experimental study demonstrates that our methods can significantly improve the search accuracy over existing text-based music retrieval methods.

As an emerging technology to support scalable content-based image retrieval (CBIR), hashing has recently received great attention and became a very active research domain. In this study, we propose a novel unsupervised visual hashing approach called semantic-assisted visual hashing (SAVH). Distinguished from semi-supervised and supervised visual hashing, its core idea is to effectively extract the rich semantics latently embedded in auxiliary texts of images to boost the effectiveness of visual hashing without any explicit semantic labels. To achieve the target, a unified unsupervised framework is developed to learn hash codes by simultaneously preserving visual similarities of images, integrating the semantic assistance from auxiliary texts on modeling high-order relationships of inter-images, and characterizing the correlations between images and shared topics. Our performance study on three publicly available image collections: Wiki, MIR Flickr, and NUS-WIDE indicates that SAVH can achieve superior performance over several state-of-the-art techniques.

It is common that users are interested in finding video segments, which contain further information about the video contents in a segment of interest. To facilitate users to find and browse related video contents, video hyperlinking aims at constructing links among video segments with relevant information in a large video collection. In this study, we explore the effectiveness of various video features on the performance of video hyperlinking, including subtitle, metadata, content features (i.e., audio and visual), surrounding context, as well as the combinations of those features. Besides, we also test different search strategies over different types of queries, which are categorized according to their video contents. Comprehensive experimental studies have been conducted on the dataset of TRECVID 2015 video hyperlinking task. Results show that (1) text features play a crucial role in search performance, and the combination of audio and visual features cannot provide improvements; (2) the consideration of contexts cannot obtain better results; and (3) due to the lack of training examples, machine learning techniques cannot improve the performance.

In this paper, we study the problem of personalized text based music retrieval which takes users' music preferences on songs into account via the analysis of online listening behaviours and social tags. Towards the goal, a novel Dual-Layer Music Preference Topic Model (DL-MPTM) is proposed to construct latent music interest space and characterize the correlations among (user, song, term). Based on the DL-MPTM, we further develop an effective personalized music retrieval system. To evaluate the system's performance, extensive experimental studies have been conducted over two test collections to compare the proposed method with the state-of-the-art music retrieval methods. The results demonstrate that our proposed method significantly outperforms those approaches in terms of personalized search accuracy.

Rapid advances in mobile devices and cloud-based music service now allow consumers to enjoy music anytime and anywhere. Consequently, there has been an increasing demand in studying intelligent techniques to facilitate context-aware music recommendation. However, one important context that is generally overlooked is user’s venue, which often includes surrounding atmosphere, correlates with activities, and greatly influences the user’s music preferences. In this article, we present a novel venue-aware music recommender system called VenueMusic to effectively identify suitable songs for various types of popular venues in our daily lives. Toward this goal, a Location-aware Topic Model (LTM) is proposed to (i) mine the common features of songs that are suitable for a venue type in a latent semantic space and (ii) represent songs and venue types in the shared latent space, in which songs and venue types can be directly matched. It is worth mentioning that to discover meaningful latent topics with the LTM, a Music Concept Sequence Generation (MCSG) scheme is designed to extract effective semantic representations for songs. An extensive experimental study based on two large music test collections demonstrates the effectiveness of the proposed topic model and MCSG scheme. The comparisons with state-of-the-art music recommender systems demonstrate the superior performance of VenueMusic system on recommendation accuracy by associating venue and music contents using a latent semantic space. This work is a pioneering study on the development of a venue-aware music recommender system. The results show the importance of considering the influence of venue types in the development of context-aware music recommender systems.

Users' music preferences can be greatly influenced by their location and environment nearby. In this demonstration, we present an intelligent music recommender system, called VenueMusic, to automatically identify suitable music for various popular venues in our daily lives. VenueMusic enjoys a set of nice features: i) music concept sequence generation scheme and Location-aware Topic Model (LTM) are proposed to map the characteristics of venues and music into a latent semantic space, where suitability of music for a venue can be directly measured, ii) a smart interface enabling user to smoothly interact with VenueMusic, and iii) high quality music playlist. The demonstration will show several interesting use-cases of VenueMusic, and illustrate its superiority on recommending music based on where user presents.

The fast growth of online communities and increasing popularity of internet-accessing smart devices have significantly changed the way people consume and share music. As an emerging technology to facilitate effective music retrieval on the move, intelligent recommendation has been recently received great attentions in recent years. While a large amount of efforts have been invested in the field, the technology is still in its infancy. One of the major reasons for this stagnation is due to inability of the existing approaches to comprehensively take multiple kinds of contextual information into account. In the paper, we present a novel recommender system called Just-for-Me to facilitate effective social music recommendation by considering users' location related contexts as well as global music popularity trends. We also develop an unified recommendation model to integrate the contextual factors as well as music contents simultaneously. Furthermore, pseudo-observations are proposed to overcome the cold-start and sparsity problems. An extensive experimental study based on different test collections demonstrates that Just-for-Me system can significantly improve the recommendation performance at various geo-locations.

In recent years, location-aware music recommendation is increasing in popularity, as more and more users consume music on the move. In this demonstration, we present an intelligent system, called Just-for-Me, to facilitate accurate music recommendation based on where user presents. Our system is developed based on a novel probabilistic generative model, which can effectively integrate the location contexts and global music popularity trends. This approach allows us to gain more comprehensive modeling on user preference and thus significantly enhances the music recommendation performance.