This study was conducted to enhance the efficiency of chemical process systems and address the limitations of conventional methods through hyperparameter optimization. Chemical processes are inherently continuous and nonlinear, making stable operation challenging. The efficiency of processes often varies significantly with the operator’s level of expertise, as most tasks rely on experience. To move beyond the constraints of traditional simulation approaches, a new machine learning‐based simulation model was developed. This model utilizes a recurrent neural network (RNN) algorithm, which is ideal for analyzing time‐series data from chemical process systems, presenting new possibilities for applications in systems with special chemical reactions or those that are continuous and complex. Hyperparameters were optimized using a grid search method, and optimal results were confirmed when the model was applied to an actual distillation process system. By proposing a methodology that utilizes machine learning for the optimization of chemical process systems, this research contributes to solving new problems that were previously unaddressed. Based on these results, the study demonstrates that a machine learning simulation model can be effectively applied to continuous chemical process systems. This application enables the derivation of unique hyperparameters tailored to the specificities of a limited control volume system.

In multiobjective particle swarm optimization (MOPSO), the global‐best particle is randomly selected for each population particle from a nondominated solution set. However, this Roulette wheel‐based global particle selection is ineffective for convergence and diversity when the problem has numerous decision variables or a large number of global‐best candidates. Thus, this study proposes the cluster‐based MOPSO (CMOPSO). In CMOPSO, the similarities between particles are considered when selecting the global‐best particle. The cluster for each particle is determined based on the Euclidean distance in the decision or objective space. The proposed approach is demonstrated by applying an operating condition optimization problem to the hydrogen production process. The target process is a representative chemical plant with a large search space and strong nonlinearity. Furthermore, the performance of CMOPSO is assessed by comparing it with that of MOPSO. The results indicate that CMOPSO considered in the decision space exhibits superior performance in terms of convergence and diversity.

Cover Caption: The cover image is based on the Research Article Development of physical property prediction models for polypropylene composites with optimizing random forest hyperparameters by Chonghyo Joo et al., https://doi.org/10.1002/int.22700.

The physical properties required in polypropylene composites (PPCs) vary depending on the purpose of use. In the manufacturing of PPCs, it is crucial to determine the types and quantities of numerous reinforcements to meet the required physical properties. Owing to industrial complexity, most PPC manufacturers produce the composites repeatedly until the desired physical properties are obtained. Hence, to reduce trial and error, we developed prediction models for the physical properties of PPCs based on commercial recipe data. The recipe data included information about five physical properties of composites manufactured using 90 materials. In complex industrial environments, because one recipe is usually composed of 2–12 materials, numerous combinations of data sets are created. It causes the lack of the same material combination data sets and thus makes it difficult to develop a good performance model. Therefore, a novel categorization process is suggested as data preprocessing to overcome the data imbalance problem. The models for predicting the five physical properties (flexural strength, melting index, tensile strength, specific gravity, and flexural modulus) were developed using random forest, and the performance of the prediction models was improved via hyperparameter optimization. Furthermore, the effects of the materials on the performance of the models were numerically described through variable importance analysis. Finally, a software was developed to implement the prediction models in the industry. The software was applied to a commercial composite and achieved high accuracy, demonstrating the effectiveness of this study. Thus, the software suggests decision-making solutions to save cost and time by reducing the trial and error in the industrial environment with high complexity.

Cover Caption: The cover image is based on the Research Article Development and application of machine learning-based prediction model for distillation column by Hyukwon Kwon et al., https://doi.org/10.1002/int.22368.

Distillation is an energy-consuming process in the chemical industry. Optimizing operating conditions can reduce the amount of energy consumed and improve the efficiency of chemical processes. Herein, we developed a machine learning-based prediction model for a distillation process and applied the developed model to process optimization. The energy consumed in the distillation process is mainly used to control the temperature of the distillation column. We developed a model that predicted temperature according to the following procedure: (1) data collection; (2) characteristic extraction from the collected data to reduce learning time; (3) min–max normalization to improve prediction performance; and (4) a case study conducted to select the artificial neural network algorithm, optimization method, and batch size, which are the most appropriate elements for predicting production stage temperature. The result of the case study revealed that the most appropriate model was observed with a root mean squared error of 0.0791 and a coefficient of determination of 0.924 when the long short-term memory algorithm, Adam optimization method, and batch size of 128 were applied. We calculated the amount of steam consumption required to consistently maintain the production stage temperature by utilizing the developed model. The calculation result indicated that the amount of steam consumption was expected to be reduced by approximately 14%, from an average flow rate of 2763–2374 kg/h. This study proposed a control method applying a machine learning-based prediction model in the distillation process and confirmed that operation energy could be reduced through efficient operation.