This article proposes a probabilistic approach to account for robot stability uncertainty when planing motions over uneven terrains. A novel probabilistic stability criterion derived from the cumulative distribution of a tip-over metric is introduced that allows a safety constraint to be dynamically updated by available sensor data as it becomes available. The proposed safety constraint authorizes the planner to generates more conservative motion plans for areas with higher levels of uncertainty, while avoids unnecessary caution in well-known areas. The proposed systematic approach is particularly applicable to reconfigurable robots that can assume safer postures when required, although is equally valid for fixed-configuration platforms to choose safer paths to follow. The advantages of planning with the proposed probabilistic stability metric are demonstrated with data collected from an indoor rescue arena, as well as an outdoor rover testing facility.

Stability prediction is an important concern for mobile robots operating in rough environments. Having the capacity to predict areas of instability means pro-actively being able to plan safer traversable paths. The most influential tip-over stability measures are based on two criteria, the robot's center of mass (CM) and the supporting polygon (SP) defined by the convex area spanned between the ground contact-points. However, there is significant uncertainty associated with many parameters in the planning pipe-line: the actual robot kino-dynamic model, its localisation in the ground, and the terrain models, particularly in uneven terrain. This article proposes a statistical analysis of stability prediction to account for some of the uncertainties. This is accomplished using the force angle (FA) stability measure for a reconfigurable multi-tracked vehicle fitted with flippers, a manipulator arm and a sensor head. Probability density function (PDF) of contact-points, CM and the FA stability measure are numerically estimated, with simulation results performed on the open dynamics engine (ODE) simulator based on uncertain parameters. Two techniques are presented: a conventional Monte Carlo scheme, and a structured unscented transform (UT) which results in significant improvement in computational efficiency. Experimental results on maps obtained from a range camera fitted on the sensor head while the robot traverses over a ramp and a series of steps are presented that confirms the validity of the proposed probabilistic stability prediction method.

This paper proposes a motion planning strategy for reconfigurable mobile robots in uneven terrain. Paths that guarantee stability while at the same time maximise the height of the sensor payload, thereby enhancing the capacity of the robot to explore the environment are obtained using a search algorithm based on A*. This is particularly applicable to operations such as search and rescue where observing the environment for locating victims is the major objective, although the proposed technique can be generalised to incorporate other potentially conflicting objectives such as minimising energy. The proposed planning strategy looks at exploiting the (possibly incomplete) environment information available to the robot and/or operator as it explores novel terrain. The effectiveness of the approach is evaluated using data obtained from a multi-tracked robot fitted with a manipulator arm and a range camera in a mock-up search and rescue arena.