Soft exo-suit could facilitate walking assistance activities (such as level walking, upslope, and downslope) for unimpaired individuals. In this article, a novel human-in-the-loop adaptive control scheme is presented for a soft exo-suit, which provides ankle plantarflexion assistance with unknown human-exosuit dynamic model parameters. First, the human-exosuit coupled dynamic model is formulated to express the mathematical relationship between the exo-suit actuation system and the human ankle joint. Then, a gait detection approach, including plantarflexion assistance timing and planning, is proposed. Inspired by the control strategy that is used by the human central nervous system (CNS) to handle interaction tasks, a human-in-the-loop adaptive controller is proposed to adapt the unknown exo-suit actuator dynamics and human ankle impedance. The proposed controller can emulate human CNS behaviors which adapt feedforward force and environment impedance in interaction tasks. The resulting adaptation of actuator dynamics and ankle impedance is demonstrated with five unimpaired subjects and implemented on a developed soft exo-suit. The human-like adaptivity is performed by the exo-suit in several human walking speeds and illustrates the promising potential of the novel controller.

Many previous studies of soft exosuits improved human locomotion performance. However, there is no example to control a soft exosuit using human ankle impedance adaption in assistance tasks compliantly. In this article, the human–environment interaction information is exploited into the exosuit control. A novel fuzzy-based optimization and control method of soft exosuit is proposed to provide plantarflexion assistance for human walking by changing the human–robot interaction. In particular, a fuzzy neurodynamics optimization is developed to learn the unknown human ankle impedance parameters automatically. A fuzzy approximation technique is applied to improve the control performance of the exosuit when a human is walking with unknown human–robot interaction model parameters. This control scheme guarantees that the human–robot dynamics follows a target human ankle impedance model to obtain the compliant interaction performance. Experiments on different participants verify the effectiveness of the control scheme. Results show that a compliant human–robot interaction is achieved by learning the human–environment interaction parameters, i.e., the human ankle parameters. It indicates that our proposed method can facilitate exosuit control to achieve compliant robot–human–environment interaction.

Many previous works of soft wearable exoskeletons (exosuit) target at improving the human locomotion assistance, without considering the impedance adaption to interact with the unpredictable dynamics and external environment, preferably outside the laboratory environments. This article proposes a novel hierarchical human-in-the-loop paradigm that aims to produce suitable assistance powers for cable-driven lower limb exosuits to aid the ankle joint in pushing off the ground. It includes two primary loop layers: impedance learning in the external loop and human-in-the-loop adaptive management in the inner loop. Considering unknown terrains, its impedance model can be transferred to a quadratic programming problem with specified constraints, which a designed primal-dual optimization prototype then solves. Then, the presented impedance learning strategy is introduced to regulate the impedance model with the adaptive assistant powers for humans on different terrains. An adaptive controller is designed in the inner loop to balance the nonlinearities and compliance existing in the human-exosuit coexistence, while the robust mechanism compensates for disturbances to facilitate trajectory management without employing the general regressor. The advantage of the proposed technique over conventional solutions with fixed impedance parameters is that it can improve human walking performance over different terrains. Experiments demonstrate the significance of the approach.

More natural and intuitive control is expected to maximize the auxiliary effect of the powered prosthetic leg for lower limb amputees. In order to realize the stable and flexible walking of prosthetic legs in different terrains according to human intention, a brain-computer interface (BCI) based on motor imagery (MI) is developed. For the raw electroencephalogram (EEG) signals, discrete wavelet transform (DWT) is utilized to extract the time-frequency domain features, which are used as the input signals of the common spatial pattern (CSP) to obtain the time-frequency-space domain features of EEG signals. Then, a support vector machine (SVM) classifier and a directed acyclic graph (DAG) structure are combined to classify multiclass imaginary tasks. According to the result of human intention recognition, the prosthetic leg performs the corresponding gait trajectory generated by coding the ground reaction force (GRF). In addition, a sensory feedback loop is established by functional electrical stimulation (FES), which feeds back the movement of the prosthetic leg to human in real time. The effectiveness and feasibility of the developed EEG-based volitional control of powered prosthetic legs have been validated by three subjects, all of whom were able to fulfill smoothly walking on the floor, ascending stairs, and descending stairs according to their own intentions using prosthetic legs.