This paper presents a 1-link robotic arm that is antagonistically driven by one pair of a high performance super-coiled polymer actuators with an embedded controller. The actuator which is made from Spandex and nylon fibers is low-cost, easy to fabricate and light-weight. Moreover, it can generate large displacement and provide Joule heating capability. The main contribution of the paper is the model-based impedance controller, which enables position control of the antagonistic joint with variable stiffness and damping. The impedance control is a torque-based law, which in turn depends on a proposed backstepping control law to control the force of each actuator. The control system is proved to be stable using dissipativity stability theory and verified through experiments. Experimental results show that our system can track the angular position reference with the worst position error of 0.43deg and root-mean squared error of 0.16deg at steady state for sinusoidal waveform tracking (with the frequency of 0.1Hz), and the worst position error of 0.2deg for set-point regulation.

This paper presents a fabric actuator consisting of ordinary polymer fibers, conductive fibers, and twisted and coiled soft actuators (TCAs). Previous studies have developed a Spandex TCA (STCA) that is driven at a lower temperature than the conventional Nylon TCA and exhibits greater actuation strain. However, no method to drive STCAs via electrical joule-heating has been developed yet. The fabric actuator presented in this paper offers a solution to this problem by employing an STCA multiple fabrication method, a continuous fabrication method, bundling technology, and weaving technology. Two types of samples (cylindrical and planar) are fabricated and their performances are evaluated experimentally. From the actuation test according to the loads, the maximum contraction strain of 34.3% is measured. The repeatability is also verified through 200 cycles of actuation. Using a linearized model, the dynamic performance of the fabric actuator is predicted and compared with experimental results. An actual human arm size mannequin is driven by applying the fabric actuator, and angle control can be achieved with an encoder mounted on the joint. In addition, fabric actuator is weaved to sweater showing the possibility of wearable assistive robot.

From being soft, flexible and producing movement by contracting, soft linear actuators are said to have muscle-like properties. Due to these similarities, they are often called “artificial muscle actuator.” However, the strain produced by these actuators is generally insufficient to be utilized in a large range of applications. Some solutions have been developed, but they sacrifice force to increase the displacement. Meanwhile, the force produced by skeletal muscles increases as it contracts due to its working principle, which is based on the “sliding filament mechanism.” The limitations of soft linear actuators could be overcome by mimicking the contraction process of skeletal muscles. Two types of muscle-inspired robotic joint mechanisms based on the sliding filament mechanism principle are proposed in this work. The mechanisms can be operated using any type of soft linear actuators as well as traditional actuators or motors, and this work realizes the implementation using shape memory alloy wires and 3D printed mechanical parts. The feasibility of both proposed mechanisms, and their capabilities were experimentally verified.

This paper introduces a novel robot which is able to climb hanger cables of long span suspension bridges. The robot has been developed for inspection purpose, and it can help us remotely inspect the state of cables by using cameras and Non-Destructive Testing (NDT) devices. The robot consists of two traction modules, two sub modules, and an adhesion mechanism. The unique design of the traction module ensures the stable movement of the robot on the twisted surface of the hanger cable. In this paper, we describe the structure and environmental situation of hanger cables and the mechanisms of the robot. Also, the results of experiments in the indoor and outdoor environments are included.