Recent work on probe-based confocal endomicroscopy has demonstrated its potential role for real-time assessment of tumour margins during breast conserving surgery. However, endomicroscope probes tend to have a very small field-of-view, making surveillance of large areas of tissue difficult, and limiting practical clinical deployment. In this paper, a new robotic device for controlled, large area scanning based on a fibre bundle endomicroscope probe is proposed. The prototype uses a 2-DOF mechanism (−90 to +90 degrees bending on one axis, 360 degrees of rotation on a second axis) as well as a passive linear structure to conform to undulating surfaces. Both axes are driven by brushless DC servo motors with computer control, thus facilitating large field-of-view mosaicing. Experimental results have shown good repeatability and low hysteresis of the device, which is able to scan different surface trajectories (e.g. a spiral pattern over a hemi-spherical surface) with consistent tissue contact. Ex vivo human breast tissue results are demonstrated, illustrating a viable scanning approach for breast endomicroscopy.

Probe-based confocal laser endomicroscopy (pCLE) provides high resolution imaging of tissue in vivo. Maintaining a steady contact between target tissue and pCLE probe tip is important for image consistency. In this paper, a new prototype hand-held instrument for in vivo pCLE during Minimally Invasive Surgery (MIS) is presented. The proposed instrument incorporates adaptive force sensing and actuation, allowing improved image consistency and force control, thus minimizing tissue deformation and induced micro-structural variations. The performance and accuracy of the contact force control are evaluated in detailed laboratory settings and in vivo validation of the device during transanal microsurgery in a live porcine model further demonstrates the potential clinical value of the device.