An effective robotic wrist represents a key enabling element in robotic manipulation, especially in prosthetics. In this paper, we propose an under-actuated wrist system, which is also adaptable and allows to implement different under-actuation schemes. Our approach leverages upon the idea of soft synergies — in particular the design method of adaptive synergies — as it derives from the field of robot hand design. First we introduce the design principle and its implementation and function in a configurable test bench prototype, which can be used to demonstrate the feasibility of our idea. Furthermore, we report on results from preliminary experiments with humans, aiming to identify the most probable wrist pose during the pre-grasp phase in activities of daily living. Based on these outcomes, we calibrate our wrist prototype accordingly and demonstrate its effectiveness to accomplish grasping and manipulation tasks.

In this work we tackle the problem of planning grasps for an underactuated gripper which enable it to retrieve target objects from a cluttered environment. Furthermore, we investigate how additional manipulation capabilities of the gripping device, provided by active surfaces on the inside of the fingers, can lead to performance improvement in the grasp execution process. To this end, we employ a simple strategy, in which the target object is `pulled-in' towards the palm during grasping which results in firm enveloping grasps. We show the effectiveness of the suggested methods by means of experiments conducted in a real-world scenario.

Since the introduction of the first prototypes of robotic end-effectors showing manipulation capabilities, much research focused on the design and control of robot hand and grippers. While many studies focus on enhancing the sensing capabilities and motion agility, a less explored topic is the engineering of the surfaces that enable the hand to contact the object. In this paper we present the prototype of the Velvet Fingers smart gripper, a novel concept of end-effector combining the simple mechanics and control of under-actuated devices together with high manipulation possibilities, usually offered only by dexterous robotic hands. This enhancement is obtained thanks to active surfaces, i.e. engineered contact surfaces able to emulate different levels of friction and to apply tangential thrusts to the contacted object. Through the paper particular attention is dedicated to the mechanical implementation, sense drive and control electronics of the device; some analysis on the control algorithms are reported. Finally, the capabilities of the prototype are showed through preliminary grasps and manipulation experiments.

Industrial grippers are often used for grasping, while in-hand re-orientation and positioning are dealt with by other means. Contact surface engineering has been recently proposed as a possible mean to introduce dexterity in simple grippers, as in the Velvet Fingers smart gripper, a novel concept of end-effector combining simple under-actuated mechanics and high manipulation possibilities, thanks to conveyors which are built in the finger pads. This paper undergoes the modeling and control of the active conveyors of the Velvet Fingers gripper which are rendered able to emulate different levels of friction and to apply tangential thrusts to the contacted objects. Through the paper particular attention is dedicated to the mechanical implementation, sense drive and control electronics of the device. The capabilities of the prototype are showed in some grasping and manipulation experiments.

The design of grasping and manipulation systems is one of the most investigated topics in recent robotic and automation engineering. It is a process that has to take into account many development possibilities and to face different trade offs, as that between application possibilities and design complexity. In this work we present the design of a novel end-effector that merges the essential mechanics and control simplicity of underactuated devices, together with the high levels of manipulability usually featured in dexterous robotic hands. To obtain this enhancement, the proposed gripper considers the possibility offered by active surfaces, i.e. engineered contact surfaces able to simulate different levels of friction and to apply tangential thrust to the contacted object. The actual dexterity enhancement is evaluated by an analytical manipulability analysis and some examples of in hand manipulations and grasps are taken into account. A mechanical solution is presented, which implements the proposed idea through the adoption of one DoF active surfaces mounted on the fingers. The proposed solution presents a manipulability index one order of magnitude higher than common grippers.