Bioinspired robots are useful tools to study complex biomechanical processes of animal locomotion. Key movements and kinematic parameters are under the control of experimenters, which is impossible to perform when experimenting with living animals. The primary challenge to test biological hypotheses is designing realistic robots taking inspiration from swimming snakes. Yet, underlying biomechanics of undulatory swimming i.e., anguilliform swimming, remains poorly understood. Many of underwater snakebots are made of rigid segments that form a broken-line system, unlike the skeleto-muscular systems of living snakes include more than 200 vertebrae, conferring an extreme fluidity. This paper introduces a novel design based on hybrid continuum cable driven robot (HCDR) developed through interaction with biologists and roboticists. This Biology-Push design significantly increases the fluidity and freedom of the robot's motion. Thus, improved mimic snake's locomotion is given using cable-driven to represent linkages between muscles and vertebrae providing good fluidity. In addition, the association of rigid and flexible parts allows a homogeneous distribution of actuators and masses to design autonomous swimming snake robot. Combining literature data and kinematic of swimming snakes’ analyses, we implemented a kinematic model to control prototype’ motion in both a plane and a volume. Finally, a comparative study between the device kinematics and the snake's movements is carried out.

In this paper, a teleoperation control of a 7-DoF robot manipulator for Minimally Invasive Surgery (MIS), which guarantees a safety-enhanced compliant behavior in the null space, is described. The redundancy of the manipulator is exploited to provide a flexible workspace for nurses or other staff (assisting physicians, patient support). The issue with safety and accurate surgical task execution may arise in the presence of human-robot interaction. Based on the implemented impedance control of tele-operated MIS tasks, a safety enhanced constraint is applied on the compliant null space motion. At the same time, the control approach integrates an adaptive fuzzy compensator to guarantee the accuracy of the surgical tasks during the uncertain human-robot interaction. The performance of the proposed algorithm is verified with virtual surgical tasks. The results showed that the compliant null space motion is constrained in a safe area, and also that the accuracy of tool tip is improved, providing a flexible and safe collaborative behavior in the null space for human-robot interaction during surgical tasks.

In this paper, we provide a new generalized kinematic formulation of the Remote Center of Motion (RCM) constraint for serial robotic arms to be useful for implementation in torque-controlled robots. A minimally invasive surgery assisted by a serial robot could be used for inserting a surgical tool through a desired insertion position, i.e. trocar position. The restricted movement caused by the trocar, i.e. the RCM constraint, must be guaranteed by the robotic system in order to avoid injury to the patient. The generalized formulation, presented in this paper, associates the task-space with the RCM constraint coordinates, which are described by the minimum distance between the surgical tool and the trocar position. In order to simultaneously achieve the surgical tool-tip trajectory and the RCM constraint, two control methods are proposed and compared, one using a projection in the null-space, the other by combining both tasks using a task-space augmentation method. Moreover, when additional lower priority tasks have to be implemented in the null-space of the two higher priority tasks, the kinematic formulation simplifies the calculation of the null-space projectors. Furthermore, unlike the previous studies, the formulation represented can be applied not only in a kinematic control but also in a dynamic control approach. Simulations were conducted to validate effectiveness of the proposed formulation, using a planar 4-DOF system as well as the dynamic model of a Kuka LBR 7 iiwa R800 robot arm.

In this paper, we present a dynamically consistent control approach for manipulators with Cartesian Admittance Control (CAC) while guaranteeing a Remote Center of Motion (RCM) constraint. The dynamically consistent extended formulation was used in order to achieve a dynamically decoupled redundancy resolution, while a null-motion feedback was implemented that improves the tracking of the null-motion. Minimally Invasive Surgery (MIS) procedures are proposed as applications of the control approach formulated in this paper. The effectiveness of the proposed control approach was verified in simulation by using the Kuka LBR 7 iiwa R800 robot arm.

Performing a robotized telemedicine act via specific networks brings forth two issues. One is transparency in order to enable the operator, e.g. the medical ultrasound specialist, to safely and accurately perform bilateral tele-operation tasks despite the long time delays inherent to the communication link. To counter these effects, two strategies are combined to improve, at the operator site, the rendering of the interactions between the remote robotic systems with its environment (i.e. the patient), and the control of the robot's orientation. The first approach is the development of a new control architecture based on an internal model providing an anticipated value of the distant environment stiffness; it is complemented with a graphic user interface (GUI) which provides the expert with the real-time relative position of the haptic probe with the robot's end effector for a better tele-operated control. These combined strategies provide the expert with an improved interactive tool for a tele-diagnosis.