Lower-limb assisted exoskeletons are widely researched for movement assistance or rehabilitation training. Due to advantages of compliance with human body and lightweight, some cable-driven prototypes have been developed, but most of these can assist only unidirectional movement. In this paper we present an untethered cable-driven ankle exoskeleton that can achieve plantarflexion-dorsiflexion bidirectional motion bilaterally using a pair of single motors. The main weights of the exoskeleton, i.e., the motors, power supplement units, and control units, were placed close to the proximity of the human body, i.e., the waist, to reduce the redundant rotation inertia which would apply on the wearer’s leg. A cable force transmission system based on gear-pulley assemblies was designed to transfer the power from the motor to the end-effector effectively. A cable self-tension device on the power output unit was designed to tension the cable during walking. The gait detection system based on a foot pressure sensor and an inertial measurement unit (IMU) could identify the gait cycle and gait states efficiently. To validate the power output performance of the exoskeleton, a torque tracking experiment was conducted. When the subject was wearing the exoskeleton with power on, the muscle activity of the soleus was reduced by 5.2% compared to the state without wearing the exoskeleton. This preliminarily verifies the positive assistance effect of our exoskeleton. The study in this paper demonstrates the promising application of a lightweight cable-driven exoskeleton on human motion augmentation or rehabilitation.

Aquatic-aerial multimodal vehicle is a new concept aircraft that can freely shuttle between water and air. Some of the natural organisms provide the inspiration to realize this multi-locomotion. Most of current prototypes use rigid link mechanisms or hinges to morph the structure thus to adapt to the aquatic-aerial environment, which is commonly complicated and bulky. In this paper, we present a novel prototype with pneumatically-driven soft fins and arms that can fold and spread just like the flying squid. The fins and arms can augment the lift force during flying by spreading and reduce drag force during swimming by folding. The performance of the morphable structures was investigated in wind and water tunnel. The results explain the tradeoff strategies of multimodal-locomotion between water and air, and verify the feasibility of the novel aquatic-aerial vehicle with soft morphable structures.

Lower-limb exoskeletons are of great interest in the robotics community because of their various applications in enhancement and rehabilitation. In this paper we present an autonomous exoskeleton platform for ankle plantarflexion assistance. The untethered exoskeleton has a high efficiency transmission system with reduction ratio of 27.4:1. This allows relocating the actuator to the wearer's hip, which reduces device inertia. A feed-forward controller based on field oriented control was implemented to control the brushless DC motor on the exoskeleton. Through various performance tests, the exoskeleton was shown to provide a torque control bandwidth of 17.5Hz and can effectively track biological torque profiles. The augmentation factor (AF) of the exoskeleton is 64.7W, implying potential to reduce walking metabolic cost. This exoskeleton establishes an autonomous platform for experiments involving ankle assistance.