Recent advances in the modeling and simulation of vacuum electronic devices are reviewed. Design of these devices makes use of a variety of physical models and numerical code types. Progress in the development of these models and codes is outlined and illustrated with specific examples. The state of the art in device simulation is evolving to the point such that devices can be designed on the computer, thereby eliminating many trial and error fabrication and test steps. The role of numerical simulation in the design places can be expected to grow further in the future.

Gyrodevice oscillators and amplifiers (or gyro-oscillators and gyro-amplifiers) are being utilized in a variety of applications where high power levels are required at millimeter-wave frequencies. Gyro-oscillators, developed primarily for magnetic fusion research applications, have achieved power levels near 1 MW for pulse durations in excess of 1 s at frequencies above 100 GHz. Continued work on these devices should enable them to achieve continuous-wave operation at multimegawatt power levels at frequencies in the 100-GHz to 200-GHz range, thereby meeting the requirements of planned magnetic fusion experiments. The development of gyro-oscillators for fusion experiments has led to the utilization of the devices in several industrial applications, such as ceramic sintering and metal joining. Activities in this area involve adapting the oscillators to the industrial environment where reliability, efficiency, and ease of operation are paramount. Gyro-amplifiers are being developed for applications requiring phase coherence and instantaneous bandwidth, such as in linear accelerators and millimeter-wave radar. Impressive results from X-band to W-band already suggest the promise of these devices. Potential new applications and novel gyrodevice design approaches continue to attract the attention of researchers around the world.