A key capability for autonomous underground mining vehicles is real-time accurate localisation. While significant progress has been made, currently deployed systems have several limitations ranging from dependence on costly additional infrastructure to failure of both visual and range-sensor-based techniques in highly aliased or visually challenging environments. In our previous work, we presented a lightweight coarse vision-based localisation system that could map and then localise to within a few metres in an underground mining environment. However, this level of precision is insufficient for providing a cheaper, more reliable vision-based automation alternative to current range sensor-based systems. Here we present a new precision localisation system dubbed “LookUP”, which learns a neural-network-based pixel sampling strategy for estimating homographies based on ceiling-facing cameras without requiring any manual labelling. This new system runs in real time on limited computation resource and is demonstrated on two different underground mine sites, achieving real time performance at ~5 frames per second and a much improved average localisation error of ~1.2 metre.

CNNs have excelled at performing place recognition over time, particularly when the neural network is optimized for localization in the current environmental conditions. In this paper we investigate the concept of feature map filtering, where, rather than using all the activations within a convolutional tensor, only the most useful activations are used. Since specific feature maps encode different visual features, the objective is to remove feature maps that detract from the ability to recognize a location across appearance changes. Our key innovation is to filter the feature maps in an early convolutional layer, but then continue to run the network and extract a feature vector using a later, more viewpoint invariant layer in the same network. Our approach improves the condition and viewpoint invariance of a pre-trained network, using as little as a single training image pair from the deployment environment. An exhaustive experimental analysis is performed to determine the full scope of causality between early layer filtering and late layer extraction. For validity, we use three datasets: Oxford RobotCar, Nordland, and Gardens Point, achieving overall superior performance to NetVLAD. The work provides a number of new avenues for exploring CNN optimizations, without requiring any re-training of the network weights.

This work presents Semi-Supervised SLAM - a method for developing a map suitable for coarse localization within an underground environment with minimal human intervention, with system characteristics driven by real-world requirements of major mining companies. This work leverages existing information common within a mining environment - namely a surveyed mine map - which is used to sparsely ground map locations within the mine environment, increasing map accuracy and allowing localization within a global frame. Map creation utilizes a low cost camera sensor and minimal user information to produce a map which can be used for single camera localization within a mining environment. We evaluate the localization capabilities of the proposed approach in depth by performing data collection on operational underground mining vehicles within an active underground mine and by simulating occlusions common to the environment such as dust and water. The proposed system is capable of producing maps which have an average localization error 2.5 times smaller than the next best performing method ORB-SLAM2, comparable localization performance to a state-of-the-art deep learning approach (which is not a feasible solution due to both compute and training requirements) and is robust to simulated environmental obscurants.

The success of deep learning techniques in the computer vision domain has triggered a range of initial investigations into their utility for visual place recognition, all using generic features from networks that were trained for other types of recognition tasks. In this paper, we train, at large scale, two CNN architectures for the specific place recognition task and employ a multi-scale feature encoding method to generate condition- and viewpoint-invariant features. To enable this training to occur, we have developed a massive Specific PlacEs Dataset (SPED) with hundreds of examples of place appearance change at thousands of different places, as opposed to the semantic place type datasets currently available. This new dataset enables us to set up a training regime that interprets place recognition as a classification problem. We comprehensively evaluate our trained networks on several challenging benchmark place recognition datasets and demonstrate that they achieve an average 10% increase in performance over other place recognition algorithms and pre-trained CNNs. By analyzing the network responses and their differences from pre-trained networks, we provide insights into what a network learns when training for place recognition, and what these results signify for future research in this area.

The place recognition problem comprises two distinct subproblems; recognizing a specific location in the world (“specific” or “ordinary” place recognition) and recognizing the type of place (place categorization). Both are important competencies for mobile robots and have each received significant attention in the robotics and computer vision community, but usually as separate areas of investigation. In this paper, we leverage the powerful complementary nature of place recognition and place categorization processes to create a new hybrid place recognition system that uses place context to inform place recognition. We show that semantic place categorization creates an informative natural segmenting of physical space that in turn enables significantly better place recognition performance in comparison to existing techniques. In particular, this new semantically-informed approach adds robustness to significant local changes within the environment, such as transitioning between indoor and outdoor environments or between dark and light rooms in a house, complementing the capabilities of current condition-invariant techniques that are robust to globally consistent change (such as day to night cycles). We perform experiments using 4 novel benchmark datasets and show that semantically-informed place recognition outperforms the previous state-of-the-art systems. Like it does for object recognition [1], we believe that semantics can play a key role in boosting conventional place recognition and navigation performance for robotic systems.

Learning and recognition is a fundamental process performed in many robot operations such as mapping and localization. The majority of approaches share some common characteristics, such as attempting to extract salient features, landmarks or signatures, and growth in data storage and computational requirements as the size of the environment increases. In biological systems, spatial encoding in the brain is definitively known to be performed using a fixed-size neural encoding framework - the place, head-direction and grid cells found in the mammalian hippocampus and entorhinal cortex. Particularly paradoxically, one of the main encoding centers - the grid cells - represents the world using a highly aliased, repetitive encoding structure where one neuron represents an unbounded number of places in the world. Inspired by this system, in this paper we invert the normal approach used in forming mapping and localization algorithms, by developing a novel place recognition algorithm that seeks out and leverages repetitive, mutually complementary landmark frequencies in the world. The combinatorial encoding capacity of multiple different frequencies enables not only the ability to achieve efficient data storage, but also the potential for sub-linear storage growth in a learning and recall system. Using both ground-based and aerial camera datasets, we demonstrate the system finding and utilizing these frequencies to achieve successful place recognition, and discuss how this approach might scale to arbitrarily large global datasets and dimensions.

The recent focus on performing visual navigation and place recognition in changing environments has resulted in a large number of heterogeneous techniques each utilizing their own learnt or hand crafted visual features. This paper presents a generally applicable method for learning the appropriate distance metric by which to compare feature responses from any of these techniques in order to perform place recognition under changing environmental conditions. We implement an approach which learns to cluster images captured at spatially proximal locations under different conditions, separated from frames captured at different places. The formulation is a convex optimization, guaranteeing the existence of a global solution. We evaluate the general applicability of our method on two benchmark change datasets using three typical image pre-processing and feature types: GIST, Principal Component Analysis and learnt Convolutional Neural Network features. The results demonstrate that the distance metric learning approach uniformly improves single-image-based visual place recognition performance across all feature types. Furthermore, we demonstrate that this performance improvement is maintained when the sequence-based algorithm SeqSLAM is applied to the single-image place recognition results, leading to state-of-the-art performance.

Localization is a critical capability for many autonomous mobile robots. Implicit in all localization and place recognition techniques is the ability to decide whether a place is novel or familiar; the idea of “has this place been visited before?”. To make this decision accurately, localization systems typically require prior calibration or training on datasets from the specific type of operating environment; a requirement that is not practical in many environments or applications. One approach to this problem has been to remove the perfect data association requirement for place recognition systems by utilizing robust pose graphs. However, this approach requires a batch-based process and consequently does not solve the problem of real-time navigation in the interim before optimization. We present a novel technique which calibrates the localization system online as the robot moves through an environment, alleviating the need for prior calibration of a localization system. We leverage a robust pose graph optimization to determine a suitable model for our place recognition system which is sensor-invariant and does not require manually-labeled data for threshold tuning. The system continually refines place recognition parameters using sensory data and an optimized pose graph in order to increase the instantaneous precision of the location matches output by the underlying robust pose graph. We evaluate the system using the public New College dataset and a multi-sensor indoor office dataset. Our results indicate that the system produces superior mapping performance to a static place recognition model, and superior instantaneous place recognition performance to a robust pose graph technique.

This paper presents a novel place recognition algorithm inspired by the recent discovery of overlapping and multi-scale spatial maps in the rodent brain. We mimic this hierarchical framework by training arrays of Support Vector Machines to recognize places at multiple spatial scales. Place match hypotheses are then cross-validated across all spatial scales, a process which combines the spatial specificity of the finest spatial map with the consensus provided by broader mapping scales. Experiments on three real-world datasets including a large robotics benchmark demonstrate that mapping over multiple scales uniformly improves place recognition performance over a single scale approach without sacrificing localization accuracy. We present analysis that illustrates how matching over multiple scales leads to better place recognition performance and discuss several promising areas for future investigation.

Wi-Fi is a commonly available source of localization information in urban environments but is challenging to integrate into conventional mapping architectures. Current state of the art probabilistic Wi-Fi SLAM algorithms are limited by spatial resolution and an inability to remove the accumulation of rotational error, inherent limitations of the Wi-Fi architecture. In this paper we leverage the low quality sensory requirements and coarse metric properties of RatSLAM to localize using Wi-Fi fingerprints. To further improve performance, we present a novel sensor fusion technique that integrates camera and Wi-Fi to improve localization specificity, and use compass sensor data to remove orientation drift. We evaluate the algorithms in diverse real world indoor and outdoor environments, including an office floor, university campus and a visually aliased circular building loop. The algorithms produce topologically correct maps that are superior to those produced using only a single sensor modality.

Current state of the art robot mapping and navigation systems produce impressive performance under a narrow range of robot platform, sensor and environmental conditions, in contrast to animals such as rats that produce “good enough” maps that enable them to function under an incredible range of situations. In this paper we present a rat-inspired featureless sensor-fusion system that assesses the usefulness of multiple sensor modalities based on their utility and coherence for place recognition, without knowledge as to the type of sensor. We demonstrate the system on a Pioneer robot in indoor and outdoor environments with abrupt lighting changes. Through dynamic weighting of the sensors, the system is able to perform correct place recognition and mapping where the static sensor weighting approach fails.

In this paper we present a method for autonomously tuning the threshold between learning and recognizing a place in the world, based on both how the rodent brain is thought to process and calibrate multisensory data and the pivoting movement behaviour that rodents perform in doing so. The approach makes no assumptions about the number and type of sensors, the robot platform, or the environment, relying only on the ability of a robot to perform two revolutions on the spot. In addition, it self-assesses the quality of the tuning process in order to identify situations in which tuning may have failed. We demonstrate the autonomous movement-driven threshold tuning on a Pioneer 3DX robot in eight locations spread over an office environment and a building car park, and then evaluate the mapping capability of the system on journeys through these environments. The system is able to pick a place recognition threshold that enables successful environment mapping in six of the eight locations while also autonomously flagging the tuning failure in the remaining two locations. We discuss how the method, in combination with parallel work on autonomous weighting of individual sensors, moves the parameter dependent RatSLAM system significantly closer to sensor, platform and environment agnostic operation.