Soft robots are capable of inherently safer interactions with their environment than rigid robots since they can mechanically deform in response to unanticipated stimuli. However, their complex mechanics can make planning and control difficult, particularly with tasks such as locomotion. In this work, we present a mobile and untethered underwater crawling soft robot, PATRICK, paired with a testbed that demonstrates closed-loop locomotion planning. PATRICK is inspired by the brittle star, with five flexible legs actuated by a total of 20 shape-memory alloy (SMA) wires, providing a rich variety of possible motions via its large input space. We propose a motion planning infrastructure based on a simple set of PATRICK's motion primitives, and provide experiments showing that the planner can command the robot to locomote to a goal state. These experiments contribute the first examples of closed-loop, state-space goal seeking of an underwater, untethered, soft crawling robot, and make progress towards full autonomy of soft mobile robotic systems.

The Spherical Underactuated Planetary Exploration Robot ball (SUPERball) is an ongoing project within NASA Ames Research Center's Intelligent Robotics Group and the Dynamic Tensegrity Robotics Lab (DTRL). The current SUPERball is the first full prototype of this tensegrity robot platform, eventually destined for space exploration missions. This work, building on prior published discussions of individual components, presents the fully-constructed robot. Various design improvements are discussed, as well as testing results of the sensors and actuators that illustrate system performance. Basic low-level motor position controls are implemented and validated against sensor data, which show SUPERball to be uniquely suited for highly dynamic state trajectory tracking. Finally, SUPERball is shown in a simple example of locomotion. This implementation of a basic motion primitive shows SUPERball in untethered control.

NASA Ames Research Center is developing a compliant modular tensegrity robotic platform for planetary exploration. In this paper we present the design and evolution of the platform's main hardware component, an untethered, robust tensegrity strut, with rich sensor feedback and cable actuation. Each strut is a complete robot, and multiple struts can be combined together to form a wide range of complex tensegrity robots. Our current goal for the tensegrity robotic platform is the development of SUPERball, a 6-strut icosahedron underactuated tensegrity robot aimed at dynamic locomotion for planetary exploration rovers and landers, but the aim is for the modular strut to enable a wide range of tensegrity morphologies. SUPERball is a second generation prototype, evolving from the tensegrity robot ReCTeR, which is also a modular, lightweight, highly compliant 6-strut tensegrity robot that was used to validate our physics based NASA Tensegrity Robot Toolkit (NTRT) simulator. Many hardware design parameters of the SUPERball were driven by locomotion results obtained in our validated simulator. These evolutionary explorations helped constrain motor torque and speed parameters, along with strut and string stress. As construction of the hardware has finalized, we have also used the same evolutionary framework to evolve controllers that respect the built hardware parameters.

The TinyTeRP is a small, low-cost, modular robotics platform used to study robot sensing and control in large numbers of miniature robots. A fully assembled TinyTeRP costs approximately $50, is 1.7 × 1.8 × 2 cm3, and can move at speeds up to 50 cm/s. The robot is designed around a wheeled platform onto which different circuit boards can be stacked providing hardware modularity. The base module integrates a microcontroller with an 802.15.4 radio used for both sensing and communication between robots. An inertial sensing module used to improve single robot control is provided as an example of an additional sensing board. A simple `rendezvous' algorithm using received signal strength indicator (RSSI) data from the radio illustrates a distributed control algorithm with the TinyTeRP.