Demonstration venue · read-only. Every page can be browsed; the buttons that would change it are switched off. Create an account to run TaxoReview on your own data. A simulation from public publication records: the people listed were not invited and did not agree to review.
? Tutorial for this page

Hyung Kyi Yi

dblp:139/6828 · DBLP profile ↗
← Back
2ranked-venue papers
0as first author
0since 2021 · last 1995
—ORCID · none

Domains — the database's venue-derived domains; a paper can count in several

Applied, interdisciplinary, general and emerging computing · 2

Expertise — from the expertise taxonomy: the topics of the expert's papers under the CCF categories. A weight counts papers with recency: 1 for a paper about the topic, 0.3 when the topic is its context, halved every five years.

Artificial intelligence
2 papers
Motion planning and robot control · 100%

Topics — the 5 heaviest of 5, each with the papers that count most for it

TopicWeightPapersLastEvidence papers
Robotics › Motion planning and robot control › robot control › sliding mode control
adaptive sliding mode control
0.021995
Comments on "A sliding mode controller with bound estimation for robot manipulators" · IEEE Trans. Robotics Autom. 1995
Comments on "A sliding mode controller with bound estimation for robot manipulators" · IEEE Trans. Robotics Autom. 1995
Robotics › Motion planning and robot control
robot control
0.021995
Comments on "A sliding mode controller with bound estimation for robot manipulators" · IEEE Trans. Robotics Autom. 1995
Comments on "A sliding mode controller with bound estimation for robot manipulators" · IEEE Trans. Robotics Autom. 1995
Robotics › Motion planning and robot control › robot control
sliding mode control
0.021995
Comments on "A sliding mode controller with bound estimation for robot manipulators" · IEEE Trans. Robotics Autom. 1995
Comments on "A sliding mode controller with bound estimation for robot manipulators" · IEEE Trans. Robotics Autom. 1995
Robotics › Motion planning and robot control › robot control
lyapunov stability
0.021995
Comments on "A sliding mode controller with bound estimation for robot manipulators" · IEEE Trans. Robotics Autom. 1995
Comments on "A sliding mode controller with bound estimation for robot manipulators" · IEEE Trans. Robotics Autom. 1995
Robotics › Motion planning and robot control
stability analysis
0.021995
Comments on "A sliding mode controller with bound estimation for robot manipulators" · IEEE Trans. Robotics Autom. 1995
Comments on "A sliding mode controller with bound estimation for robot manipulators" · IEEE Trans. Robotics Autom. 1995

Methods — techniques the papers use, named apart from their topics

lasalle theorem · 0.0stability proof · 0.0nonautonomous system analysis · 0.0
YearPublicationVenuePosition
1995 Comments on "A sliding mode controller with bound estimation for robot manipulators"
abstract
This authors point out that the proofs of the main results in the above paper by Su-Leung (ibid., vol.9, no.2, p.208-14 (1993)) are not correct. And rigorous proofs through more advanced stability results are presented.>
Han Ho Choi, Hyung Kyi Yi, Myung Jin Chung
IEEE Trans. Robotics Autom.2
1995 Comments on "A sliding mode controller with bound estimation for robot manipulators"
abstract
In the above paper by Su-Leung (IEEE Trans. Robot Automat., vol.9, no.2, p.208-14 (1993)), an adaptive sliding mode control scheme for the trajectory control of robot manipulators is developed. The proof of Theorem 1 in the paper is accomplished by resorting to the Lasalle theorem. It is well known that the Lasalle theorem can be applied to either autonomous systems or periodic nonautonomous systems, but it is not applicable to general nonautonomous systems. The Lasalle theorem is not applicable to the manipulator tracking control system given in the paper because the tracking control system considered in the paper is neither an autonomous system nor a periodic nonautonomous system but it can be classified into general nonautonomous systems. Therefore, the proof of Theorem 1 in the paper is not correct.>
Han Ho Choi, Hyung Kyi Yi, Myung Jin Chung, Chun-Yi Su
IEEE Trans. Robotics Autom.2