This paper proposes the demonstration of a comprehensive novel acquisition infrastructure based on standard 10G Ethernet interface technology. This infrastructure is suitable for digital cinematography as well as HD production workflows and comprises camera, mobile solid state recorder and monitor all connected through a 10G Ethernet based network. Optical Ethernet technology enables bidirectional, high speed, long distance networking at affordable cost as conventional IT equipment - such as switches - are fully supported. Interface and file formats enable versatile metadata support and provide a back channel to the camera for control purposes. Advances in solid state storage capacity in combination with interface performance eliminate any need for costly and quality compromising compression.

The presented HiPAR-DSP is a highly parallel DSP core for system on a chip video- and image processing applications. The architecture is based on an array of up to 16 parallel data paths steered by a single RISC controller in SIMD style. Each data path consists of three VLIW controlled arithmetical units: a 16 bit MAC and 32 bit ALU and shift & round units. A divided memory concept serves local caches for each data path as well as a special shared matrix memory which enables concurrent access from all data paths in every clock cycle. External connection can be provided via a modular DMA controller which enables an easy interfacing to other on chip modules. The HiPAR-DSP core has been manufactured in the most powerful version with 16 data paths in second Quarter 2001 and delivers with a maximum clock frequency of 100 MHz 4.8 GOPS peak and about 3 GOPS sustained performance. In addition to the core architecture the paper will also present the software development system for the HiPAR-DSP including C/C++ compiler, assembler, simulator and a PCI board with onboard video I/O interfaces.

Architecture and design of the HiPAR-DSP, a SIMD controlled signalprocessor with parallel data paths, VLIW and novel memory design.The processor architecture is derived from an analysis of thetarget algorithms and specified in VHDL on register transfer level.A team of more than 20 graduate students covered the whole designprocess, including the synthesizable VHDL description, synthesis,routing and backannotation as the development of a complete softwaredevelopment environment.The 175mm{2}, 0.5µm 3LM CMOSdesign with 1.2 million transistors operates at 80 MHz and achievesa sustained performance of more than 600 million arithmetic operations.