In the past few years, Ethernet Passive Optical Networks (EPONs) have rapidly gained large popularity in broadband access networks. However the current standard has no management protocols aiming at reducing power consumption. In this paper, we propose an Energy Management Mechanism (EMM) within the IEEE 802.3ah control scheme. The main idea is to switch Optical Network Units (ONUs) to sleep mode and determine a suitable wakeup time schedule at the Optical Line Terminal (OLT). In the proposed EMM there is a trade-off between maximizing the power saving and guaranteeing the network performance. We compare two types of downstream scheduling schemes, Upstream Centric Scheduling (UCS) and Downstream Centric Scheduling (DCS), which are different in the way they assign 'active' and 'sleep' states to ONUs. Simulation results in terms of energy consumption and queuing delay are shown for the EMM based EPON system.

Fiber based access networks are recognized as promising technologies for solving broadband bandwidth bottlenecks. TDM-PONs, which are passive and non-reconfigurable, are the most widely deployed type of fiber access networks today. However, due to their passive nature, TDM-PONs encounter several issues such as inflexible coverage, lack of intelligence for control, and inability to counter security attacks. Based on current issues in optical access networks, we propose a novel non-volatile, reconfiguration node. The proposed remote node can reconfigure the network to adapt to varying degrees of deployment conditions and/or network attacks. Moreover, the proposed remote node incorporates a novel quasi-passive device that reconfigures using remotely supplied energy from CO. This quasi-passive device technology does not consume any energy once it reconfigures into a new latching states. Therefore, the proposed remote node has very low energy consumption and does not require local power supply to preserve the passivity of the passive distribution network. In particular, the proposed quasi-passive device technology is implemented using a novel tri-state Micro- Electro-Mechanical System (MEMS) actuator structure and the device demonstrates very small energy consumption requirement to enable energy be remotely supplied from CO. Also, the MEMS structure is shown to demonstrate acceptable insertion losses to makes it suitable for flexible energy distribution. Simulation study shows the proposed reconfigurable device would outperform traditional passive splitter in terms of maximum number of supportable users under realistic deployment conditions.

Various wireless and optical access technologies have been developed to address different issues in access networks. By combining the complementary characteristics of wireless and optical networks, a hybrid optical-wireless access network will enable broadband, ubiquitous, and cost-effective last-mile service to the users. In this paper, a reconfigurable optical backhaul leveraging both the standard Time Division Multiplexing Passive Optical Network (TDM-PON) technology and wavelength division multiplexed (WDM) ring is proposed to achieve a higher bandwidth efficiency than simply using point-to-point backhaul links. Furthermore, an integrated routing algorithm which can adapt to the change of overall demand among different service districts by taking advantage of the proposed optical backhaul is also proposed. An experimental testbed is implemented to evaluate the reconfigurable scheme and its feasibility. Also, simulation results show that the proposed integrated routing with load balancing can improve the performance in hybrid optical and wireless networks.