With the increasing demand for new healthcare solutions and technologies, such as those resulting from the COVID-19 crisis, and the growing elderly population, exoskeletons for teleoperation are a promising solution for many future medical applications. In this context, we propose two force- sensitive upper-limb exoskeletons for teleoperation, that are characterized by: i) torque-controlled robotic actuators, ii) rigid-body model compensations, and iii) a lightweight design achieved through the use of Bowden cable transmissions and remotely placed actuators. Specifically, we present a semi-active upper-limb exoskeleton for which we demonstrate human- device interaction control and bilateral teleoperation with force- feedback, evaluated via simulation, in the lab and over the Internet. We also introduce a design for a future fully-active upper-limb exoskeleton with two contact force/torque sensors, for a dual-arm device, which features a novel 3-degrees-of- freedom exoskeleton shoulder design and a contact wrench mitigation controller, as demonstrated through simulation. With this work, we propose the essential technical steps towards a novel teleoperation system for elderly care.

Upper limb prostheses are commonly mounted to the human residual limb by a passive socket. By this design, the sensitive residual limb is exposed to high reaction wrenches, which can be a source of medical complications. In this article, we introduce an active force-sensitive robotic socket, which carries the prosthesis, offloads the residual limb, and allows guidance via small interaction forces at the same time. We investigate the feasibility of this concept by a force-sensitive and wearable shoulder exoskeleton, calledexoprosthesiswhen being combined with a prosthesis. We provide a first mechatronics prototype, two floating base controllers, and an analysis of the loads acting on the user body. Simulations and experiments confirm the concept and reveal that the wrench at residual limb can be fully compensated for the static case and by$\approx \text{50}\%$for the investigated motions. Human-in-the-loop tests are successfully performed by three able-bodied users showing the later real-world use case in a complex grasping situation. Overall, we believe that a force-sensitive robotic socket has the potential to advance prosthetics to a new level as it provides an intuitive and seamless user control interface.

In this paper the concept of a unified torque/impedance controller is applied to a pneumatically actuated, antagonistic robot joint. The investigated control algorithm consists of a cascaded structure in which the outer torque/impedance controller commands a desired torque to two cylinder-based force controllers. The torque-/impedance controller is equipped with a virtual tank that ensures passivity of the control loops above force level. Additionally, a shaping function provides a continuous transition to impedance control in case of sudden contact loss during a torque control operation. External torques used in the feedback loop for contact force regulation are estimated by a momentum observer. Experimental and simulation results show a maximum deflection of 9.7° over 130 ms in case of contact loss until a resting position is reached. Additionally, step and sinusoidal torque tracking up to 5 Hz was successfully tested at good performance.

Soft robotics methods such as impedance control and reflexive collision handling have proven to be a valuable tool to robots acting in partially unknown and potentially unstructured environments. Mainly, the schemes were developed with focus on classical electromechanically driven, torque controlled robots. There, joint friction, mostly coming from high gearing, is typically decoupled from link-side control via suitable rigid or elastic joint torque feedback. Extending and applying these algorithms to stiff hydraulically actuated robots poses problems regarding the strong influence of friction on joint torque estimation from pressure sensing, i.e. link-side friction is typically significantly higher than in electromechanical soft robots. In order to improve the performance of such systems, we apply state-of-the-art fault detection and estimation methods together with observer-based disturbance compensation control to the humanoid robot Atlas. With this it is possible to achieve higher tracking accuracy despite facing significant modeling errors. Compliant end-effector behavior can also be ensured by including an additional force/torque sensor into the generalized momentum-based disturbance observer algorithm from [1].