The CubeSat Radiometer Radio Frequency Interference Technology Validation (CubeRRT) mission is developing a 6U CubeSat system to demonstrate radio frequency interference (RFI) detection and filtering technologies for future microwave radiometer remote sensing missions. CubeRRT will perform observations of Earth brightness temperatures from 6-40 GHz using a 1 GHz bandwidth tuned channel and will demonstrate on-board real-time RFI processing. The system is currently under development, with an expected launch date in mid-2018 followed by a one year period of on-orbit operations. CubeRRT spacecraft and radiometer instrument testing as well as the mission concept of operations are described in this paper.

In this paper we discuss the necessary technology required to enable the future of spectrum resource constrained missions. We discuss the CubeSat Radiometer Radio Frequency Interference Technology (CubeRRT) validation mission and the development of its digital backend, necessary for performing on-board RFI detection and filtering for wideband high frequency radiometry. The CubeRRT mission will validate the on-board RFI filtering technology solving technological challenges such as bandwidth, data downlink volume, and RFI types. We present a few initial results of the backend spectrometer leading to full-system integration and test.

The CubeSat Radiometer Radio Frequency Interference Technology Validation (CubeRRT) mission is developing a 6U CubeSat system to demonstrate radio frequency interference (RFI) detection and filtering technologies for future microwave radiometer remote sensing missions. CubeRRT will perform observations of Earth brightness temperatures from 6-40 GHz using a 1 GHz bandwidth tuned channel and will demonstrate on-board real-time RFIS processing. The system is currently under development, with an expected launch date in mid-2018 followed by a one year period of on-orbit operations. Development of the CubeRRT spacecraft, radiometer instrument, and concepts of operation are described in this paper.

In this paper we discuss the design and development of the Radiometer Digital Backend (RDB) of the CubeSat Radiometer Radio Frequency Interference Technology (CubeRRT) validation mission. We present a brief introduction of the mission and the Radio Frequency Interference (RFI) detection and mitigation algorithm. The digital backend developed for the CubeSat is presented. The digital backend has unique capabilities of taking in wide bandwidths of up to 1GHz and can perform on-board complex operations to detect and filter out RFI in real-time. We present a few initial results of the backend spectrometer leading to full-system integration and test.

The CubeSat Radiometer Radio Frequency Interference Technology Validation (CubeRRT) mission is developing a 6U CubeSat system to demonstrate radio frequency interference (RFI) detection and mitigation technologies for future microwave radiometer remote sensing missions. CubeRRT will perform observations of Earth brightness temperatures from 6-40 GHz using a 1 GHz bandwidth tuned channel, and will demonstrate on-board real-time RFI processing. The system is currently under development, with launch readiness expected in 2018 followed by a one year period of on-orbit operations. Project plans and status are reported in this paper.

The Murchison Widefield Array is a dipole-based aperture array synthesis telescope designed to operate in the 80-300 MHz frequency range. It is capable of a wide range of science investigations but is initially focused on three key science projects: detection and characterization of three-dimensional brightness temperature fluctuations in the 21 cm line of neutral hydrogen during the epoch of reionization (EoR) at redshifts from six to ten; solar imaging and remote sensing of the inner heliosphere via propagation effects on signals from distant background sources; and high-sensitivity exploration of the variable radio sky. The array design features 8192 dual-polarization broadband active dipoles, arranged into 512 ldquotilesrdquo comprising 16 dipoles each. The tiles are quasi-randomly distributed over an aperture 1.5 km in diameter, with a small number of outliers extending to 3 km. All tile-tile baselines are correlated in custom field-programmable gate array based hardware, yielding a Nyquist-sampled instantaneous monochromaticuvcoverage and unprecedented point spread function quality. The correlated data are calibrated in real time using novel position-dependent self-calibration algorithms. The array is located in the Murchison region of outback Western Australia. This region is characterized by extremely low population density and a superbly radio-quiet environment, allowing full exploitation of the instrumental capabilities.