Demonstration venue · read-only. Every page can be browsed; the buttons that would change it are switched off. Create an account to run TaxoReview on your own data. A simulation from public publication records: the people listed were not invited and did not agree to review.
? Tutorial for this page

Hyuk Jin Lee

dblp:189/5888 · DBLP profile ↗
← Back
2ranked-venue papers
0as first author
0since 2021 · last 2019
0000-0002-2613-116XORCID · corroborated

Domains — the database's venue-derived domains; a paper can count in several

Artificial intelligence and machine learning · 2Systems, architecture and hardware · 2

Expertise — from the expertise taxonomy: the topics of the expert's papers under the CCF categories. A weight counts papers with recency: 1 for a paper about the topic, 0.3 when the topic is its context, halved every five years.

Artificial intelligence
1 paper
Robot manipulation · 100%

Topics — the 4 heaviest of 4, each with the papers that count most for it

TopicWeightPapersLastEvidence papers
Robotics › Robot manipulation
actuator design
0.412019
Azimuthal Shear Deformation of a Novel Soft Fiber-reinforced Rotary Pneumatic Actuator · ICRA 2019
Robotics › Robot manipulation › actuation › pneumatic artificial muscle
pneumatic actuator
0.412019
Azimuthal Shear Deformation of a Novel Soft Fiber-reinforced Rotary Pneumatic Actuator · ICRA 2019
Robotics › Robot manipulation › soft robotics
soft actuator
0.412019
Azimuthal Shear Deformation of a Novel Soft Fiber-reinforced Rotary Pneumatic Actuator · ICRA 2019
Robotics › Robot manipulation
soft robotics
0.412019
Azimuthal Shear Deformation of a Novel Soft Fiber-reinforced Rotary Pneumatic Actuator · ICRA 2019

Methods — techniques the papers use, named apart from their topics

finite element simulation · 0.4anisotropic fiber reinforcement · 0.4
YearPublicationVenuePosition
2019 Azimuthal Shear Deformation of a Novel Soft Fiber-reinforced Rotary Pneumatic Actuator
abstract
The Elastic Inflatable Actuators (EIAs) has several advantages such as the inherent compliance due to the body comprised of a soft materials such as silicone. Among them, the soft fiber reinforced actuator is based on the principle that the expansion of enclosure and constraint of fiber pattern lead to a desired operation. While lots of researches on the actuator has been attributed to linear and bending motions, however, there are only few researches on rotary, or torsional, motions. In this paper, we propose a new actuator that causes azimuthal deformation due to restriction of anisotropically distributed fiber element along the radial direction and expansion of the hyper elastic material. Structure design of the actuator and a fabrication process of the actuator are presented. Subsequently, FEM simulation and experiment are executed to measure rotation angles of the actuators corresponding to the applied pressure.
Young Min Lee, Hyuk Jin Lee, Hyungpil Moon, Hyoukryeol Choi, Jachoon Koo
ICRA2
2017 Improving transparency in physical human-robot interaction using an impedance compensator
abstract
In the physical human-robot interaction system, improving transparency performance which allows humans to move as if there is no robot is a challenging topic. In general physical human-robot interaction, the multiaxial force sensor is used to control the robot. However the signal measured from the force sensor involves not only the force applied to the robot by the human motion intention but also the influence of the natural force feedback between the robot and the human hand due to the motion of the robot. Therefore, in order to improve the transparency performance, it is necessary to consider the dynamics of the human hand as well as the dynamics of the robot. In this paper, an novel algorithm to improve transparency performance is proposed. The proposed algorithm uses only the multiaxial force sensor and compensates the natural force feedback by using the human hand impedance and further improves the transparency performance which has a limitation adjusting admittance parameters. The validity of the proposed algorithm is described through the system model analysis and the experiment using the hydraulic upper limb exoskeleton.
Kyeong Ha Lee, Seung Guk Baek, Hyuk Jin Lee, Hyoukryeol Choi, Hyungpil Moon, Jachoon Koo
IROS3