Stabilising an inverted pendulum on a cart is a well-known control problem. This paper proposes the mechan-ical and control design for solving the oscillation problem of a variable-length flexible beam mounted on a mobile robot. The system under consideration is the robot PovRob, used at the European Organization for Nuclear Research (CERN) for visual and remote inspection tasks of particle accelerators. The flexible beam mounted on the robot houses cameras and sensors. The innovative aspect of the approach concerns the use of actuated masses mounted at the end of the rod, which induces an impulsive moment due to their inertia and angular acceleration. The modelling of the flexible rod has been suitably simplified in a lumped-parameter system, with dynamic parameters related to the rod's flexibility. A linearisation of the dynamic model allows a linear-quadratic control to stabilise the system. Experimental results support the identification and the validation of the dynamic model, while simulation results evaluate the performances of the designed control law.

Part de la conferència: ICINCO 2021: 18th International Conference on Informatics in Control, Automation and Robotics (juliol 2021)

This paper presents a new procedure to design a control law using the classical interconnection and damping assignment technique within the passivity-based port-Hamiltonian framework. The sought goal is to reduce the complexity of solving the so-called matching equations. The proposed approach is applied to two case studies of planar rolling nonprehensile manipulation, namely, the ball-and-beam and the eccentric disk-on-disk. The performance of the resulting controllers is illustrated through both simulations and experimental results, showing the applicability of the design in a real setup.

Minimally invasive robotic surgery holds a fundamental role in modern surgery. However, one of its major limitations compared to classic laparoscopy is that the surgeon can only rely on visual perception, for the lack of haptic force feedback. A new solution for a force sensor placed at the end-tip of the trocar is presented here. This solution allows measuring the interaction forces between the surgical instrument and the environment without any changes to the instrument structure and with full adaptability to different robot platforms and surgical tools. A prototype of the sensor has been realized with 3D printed technology for a proof of concept. The static and dynamic characterization of the sensor is provided together with experimental validation.