In this paper, we present the new FPGA EMUlation (FEMU), an open-source and configurable emulation framework for prototyping and evaluating TinyAI heterogeneous systems (HS). FEMU leverages the capability of system-on-chip (SoC)-based FPGAs to combine the under-development HS implemented in a reconfigurable hardware region (RH) for quick prototyping with a software environment running under a standard operating system in a control software region (CS) for supervision and communication. To evaluate our approach, we built the X-HEEP FPGA EMUlation (X-HEEP-FEMU) platform by instantiating the proposed framework with real-world hardware and software components. X-HEEP-FEMU is deployed on the Xilinx Zynq-7020 SoC and integrates the eXtendible Heterogeneous Energy Efficient Platform (X-HEEP) host in the RH, a Linux-based Python environment on the ARM Cortex-A9 CS, and energy models derived from a TSMC 65 nm CMOS silicon implementation of X-HEEP, called HEEPocrates.

X-HEEP (eXtendable Heterogeneous Energy-Efficient Platform) is an open-source1, configurable, and extensible single-core RISC-V microcontroller developed at the Embedded Systems Laboratory (ESL) of EPFL for edge-computing platforms. X-HEEP can be used standalone as a low-cost microcontroller, or it can be integrated into existing platforms to act like a peripheral subsystem, or it can be extended and customized with external peripherals and accelerators nimbly. The latter is particularly appealing for novel accelerators, memories, or peripherals designers who desire a simple controller to drive their IP and communicate with the external world using software functions. X-HEEP is built on top of existing, mature open-source IPs such as CPUs, peripherals, and many other building blocks from the OpenHW Group, the PULP team from ETH Zurich and the University of Bologna, and lowRISC. Its contribution includes its expandability, configurability, and agile use, targetting a large number of users to take one step further towards the democratization of open-source hardware.

In the last years, remote health monitoring is becoming an essential branch of health care with the rapid development of wearable sensors technology. To meet the demand of new more complex applications and ensuring adequate battery lifetime, wearable sensors have evolved into multicore systems with advanced power-saving capabilities and additional heterogeneous components. In this article, we present an approach that applies optimization and parallelization techniques uncovered by modern ultralow power (ULP) platforms in the SW layers with the goal of improving the mapping and reducing the energy consumption of biomedical applications. Additionally, we investigate the benefit of integrating domain-specific accelerators to further reduce the energy consumption of the most computationally expensive kernels. Using 30-s excerpts of signals from two public databases, we apply the proposed optimization techniques on well-known modules of biomedical benchmarks from the state-of-the-art and two complete applications. We observe speed-ups of 5.17× and energy savings of 41.6% for the multicore implementation using a cluster of 8 cores with respect to single-core wearable sensor designs when processing a standard 12-lead electrocardiogram (ECG) signal analysis. Additionally, we conclude that the minimum workload required to take advantage of parallelization for a heartbeat classifier corresponds to the processing of 3-lead ECG signals, with a speed-up of 2.96× and energy savings of 19.3%. Moreover, we observe additional energy savings of up to 7.75% and 16.8% by applying power management and memory scaling to the multicore implementation of the 3-lead beat classifier and 12-lead ECG analysis, respectively. Finally,by integrating hardware (HW) acceleration we observe overall energy savings of up to 51.3% for the 12-lead ECG analysis.