Autonomous latching is essential for autonomous surface vessels (ASV) to reach full independence from human intervention. As part of the ASV Roboat project, a new solution for self-latching maneuvers has been developed and is presented here. We propose a system that has the key requirements of full integration with the navigation control system and zero-gap connection with the dock, the latter being essential for wireless charging of the ASV. Dedicated markers are used to identify docking targets, relying on computer vision algorithms to determine distance and bearing to the target. In its idle state, the locking solution uses mechanical power-off brakes, minimizing energy consumption while ensuring the boat stays in position indefinitely once docked. A prototype of the proposed mechanism has been built and installed in Roboat. Experimental tests showing the mechanism performance and capability to autonomously approach the docking station are discussed in this work.

This paper presents a novel autonomous surface vessel (ASV), called Roboat II for urban transportation. Roboat II is capable of accurate simultaneous localization and mapping (SLAM), receding horizon tracking control and estimation, and path planning. Roboat II is designed to maximize the internal space for transport, and can carry payloads several times of its own weight. Moreover, it is capable of holonomic motions to facilitate transporting, docking, and inter-connectivity between boats. The proposed SLAM system receives sensor data from a 3D LiDAR, an IMU, and a GPS, and utilizes a factor graph to tackle the multi-sensor fusion problem. To cope with the complex dynamics in the water, Roboat II employs an online nonlinear model predictive controller (NMPC), where we experimentally estimated the dynamical model of the vessel in order to achieve superior performance for tracking control. The states of Roboat II are simultaneously estimated using a nonlinear moving horizon estimation (NMHE) algorithm. Experiments demonstrate that Roboat II is able to successfully perform online mapping and localization, plan its path and robustly track the planned trajectory in the confined river, implying that this autonomous vessel holds the promise on potential applications in transporting humans and goods in many of the waterways nowadays.

In this paper, we present the design, modeling, and real-time nonlinear model predictive control (NMPC) of an autonomous robotic boat. The robot is easy to manufacture, highly maneuverable, and capable of accurate trajectory tracking in both indoor and outdoor environments. In particular, a cross type four-thruster configuration is proposed for the robotic boat to produce efficient holonomic motions. The robot prototype is rapidly 3D-printed and then sealed by adhering several layers of fiberglass. To achieve accurate tracking control, we formulate an NMPC strategy for the four-control-input boat with control input constraints, where the nonlinear dynamic model includes a Coriolis and centripetal matrix, the hydrodynamic added mass, and damping. By integrating “GPS” modules and an inertial measurement unit (IMU) into the robot, we demonstrate accurate trajectory tracking of the robotic boat along preplanned paths in both a swimming pool and a natural river. Furthermore, the code generation strategy employed in our paper yields a two order of magnitude improvement in the run time of the NMPC algorithm compared to similar systems. The robot is designed to form the basis for surface swarm robotics testbeds, on which collective algorithms for surface transportation and self-assembly of dynamic floating infrastructures can be assessed.