In this paper, a soft rotary wing robot capable of flight and control is presented. The Collapsible Airfoil Single Actuator ROtor-craft (CASARO) is a single actuator monocopter that derives its geometric properties from the Samara seed. CASARO achieves better flight efficiency, lift, and handling ergonomics by reducing its overall volume by 91.7% when collapsed and stowed. Unlike conventional rotorcraft, CASARO uses a non-rigid fabric wing to produce lift in flight. It utilizes the robot's rotational velocity to maintain tension within its fabric and airframe, providing adequate lift during its hover state. The conception, design, construction, and control of the soft monowing are demonstrated, including its capability to reduce its footprint with its soft fabric construction. To analyze the flight dynamics of CASARO, the craft is flown indoors autonomously, tracking its wing surface, craft body attitude, and position with various step inputs to observe different wing dynamics. CASARO is also capable of being deployed outdoors for real-life human-operated flight.

Feature-based methods are a popular method for camera state estimation using event cameras. Due to the spatiotemporal nature of events, all event images exhibit smearing of events analogous to motion blur for a camera under motion. As such, events must be motion compensated to derive a sharp event image. However, this presents a causality dilemma where motion prior is required to unsmear the events, but a sharp event image is required to estimate motion. While it is possible to use the IMU to develop motion prior, it has been shown that the limited dynamic range of$\pm \mathbf{2000}^{\circ}/\mathrm{s}$is insufficient for high angular rate rotorcrafts. Furthermore, smoothing of motion-compensated images due to actual event detection time latency in event cameras severely limits the performance of feature-based methods at high angular rates. This paper proposes a Fourier-based angular rate estimator capable of estimating angular rates directly on non-motion compensated event images. This method circumvents the need for external motion priors in camera state estimation and sidesteps problematic smoothing of features in the spatial domain due to motion blur. Lastly, using an NVIDIA Jetson Xavier NX, the algorithm is demonstrated to be real-time performant up to 3960°/s.

Automatic quantification of the left ventricle (LV) from cardiac magnetic resonance (CMR) images plays an important role in making the diagnosis procedure efficient, reliable, and alleviating the laborious reading work for physicians. Considerable efforts have been devoted to LV quantification using different strategies that include segmentation-based (SG) methods and the recent direct regression (DR) methods. Although both SG and DR methods have obtained great success for the task, a systematic platform to benchmark them remains absent because of differences in label information during model learning. In this paper, we conducted an unbiased evaluation and comparison of cardiac LV quantification methods that were submitted to the Left Ventricle Quantification (LVQuan) challenge, which was held in conjunction with the Statistical Atlases and Computational Modeling of the Heart (STACOM) workshop at the MICCAI 2018. The challenge was targeted at the quantification of 1) areas of LV cavity and myocardium, 2) dimensions of the LV cavity, 3) regional wall thicknesses (RWT), and 4) the cardiac phase, from mid-ventricle short-axis CMR images. First, we constructed a public quantification dataset Cardiac-DIG with ground truth labels for both the myocardium mask and these quantification targets across the entire cardiac cycle. Then, the key techniques employed by each submission were described. Next, quantitative validation of these submissions were conducted with the constructed dataset. The evaluation results revealed that both SG and DR methods can offer good LV quantification performance, even though DR methods do not require densely labeled masks for supervision. Among the 12 submissions, the DR method LDAMT offered the best performance, with a mean estimation error of 301 mm2for the two areas, 2.15 mm for the cavity dimensions, 2.03 mm for RWTs, and a 9.5% error rate for the cardiac phase classification. Three of the SG methods also delivered comparable performances. Finally, we discussed the advantages and disadvantages of SG and DR methods, as well as the unsolved problems in automatic cardiac quantification for clinical practice applications.

Pose estimation is of paramount importance for flight control as well as localization and navigation of Unmanned Aerial Vehicles (UAVs) to enable autonomous operations. In environments without GPS, such estimation can only be determined using onboard sensors; optical flow using a monocular camera is a popular approach. Monocopters are a class of nature inspired UAVs known as free rotors where their design and flight dynamics are inspired by the falling samara seed. With a constantly rotating body frame, free rotors introduces some unique challenges for visual perception required during optical flow sensing. This paper addresses these problems with the introduction of SHIFT (Selective Heading Image for Translation) that selects optimal images for determining translation with optical flow. It achieves this by decoupling rotation vectors about the optical axis from translation vectors in a flow field through the separate tracking of orientation and position using an Unscented Kalman Filter with phase correlation in the log-polar and spatial domain. The experiments show that SHIFT's estimation in orientation is stable even under sinusoidal excitation with a median absolute percentage errors of less than 1%. It is able to track position and orientation of a UAV accurately.