Perception systems for ornithopters face severe challenges. The harsh vibrations and abrupt movements caused during flapping are prone to produce motion blur and strong lighting condition changes. Their strict restrictions in weight, size, and energy consumption also limit the type and number of sensors to mount onboard. Lightweight traditional cameras have become a standard off-the-shelf solution in many flapping-wing designs. However, bioinspired event cameras are a promising solution for ornithopter perception due to their microsecond temporal resolution, high dynamic range, and low power consumption. This paper presents an experimental comparison between frame-based and an event-based camera. Both technologies are analyzed considering the particular flapping-wing robot specifications and also experimentally analyzing the performance of well-known vision algorithms with data recorded onboard a flapping-wing robot. Our results suggest event cameras as the most suitable sensors for ornithopters. Nevertheless, they also evidence the open challenges for event-based vision on board flapping-wing robots.

The development of perception and control methods that allow bird-scale flapping-wing robots (a.k.a. ornithopters) to perform autonomously is an under-researched area. This paper presents a fully onboard event-based method for ornithopter robot visual guidance. The method uses event cameras to exploit their fast response and robustness against motion blur in order to feed the ornithopter control loop at high rates (100 Hz). The proposed scheme visually guides the robot using line features extracted in the event image plane and controls the flight by actuating over the horizontal and vertical tail deflections. It has been validated on board a real ornithopter robot with real-time computation in low-cost hardware. The experimental evaluation includes sets of experiments with different maneuvers indoors and outdoors.

Automatic surveillance and monitoring using Unmanned Aerial Systems (UAS) require the development of perception systems that robustly work under different illumination conditions. Event cameras are neuromorphic sensors that capture the illumination changes in the scene with very low latency and high dynamic range. Although recent advances in eventbased vision have explored the use of event cameras onboard UAS, most techniques group events in frames and, therefore, do not fully exploit the sequential and asynchronous nature of the event stream. This paper proposes a fully asynchronous scheme for intruder monitoring using UAS. It employs efficient event clustering and feature tracking modules and includes a sampling mechanism to cope with the computational cost of event-by-event processing adapting to on-board hardware computational constraints. The proposed scheme was tested on a real multirotor in challenging scenarios showing significant accuracy and robustness to lighting conditions.

This paper presents an bio-inspired event-based perception scheme for agile aerial robot maneuvering. It tries to mimic birds, which perform purposeful maneuvers by closing the separation in the retinal image (w.r.t. the goal) to follow time-to-contact trajectories. The proposed approach is based on event cameras, also called artificial retinas, which provide fast response and robustness against motion blur and lighting conditions. Our scheme guides the robot by only adjusting the position of features extracted in the event image plane to their goal positions at a predefined time using smooth time-to-contact trajectories. The proposed scheme is robust, efficient and can be added on top of commonly-used aerial robot velocity controllers. It has been validated on-board a UAV with real-time computation in low-cost hardware during sets of experiments with different descent maneuvers and lighting conditions.