Despite the importance of sensitive skin for living creatures, most robots can feel contact on only a tiny fraction of their exterior, if at all. Furthermore, typical robot reactions to touch are limited to event-based acknowledgments, lacking perceptual richness, lifelike positive/negative responses, and temporal dynamics. We address these gaps by introducing a practical full-body tactile-perception system for social robots, turning a NAO robot into the Haptic Empathetic Robot Animal (HERA). The sixteen main regions of the robot's body are instrumented with soft resistive tactile sensors covered by a tailored koala suit. Windows of each time-varying sensor output are continually classified into five gestures at two intensities via a two-stage machine-learning model. On challenging testing data containing simultaneous contacts, touch detection achieves an F1 score of 0.773, and gesture recognition achieves 52.2% accuracy (5.2 times chance); considering the temporal, spatial, and semantic adjacency of the applied touches increases these metrics to 0.896 and 86.6%, respectively. In turn, each detected contact drives a real-time emotion model that represents the robot's affective state as a second-order dynamic system analogous to a mass-spring-damper. This model's parameters control the robot's disposition, stoicism, and calmness. We explain the connections between HERA's hardware and software subsystems and demonstrate their combined ability to create an affective robot that feels both touch and emotion.

Accurate 3D pose estimation of grasped objects is an important prerequisite for robots to perform assembly or in-hand manipulation tasks, but object occlusion by the robot's own hand greatly increases the difficulty of this perceptual task. Here, we propose that combining visual information and proprioception with binary, low-resolution tactile contact measurements from across the interior surface of an articulated robotic hand can mitigate this issue. The visuo-tactile object-pose-estimation problem is formulated probabilistically in a factor graph. The pose of the object is optimized to align with the three kinds of measurements using a robust cost function to reduce the influence of visual or tactile outlier readings. The advantages of the proposed approach are first demonstrated in simulation: a custom 15-DoF robot hand with one binary tactile sensor per link grasps 17 YCB objects while observed by an RGB-D camera. This low-resolution inhand tactile sensing significantly improves object-pose estimates under high occlusion and also high visual noise. We also show these benefits through grasping tests with a preliminary real version of our tactile hand, obtaining reasonable visuo-tactile estimates of object pose at approximately 13.3 Hz on average.

Humans can form an impression of how a new object feels simply by touching its surfaces with the densely innervated skin of the fingertips. Many haptics researchers have recently been working to endow robots with similar levels of haptic intelligence, but these efforts almost always employ hand-crafted features, which are brittle, and concrete tasks, such as object recognition. We applied unsupervised feature learning methods, specifically K-SVD and Spatio-Temporal Hierarchical Matching Pursuit (ST-HMP), to rich multi-modal haptic data from a diverse dataset. We then tested the learned features on 19 more abstract binary classification tasks that center on haptic adjectives such as smooth and squishy. The learned features proved superior to traditional hand-crafted features by a large margin, almost doubling the average F1score across all adjectives. Additionally, particular exploratory procedures (EPs) and sensor channels were found to support perception of certain haptic adjectives, underlining the need for diverse interactions and multi-modal haptic data.