Photovoltaic (PV) inverter manufacturers use custom, proprietary control approaches and topologies in their inverter design. The proprietary nature of these approaches makes it challenging to share electromagnetic transients (EMT) domain models for system studies. This research work presents an approach to develop EMT models from experimental data. We use novel approach in experimental design, high fidelity data collection, use of learning-based modeling, and co-simulation to reduce the time taken to develop an EMT model for an inverter under test (IUT). We used a 20 kW off-the-shelf grid following PV inverter and subjected the inverter to controlled tests. The tests include voltage and frequency step changes, as well as solar irradiance variations. The recorded high frequency data were used to train a neural network model representing the dynamic behavior of the IUT. The model was subsequently imported into an EMT tool using co-simulation techniques, and thus completing the modeling effort.

The escalating integration of inverter-based resources (IBRs) poses new challenges to power systems by introducing fast dynamics with higher frequencies, which may need to be simulated by an electromagnetic transient (EMT) program. As an alternative to conducting EMT simulations for the entire system, which is typically time consuming, hybrid simulation between EMT and phasor-domain transient stability (TS) can greatly reduce the computational burden while preserving the detailed fast dynamics in the EMT zone. This paper establishes an EMT-TS hybrid simulation platform using open-source tools, specifically ParaEMT, GridPACK, and HELICS, which are the EMT simulator, TS simulator, and interface framework, respectively. Case studies on the 240-bus Western Electricity Coordinating Council (WECC) system demonstrate that the developed ParaEMT-HELICS-GridPACK hybrid simulator can accurately capture both slow electromechanical and fast IBR-driven dynamics with a 2.4× speedup.

In this work we present a set of integrated methods that enable an RFID-enabled mobile manipulator to approach and grasp an object to which a self-adhesive passive (battery-free) UHF RFID tag has been affixed. Our primary contribution is a new mode of perception that produces images of the spatial distribution of received signal strength indication (RSSI) for each of the tagged objects in an environment. The intensity of each pixel in the 'RSSI image' is the measured RF signal strength for a particular tag in the corresponding direction. We construct these RSSI images by panning and tilting an RFID reader antenna while measuring the RSSI value at each bearing. Additionally, we present a framework for estimating a tagged object's 3D location using fused ID-specific features derived from an RSSI image, a camera image, and a laser range finder scan. We evaluate these methods using a robot with actuated, long-range RFID antennas and finger-mounted short-range antennas. The robot first scans its environment to discover which tagged objects are within range, creates a user interface, orients toward the user-selected object using RF signal strength, estimates the 3D location of the object using an RSSI image with sensor fusion, approaches and grasps the object, and uses its finger-mounted antennas to confirm that the desired object has been grasped. In our tests, the sensor fusion system with an RSSI image correctly located the requested object in 17 out of 18 trials (94.4%), an 11.1% improvement over the system's performance when not using an RSSI image. The robot correctly oriented to the requested object in 8 out of 9 trials (88.9%), and in 3 out of 3 trials the entire system successfully grasped the object selected by the user.

A multi-user, polyphonic sensor stage environment that maps position and gestures of up to four performers to the pitch and articulation of distinct notes is presented. The design seeks to provide multiple players on a stage with the feeling of a traditional acoustic instrument by giving them complete control over the instrument's expressive parameters and a clear causal connection between their actions and the resulting sound. The positions of the performers are determined by a custom ultrasonic tracking system, while hand motions are measured by custom-made gloves containing accelerometer units. Furthermore, juggling clubs are illuminated dynamically to make complex juggling patterns more apparent. The system is currently on tour with the Flying Karamazov Brothers juggling troupe.