In agricultural robotics, effective observation and localization of fruits present challenges due to occlusions caused by other parts of the tree, such as branches and leaves. These occlusions can result in false fruit localization or impede the robot from picking the fruit. The objective of this work is to push away branches that block the fruit’s view to increase their visibility. Our setup consists of an RGB-D camera and a robot arm. First, we detect the occluded fruit in the RGB image and estimate its occluded part via a deep learning generative model in the depth space. The direction to push to clear the occlusions is determined using classic image processing techniques. We then introduce a 3D extension of the 2D Hough transform to detect straight line segments in the point cloud. This extension helps detect tree branches and identify the one mainly responsible for the occlusion. Finally, we clear the occlusion by pushing the branch with the robot arm. Our method uses a combination of deep learning for fruit appearance estimation, classic image processing for push direction determination, and 3D Hough transform for branch detection. We validate our perception methods through real data under different lighting conditions and various types of fruits (i.e. apple, lemon, orange), achieving improved visibility and successful occlusion clearance. We demonstrate the practical application of our approach through a real robot branch pushing demonstration.

Can robots mold soft plastic materials by shaping depth images? The short answer is no: current day robots can not. In this article, we address the problem of shaping plastic material with an anthropomorphic arm/hand robot, which observes the material with a fixed depth camera. Robots capable of molding could assist humans in many tasks, such as cooking, scooping, or gardening. Yet, the problem is complex, due to its high-dimensionality at both perception and control levels. To address it, we design three alternative data-based methods for predicting the effect of robot actions on the material. Then, the robot can plan the sequence of actions and their positions, to mold the material into a desired shape. To make the prediction problem tractable, we rely on two original ideas. First, we prove that under reasonable assumptions, the shaping problem can be mapped from point cloud to depth image space, with many benefits (simpler processing, no need for registration, lower computation time, and memory requirements). Second, we design a novel, simple metric for quickly measuring the distance between two depth images. The metric is based on the inherent point cloud representation of depth images, which enables direct and consistent comparison of image pairs through a nonuniform scaling approach, and therefore opens promising perspectives for designingdepth image-basedrobot controllers. We assess our approach in a series of unprecedented experiments, where a robotic arm/hand molds flour from initial to final shapes, either with its own dataset, or by transfer learning from a human dataset. We conclude the article by discussing the limitations of our framework and those of current day hardware, which make human-like robot molding a challenging open research problem.