In this paper we introduce an adaptive control scheme for robots with elastic joints (in particular for the DLR medical robot) in order to increase the positioning accuracy and the performance of control with respect to uncertainties of the parameters of the robot dynamics. In order to design control and analyze system stability a static friction model is applied which describes Coulomb, viscose and load dependent friction. A stability analysis is done for this adaptive control scheme, allowing a Lyapunov based convergence analysis in the context of the nonlinear robot dynamics. Experimental results validate the practical efficiency of the approach.

This video presents the in-house developed DLR MiroSurge robotic system for surgery. As shown, the system is suitable for both minimally invasive and open surgery. Essential part of the system is the MIRO robot: The soft robotics feature enables intuitive interaction with the robot.

In this paper we introduce a friction observer for robots with joint torque sensing (in particular for the DLR medical robot) in order to increase the positioning accuracy and the performance of torque control. The observer output corresponds to the low-pass filtered friction torque. It is used for friction compensation in conjunction with a MIMO controller designed for flexible joint arms. A passivity analysis is done for this friction compensation, allowing a Lyapunov based convergence analysis in the context of the nonlinear robot dynamics. For the complete controlled system, global asymptotic stability can be shown. Experimental results validate the practical efficiency of the approach.

The paper describes the modeling and control of a robot with flexible joints (the DLR medical robot), which has strong mechanical couplings between pairs of joints realized with a differential gear-box. Because of this coupling, controllers developed before for the DLR light-weight robots cannot be directly applied. The previous control approach is extended in order to allow a multi-input-multi-output (MIMO) design for the strongly coupled joints. Asymptotic stability is shown for the MIMO controller. Finally, experimental results with the DLR medical robot are presented.

This paper presents a novel system for accurate placement of pedicle screws. The system consists of a new light-weight (<10 kg), kinematically redundant, and fully torque controlled robot. Additionally, the pose of the robot tool-center point is tracked by an optical navigation system, serving as an external reference source. Therefore, it is possible to measure and to compensate deviations between the intraoperative and the preoperatively planned pose. The robotic arm itself is impedance controlled. This allows for a new intuitive man-machine-interface as the joint units are equipped with torque sensors: the robot can be moved just by pulling/pushing its structure. The surgeon has full control of the robot at every step of the intervention. The hand-eye-coordination problems known from manual pedicle screw placement can be omitted