We present NIMS3D, a novel 3-D cabled robot for actuated sensing applications. We provide a brief overview of the main hardware components. Next, we describe installation procedures, including novel calibration methods, that enable rapid in-field deployability for nonexpert end users, and provide simulations and experimental results to highlight their effectiveness. Kinematic and dynamic analysis of the system are provided, followed by a description of control methods. We provide experimental results that illustrate tracking of linear and nonlinear paths by NIMS3D. Thereafter, we briefly present an example of an actuated sensing task performed by the system. Finally, we describe methods of improving energy efficiency by leveraging nonlinear trajectories and energy-optimal tension distributions. Experimental and simulated results show that energy efficiency can be improved significantly by using optimized parabolic trajectories. Furthermore, we provide simulation results that demonstrate improved efficiency enabled by optimal, least norm tension distributions.

In this paper we describe an algorithm to generate energy efficient trajectories for NIMS3D, a three-dimensional cabled robotic platform. Optimized parabolic paths are used to exploit the relatively low I2R loss associated with operation in lower regions of the workspace. Trajectory optimization is sufficiently fast to enable real time operation. Experimental results on a physical system for a three cable deployment show substantial reductions in energy consumption as compared to linear trajectories.

In this paper we present algorithms that enable precise trajectory control of NIMS3D, an underconstrained, three-dimensional cabled robot intended for use in actuated sensing. We begin by offering a brief system overview and then describe methods to determine the range of operation of the robot. Next, a discrete-time model of the system is presented. Thereafter, we present an online algorithm for modeling motor behavior. The majority of the paper is dedicated to describing three feedback control laws used to enable accurate trajectory tracking for both linear and non-linear motion profiles. We present experimental results that highlight the strengths and weaknesses of these mechanisms and conclude by offering a series of future plans for NIMS3D.