With the vast demand in marine development, robotic fish show promising potential in underwater exploration for their high-performance propulsion ability. However, fish-inspired robots are yet to utilize the structural flexibility of rhythmic actuation such as bony fish (Osteichthyes). The Body and Caudal Fin (BCF) locomotion in fish optimizes the use of muscle power and body flexibility by synchronizing muscle activation with the undulating-oscillatory tail-flapping, such as Thunniform, while robotic fish are primarily designed as motion trackers rather than as efficient swimmers. In this paper, we propose a power allocation strategy (PAS) that imitates muscle rhythmic actuation, which increases the flapping amplitude by the coupling of the peduncle motion and the tail deformation. Inspired by this peduncle-tail mechanism, we developed a Direct-Drive Fish Robot (DDRFishBot). The DDRFishBot is enhanced by our developed PAS in Tail-Elastic Potential Energy (T-EPE) release by 228%, in propulsion by 45.6% and in efficiency coefficient by 16.3%. This study establishes the performance enhancement principle of exploiting tail flexibility through a simple scotch yoke mechanism, expanding the performance space of fish-inspired tail-flapping swimming robot.

Sampling-based planning algorithms such as RRT have been proved to be efficient in solving path planning problems for robotic systems. Various improvements to the RRT algorithm have been presented to improve the performance of the extension and convergence of the random trees, such as Informed RRT*. However, with the growth of spatial dimensions, the time consumption of randomly sampling the entire state space and incrementally rewiring the random trees raises drastically before a feasible solution is found. In this paper, to enhance the convergence performance of optimal solutions, we present Reconstructed Bi-directional Informed RRT* (RBI-RRT*) path planning algorithm. The algorithm acts as RRT-Connect to rapidly find a feasible solution, which helps compress the sampling space as Informed RRT* does. After the random trees are transformed into RRT* structure by the reconstruction process in RBI-RRT*, the algorithm continues to find the near-optimal path. A series of simulations and real-world robot experiments were conducted to evaluate the algorithm against existing planning algorithms. Compared to Informed RRT* Connect, RBI-RRT* reduced the computation time of achieving a specific cost by 22.1% on average in simulations and 11.2% in the real-world robotic arm experiments. The results show that RBI-RRT* is more efficient in high-dimensional planning problems.

Proprioception and variable stiffness are two trending topics in soft robotics research. The former could endow soft robots with the ability to perceive the environment as well as their internal states without the need of dedicated sensors, while the latter could strengthen the otherwise excessive compliance, enabling soft robots for tasks which require a higher force. Both directions have been extensively reported in existing literature, achieving both concurrently was even more challenging. The major limiting factor was the limited stiffness due to the hyper elasticity of conventional soft robots, which increases the difficulties in capturing the continues deformation. In this work, we proposed an alternative approach to tackle these two challenges, a novel “tune-down” approach, combining proprioception with stiffness regulation and implemented over-constrained soft robotic joint designs to further strengthen this spirit. As a result, the soft robotic joint could achieve multi-directional proprioception, as well as variable stiffness tuning, concurrently, using merely an on-board sensor for basic pneumatic control. The concept, design, modeling, actuation/control, and experimental validation were presented in detail, demonstrating the efficacy and potential of the proposed approach.

Fast-growing interests in safe and effective robot-environment interactions stimulated global investigations on soft robotics. The inherent compliance of soft robots ensures promising safety features but drastically reduces force capability, thereby complicating system modeling and control. To tackle these limitations, a soft robotic joint with enhanced strength, servo performance, and impact behavior shaping is proposed in this paper, based on novel three-dimensional-printed soft origami rotary actuators. The complete workflow is presented from the concept of origami design and analytical modeling, joint design, fabrication, control, and validation experiments. The proposed approach facilitates a fully customizable joint design towards the desired force capability and motion range. Validation results from models and experiments using multiple fabricated prototypes proved the excellent performance linearity and superior force capability, with 18.5-N·m maximum torque under 180 kPa, and 300-g self-weight. The behavior shaping capability is achieved by a low-level joint-angle servo and a high-level variable-stiffness regulation; this significantly reduces the impact torque by 53% and ensures powerful and safe interactions. The comprehensive guidelines provide insightful references for soft robotic design for wider robotic applications.